The Reuleaux by JayBo Designs

[nelsonm64]

I like the quality of the ones posted above. I really want the camo print one from FT but, it's made very cheaply I think

$2.36 Protective Silicone Sleeve Case for Wismec Reuleaux RX200 200W Mod at FastTech - Worldwide Free Shipping

 

[Mowgli]

I found one on eBay. They state they are specific for either DNA200 or RX200 for $12.95. Tons of colors to choose from and free shipping. Must be the firing buttons that are a little different as well as the screen window.
Silicone Case for Wismec Reuleaux DNA 200 Sleeve DNA200 Cover Skin Wrap

Just bought a Red/Black one.

I bought red/black skins from them for numerous mods. Very good quality

Might as well get some more mileage from my original FB post

 

[Daddy]

You guys seen WUD Wraps?

Unfortunately they don't wrap the top and bottom - just the sides - but it is a good alternative to the silicone sleeves if you like a wood look. I put a WUD Wrap on an x cube 2 and really like it.

 

[Tpat591]

Haven't been paying attention to prices on these lately but I see ecig.com just added Wismec Reuleaux DNA 200w Box Mod - Silver - ecig.com | Electronic Cigarettes.
$119.25 w/o batteries, 132.25 w/ LG HE2s

 

[ahmadmfz]

Hello everyone. Just wondering if anyone has a similar problem to mine? I read through the pages but there was nothing comprehensive.

I'm running my reuleaux with LG HG2s. In escribe i'm running the available CSV file for these batteries. 11.1 nominal volts, 3000mah for each battery. Soft cell cut off at 2.85V.

When I go through use, the board will tell me to check my battery around 30%. I can still fire if it goes below 20w but nothing above it. I've tried to increase the cut off to stock 3.09 but I'm still getting the same issues. It just keeps telling I've to check batteries when they're at 30%. I've checked and the batteries are all even so it isn't an inbalanced charge problem. I'll try with another set of batteries but they have yet to arrive so was just wondering if i'm doing anything wrong in the settings.

I'm running nickel 0.09ohm, 40w @420f.

 

[Daddy]

I have my LGHG2's soft cut off set at 2.5 volts.

Rather then relying on someone else's CVS file, you should run the analyzer on your own specific batteries.

 

[AtmizrOpin]

Hello everyone. Just wondering if anyone has a similar problem to mine? I read through the pages but there was nothing comprehensive.

I'm running my reuleaux with LG HG2s. In escribe i'm running the available CSV file for these batteries. 11.1 nominal volts, 3000mah for each battery. Soft cell cut off at 2.85V.

When I go through use, the board will tell me to check my battery around 30%. I can still fire if it goes below 20w but nothing above it. I've tried to increase the cut off to stock 3.09 but I'm still getting the same issues. It just keeps telling I've to check batteries when they're at 30%. I've checked and the batteries are all even so it isn't an inbalanced charge problem. I'll try with another set of batteries but they have yet to arrive so was just wondering if i'm doing anything wrong in the settings.

I'm running nickel 0.09ohm, 40w @420f.

you could be getting check battery message because of the dna reuleaux's way of doing reverse batt protection. the circular lips of the positive terminals on the sled sometimes keep one or two of the batteries from making full contact. rotate your batts around and while in the mod's sled spin them a few times, it helps to seat them a little better into those plastic reverse battery protectors. some batts fit better and make better connection than other.

 

[ahmadmfz]

you could be getting check battery message because of the dna reuleaux's way of doing reverse batt protection. the circular lips of the positive terminals on the sled sometimes keep one or two of the batteries from making full contact. rotate your batts around and while in the mod's sled spin them a few times, it helps to seat them a little better into those plastic reverse battery protectors. some batts fit better and make better connection than other.

This might be a solution, but you see this problem doesn't occur when the battery is near full capacity.


Sent from my iPhone using Tapatalk

 

[AtmizrOpin]

what do each of the batts read when this problem occurs? in escribe's device monitor and with a seperate multi meter. you're géting check batter or weak battery? a premature weak battery message would mean your watt hours are set incorrectly and you really should run batt analyyzer for yourself. check battery means that the pack or in our case the lg hg2's aren't providing the necessary volt/amps to maintain a set wattage.

edit.......also when your batts are full, even tho one or two aren't making the greatest comnection, it's still connectiñg somewhat. then as the batts drain that poor connection is revealed as a check battry message.

 

[ambientech]

Haven't been paying attention to prices on these lately but I see Ecig.com just added Wismec Reuleaux DNA 200w Box Mod - Silver - ecig.com | Electronic Cigarettes.
$119.25 w/o batteries, 132.25 w/ LG HE2s

FYI They have great prices but are very very slow to ship. I ordered Reuleaux dna 200 from them Friday before 11am central and it still hasn't shipped. I don't expect shipping on weekend but when your site say's ship same day if ordered before 11am central I do expect it to ship faster than this. I ordered from them seeing they ship from Austin and I'm 15 minutes from Austin. Thought I would get it much quicker than ordering from across the country. Should have ordered it from VapeNW because my orders from them get here faster than this place processes orders.

 

[Wingsfan0310]

FYI They have great prices but are very very slow to ship. I ordered Reuleaux dna 200 from them Friday before 11am central and it still hasn't shipped. I don't expect shipping on weekend but when your site say's ship same day if ordered before 11am central I do expect it to ship faster than this. I ordered from them seeing they ship from Austin and I'm 15 minutes from Austin. Thought I would get it much quicker than ordering from across the country. Should have ordered it from VapeNW because my orders from them get here faster than this place processes orders.

That's strange. I ordered it on Saturday and it shipped on Monday, via 2 day priority mail (free shipping). Check your spam folder or log into the site if you already haven't. I'd definitely call them if it still hasn't shipped (they have a toll free number).

Cheers,
Steve

 

[retird]

(free shipping by the way)

What it says about shipping from Austin:

Standard Shipping
We ship from Austin TX on business days when we receive your order. You'll receive a tracking number by email so you can check the status of your order as it is being shipped to you. To receive same day processing, please place an order before 11:00am central. Please note that we do not ship on weekends or holidays as our carrier does not accept deliveries on those days. We can't cancel or edit any order that has been sent for delivery. To edit your order, contact us immediately. Right now, we ship USPS and they have a tendency of messing up tracking numbers and delivery times. Standard shipping is 3-5 days however once the shipment has left our warehouse we are unable to provide any more information than what is displayed on the USPS tracking system.

 

[ambientech]

What it says about shipping from Austin:
Already checked site and it still say's processing.
Standard Shipping
We ship from Austin TX on business days when we receive your order. You'll receive a tracking number by email so you can check the status of your order as it is being shipped to you. To receive same day processing, please place an order before 11:00am central. Please note that we do not ship on weekends or holidays as our carrier does not accept deliveries on those days. We can't cancel or edit any order that has been sent for delivery. To edit your order, contact us immediately. Right now, we ship USPS and they have a tendency of messing up tracking numbers and delivery times. Standard shipping is 3-5 days however once the shipment has left our warehouse we are unable to provide any more information than what is displayed on the USPS tracking system.

So I got the shipping part wrong. Same day processing, still say's processing.....

 

[ambientech]

That's strange. I ordered it on Saturday and it shipped on Monday, via 2 day priority mail (free shipping). Check your spam folder or log into the site if you already haven't. I'd definitely call them if it still hasn't shipped (they have a toll free number).

Cheers,
Steve

I checked site and it say's processing. Will call them tomorrow if it still hasn't shipped.

 

[Tpat591]

Always had lightning fast shipping from them. Very surprised yours was delayed. Maybe they had an inventory issue and had to back order, but I would think they would have contacted you quickly about that.

 

[deucesjack]

Always had lightning fast shipping from them. Very surprised yours was delayed. Maybe they had an inventory issue and had to back order, but I would think they would have contacted you quickly about that.

Same here. 2 days to NY all the time.

Sent from my SAMSUNG-SM-N915A using Tapatalk

 

[Blkboyan]

Here is Mine.

 

[BreSha6869]

My Fasstech "white" RX200 showed up today. Wow. That is one crazy colour combination!

MUCH brighter than the pic. Holy '57 Chevy!

Funny... I bought a cheap cover for my black RX200 earlier today... It's now on the white RX200.

Just a PSA... This is a bright and crazy looking mod for sure!

 

[AtmizrOpin]

My Fasstech "white" RX200 showed up today. Wow. That is one crazy colour combination!

MUCH brighter than the pic. Holy '57 Chevy!

Funny... I bought a cheap cover for my black RX200 earlier today... It's now on the white RX200.

Just a PSA... This is a bright and crazy looking mod for sure!

you'll like this thread then

WISMEC Reuleaux RX200 TC

 

[Tpat591]

My Fasstech "white" RX200 showed up today. Wow. That is one crazy colour combination!

MUCH brighter than the pic. Holy '57 Chevy!

Funny... I bought a cheap cover for my black RX200 earlier today... It's now on the white RX200.

Just a PSA... This is a bright and crazy looking mod for sure!

Had a real problem with that color combination myself but have an evic vtc in white and it is one of my favorites. figured I would repaint the faceplate & battery door if I could match the paint. Only ordered it because I love my DNA200 reux and got the black rx200 for possible conversion. I liked it enough to order 2 more rx200 especially because I don't have to convert them right away and can use them as is. Can't go wrong for the price.

Dreading seeing that color scheme in person though!