The VapeMate Juice Feeder by SuperT!

[Technonut]

Very nice of you Parallex2... Even if some folks want to mod the tips to fit the VM, It is worth the small effort. These bottles are soft, made to be squeezed, and perfect for the VM / other juiceboxes. I would like to have a bunch to mix different tobacco blends / other flavors to steep, and be ready to roll when I want to use them. I have the the VM, another juicebox, and am awaiting delivery of a REO Grand.. I will put what I get to good use for sure..

Please PM me when they arrive...

Techonut,

I have use for a lot of those bottles so I ordered the 100 lot. I'll post a thread when I get them and folks can just say how many they want. Price will be the actual cost and the cheapest postage I can find to keep the cost down. That way nobody's cost goes up because of shipping if they only want a few.

 

[skullfreak]

Just wanted to say just because the vm was not for me don't let it discourage anyone from buying.
most my juice is clear or a lite color so I was hard for me to tell how much I was driping.

 

[grimmer255]

No, they won't be ready for a few weeks yet, i still need to perfect the design and also see if i can alter the desgn to work with the high bridge on some of those short 801's, that normal drip tips won't fit into. It'll be awhile, but it'll be a well designed adapter when i'm done.

yes I can't wait to get it....

 

[grimmer255]

Cool, I have 500 of them coming. Everyone who bought a VapeMate can have two and i'll include two in new shipments of VapeMates as well as put them up on the website once i get them in for those who want extras.

that is awesome... thanx. the 15 ml bottle Im using is just a little to big on S6

 

[forcedfuel50]

Come on Grimdog, i got a 30ml bottle on my p16

 

[dannoman]

Tech what do you mean by the drop topper...this seems liek would be a good tip as the sight glass would show a perfect amt to wet the atty and when you say shoot-her-in you are saying you do a squeeze of the bottle and the air forces the juice in without shottign too much juice?

Good tip!

 

[grimmer255]

Come on Grimdog, i got a 30ml bottle on my p16

lol.... 15mls is good for home but 6ml bottle would be nice for the go.


By the way I'm loving the VapeMate on the mini 801 to the 510 cartos... thats right the juice feeder works well with cartos if you tilt the feeder down towards the juice bottle it feeds to the side..... anyway thanks again for the awesome juice feeder.

 

[Para]

Very nice of you Parallex2... Even if some folks want to mod the tips to fit the VM, It is worth the small effort. These bottles are soft, made to be squeezed, and perfect for the VM / other juiceboxes. I would like to have a bunch to mix different tobacco blends / other flavors to steep, and be ready to roll when I want to use them. I have the the VM, another juicebox, and am awaiting delivery of a REO Grand.. I will put what I get to good use for sure..

Please PM me when they arrive...

Will do. Help me keep up with who has expressed interest so we can contact them first when we make the thread. Based on the seller's emails, I figure them to be here by the end of next week.

Doing some quick math in my head, it will cost about $2.50 for 5....shipped.

 

[Johnny 5]

These bottles are all soft, the 3cc will not fit but the 6, 10 and 15 do. You have to either modify the tip or use it without the tip.
Cylinder and Boston Round Bottles with Dropper Caps | U.S. Plastic Corp.

 

[ukeman]

did you work out the shipping for such a small order; say 10 bottles?

These bottles are all soft, the 3cc will not fit but the 6, 10 and 15 do. You have to either modify the tip or use it without the tip.
Cylinder and Boston Round Bottles with Dropper Caps | U.S. Plastic Corp.

 

[Drumonron]

Order placed....Thanks Dave... I look forward to trying this out with all of my devices but especially the Precise 18650!

Also, I tried to order the 10440 AW batteries but couldn't add them to my order...if you have them would you please send me about 4....charge me....let me know.

 

[HzG8rGrl]

I have found that quite a few of my 6 and 10 ml bottles fit without the dripper/nipple and they are not the childproof kind. So you may have bottles that will work, just without the dripper top, or Modify.
They are 6 and 10 ml from BackwoodsBrew, the 10ml from MsTs, the 6ml from VaporBomb and I have 6ml from NHaler and PureSmoker line that all fit with out the dripper/nipple.

I am trying to locate the smaller shaped bottles like mine that work with the dripper tip left in place. I need a couple days for responses to come in from suppliers and one actual order from Goodprophets (want to make sure they fit first). None of the bottles I have tried and that work have a child safety type cap. Exception of one and that bottle is hard to squeeze, from wordup ecig-10ml.

I have about 30 sets of the 6ml that fit-just the dripper/nipple doesn't. They are new, never used. If you can't wait for me to find the smaller bottles that work with dripper/nipple I will be willing to get you the 6ml at cost of shipping plus something for bottle. I have no clue what I paid for them. Purchased through a co-op on another board.

 

[Teach]

I have those same 6ml bottles. They will work and not leak without the tip, but when you want to make a flavor change it's quite messy. I modified the tip on mine by cutting it about half way down. If you look closely at the tip you will see a ring, cut just above that. Then I used a (new clean) pencil sharpener to shave some of the girth off. Work perfect without the mess now.

Thanks for the idea Johnny 5 - couldn't find a regular sharpener (left most of them at school, wouldn't you know!), but I did find my carpenter's pencil sharpener in my tool box. It's a big one for sharpening the flat construction pencils - it did shave off a layer of the outer shoulder rim to, but it didn't effect the fit to the bottle. These have a curved blade and will take off enough in one pass.

 

[leroytwohawks]

did you work out the shipping for such a small order; say 10 bottles?

I found them on ebay a couple of weeks ago here: 10 CLEAR 3 ml PLASTIC SQUEEZE DROPPER BOTTLES with CAPS - eBay (item 200473219502 end time Dec-12-10 10:40:19 PST) although with there shipping it works out to almost $1 a bottle.

Kevin

 

[HzG8rGrl]

I found them on ebay a couple of weeks ago here: 10 CLEAR 3 ml PLASTIC SQUEEZE DROPPER BOTTLES with CAPS - eBay (item 200473219502 end time Dec-12-10 10:40:19 PST) although with there shipping it works out to almost $1 a bottle.

Kevin

I have not found a 3ml threading that works-plus, we cannot see what type of dripper/nipple that one has on it. Thanks for helping!

 

[Technonut]

I woke-up in the middle of the night with nothing better to do, so.....

I've been using the included VM -O- ring from the begining, and decided to put the dropper tip back in to see how much needed shaved-down. Well, I screwed it in as far as it would go. Then for grins & giggles, I wanted to see how much it leaked.. IT DOES NOT!

I've been using it for hours without any leaking at all. The bottle goes back into shape quickly when released, and while I am going to take the dropper tip back off since I prefer to use the VM without it, I thought I would give everyone a heads-up.

Here are a couple of pics: (Click To Enlarge)

 

[KonaNeil]

Did USPS tracking work for this shipment? I ask because I'm still getting:

"The U.S. Postal Service was electronically notified by the shipper on November 09, 2010 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Information, if available, is updated periodically throughout the day. Please check again later."

Living in the islands, it usually takes an extra day for packages to be delivered. However, I've never seen the post office be noncommittal for this long. Thus, I'm wondering if a postal worker somewhere is enjoying my new VapeMate.

 

[ukeman]

hey Neil Hows'it?
I'm on Kauai, and waiting for mine too!

 

[Teach]

My shipping information went in on the 9th in MN and it wasn't scanned untill the 12th in Tampa. No more scans until south FL on the 13th. I think it just depends on whether or not it's scanned and uploaded and when somebody hits the update button on the server. I thought it was all automated, but I'm wondering.

 

[forcedfuel50]

I woke-up in the middle of the night with nothing better to do, so.....

I've been using the included VM -O- ring from the begining, and decided to put the dropper tip back in to see how much needed shaved-down. Well, I screwed it in as far as it would go. Then for grins & giggles, I wanted to see how much it leaked.. IT DOES NOT!

I've been using it for hours without any leaking at all. The bottle goes back into shape quickly when released, and while I am going to take the dropper tip back off since I prefer to use the VM without it, I thought I would give everyone a heads-up.

Here are a couple of pics: (Click To Enlarge)

Good to hear! In my testing, i've never had it leak. The only way it can leak is if one were to use the wrong bottle or not screw it down tight! Thats the beauty of the one piece design.