- Status
Went to build one of my KF4's I cleaned last week and the Base is stuck together, as in the airflow ring will not spin at all? Guess ima have to break out some pliers.. But thats for another day.. still dont have much energy.. 
*Burp*
Bit tipsy!, total lightweight here, had two beers and a white Russian, moaar dan enuff!, wot time is it over there? gowan, your round!
Hope you guys are having a great weekend!, booyah!
Bit tipsy!, total lightweight here, had two beers and a white Russian, moaar dan enuff!, wot time is it over there? gowan, your round!
Hope you guys are having a great weekend!, booyah!
Went to build one of my KF4's I cleaned last week and the Base is stuck together, as in the airflow ring will not spin at all? Guess ima have to break out some pliers.. But thats for another day.. still dont have much energy..
Same here. I started my antibiotics last night, but it's certainly not an "instant fix" -- I took a nap today, and woke up with ZERO energy. So my husband went and got himself Taco Bell for dinner, and I had most of a can of soup -- not because I really wanted anything, but just 'cuz I need energy for healing. Maybe tomorrow I'll feel well enough to cook; I had thought about sweet & sour chicken for tonight, but with zero appetite and zero energy... nah, that ain't happening.
Andria
It definitely sucks.. Specially because I had to take a med that was an Immune Suppressant when I was younger. Blah!Same here. I started my antibiotics last night, but it's certainly not an "instant fix" -- I took a nap today, and woke up with ZERO energy. So my husband went and got himself Taco Bell for dinner, and I had most of a can of soup -- not because I really wanted anything, but just 'cuz I need energy for healing. Maybe tomorrow I'll feel well enough to cook; I had thought about sweet & sour chicken for tonight, but with zero appetite and zero energy... nah, that ain't happening.
Andria
Hope you get to feeling better!!
I think I've found my sweet spot in the Velocity.
Triple parallel 30awg/0.25mm, 2.4mm ID, 9Wrap (27 total per coil), comes out to 0.8 ohms per coil.
Used 28awg and it was too slow to heat up at my preferred 75mW/mm^2. That's 30W.
Now I can take a nice long drag with warm vapor and lots-o-da-clouds...
Triple parallel 30awg/0.25mm, 2.4mm ID, 9Wrap (27 total per coil), comes out to 0.8 ohms per coil.
Used 28awg and it was too slow to heat up at my preferred 75mW/mm^2. That's 30W.
Now I can take a nice long drag with warm vapor and lots-o-da-clouds...
Last edited:
It definitely sucks.. Specially because I had to take a med that was an Immune Suppressant when I was younger. Blah!
Hope you get to feeling better!!
Thx, same to you!
Just goes to show you what idiots doctors are, even the good ones -- he also prescribed Flonase, which is a steroidal drug -- even though I'm already taking a steroid in my Advair! No thanks doc, I'll pass on double-steroids. I'm already
enough! And if my insomnia got any worse, I might as well just get rid of my bed and put a couch in my room! 
And why a steroidal drug is available OTC, I will NEVER understand.
Andria
Poke a jewelers screwdriver in one of the air holes then with a wide rubber band like the ones from fresh store broccoli, put the band on the base or tank and turn what you need to get off. Don't forget the base will not unscrew unless the juice control is open.Went to build one of my KF4's I cleaned last week and the Base is stuck together, as in the airflow ring will not spin at all? Guess ima have to break out some pliers.. But thats for another day.. still dont have much energy..
Pile of vapemail and wife needed a new laptop so off to the Apple store an hour away then daughters birthday then grandsons tomorrow plus mothers and ..............
Are ya kidding me??
Got some play time.
Dual deck for Squape. I got the SXK deck which is a direct drop in. Quick build and what was a great tank is now a fantastic tank. Duals really make everything better.
The cReo works PERFECT!!!!!!!!!!
The Chalice?? Its not as bad as I thought. If building a deck was woodworking the Chalice is dollhouse furniture. But at 1ohm is pretty tame. Airflow is poor but way wore then you'd think. The quality of the clone is really good. Flavor is low as I would expect with such low air. Clouds don't exist at this level.With such poor air I'm taking longer pulls then I like and not enough wick soooooooooooooooooo DRYHITS!!!!! I've taken some brutes.
Velocity with BF pin on the way from Eciggity.
I really like it. Don't think it will ever be my "thing" but its fun. Its very big for what it is. Roughly the same footprint and an inch shorter then the SX with a tank. Giving up alot of features to save an inch.
Are ya kidding me??
Got some play time.
Dual deck for Squape. I got the SXK deck which is a direct drop in. Quick build and what was a great tank is now a fantastic tank. Duals really make everything better.
The cReo works PERFECT!!!!!!!!!!
The Chalice?? Its not as bad as I thought. If building a deck was woodworking the Chalice is dollhouse furniture. But at 1ohm is pretty tame. Airflow is poor but way wore then you'd think. The quality of the clone is really good. Flavor is low as I would expect with such low air. Clouds don't exist at this level.With such poor air I'm taking longer pulls then I like and not enough wick soooooooooooooooooo DRYHITS!!!!! I've taken some brutes.
Velocity with BF pin on the way from Eciggity.
I really like it. Don't think it will ever be my "thing" but its fun. Its very big for what it is. Roughly the same footprint and an inch shorter then the SX with a tank. Giving up alot of features to save an inch.
The entire base I can get off, its the airflow ring thats stuck.. hard to explain in my state of mind... hmm okay lets just say I can not take the Base apart... lol
Im thinking with just the base, ima stick a screwdriver in one of the holes, then use some pliers to turn the very bottom of the base..
Still searching for my First Kayfun Lite lol I know I lost a bunch of tanks, batts, mechs, etc when I moved but that tank never left this house... Its driving me crazy because its around here somewhere!!!! 
Still searching for my First Kayfun Lite lol I know I lost a bunch of tanks, batts, mechs, etc when I moved but that tank never left this house... Its driving me crazy because its around here somewhere!!!!
Moving is SO much fun. After you arrive, it's a freaking treasure hunt just to find your stuff! ANY stuff!
We bought this house 4 yrs ago and there are still things we haven't located. Andria
In the chalice, did you realign the inner air hole to where the coil is positioned? You can tap out the inner chamber to reposition it.
The velocity with BF pin is a bottom feeder, but not a squonker, it doesn't drain because the pin comes up about 5mm from the deck. Good for not having to drip, but can be prone to leaking as you will have juice in the well. A bf mod doesn't sing until you have an RDA that is truly designed for it, one where you could squonk after each hit if you wanted to and the excess juice would just drain away.
Can the extra pin part be removed??
Looking at a Derringer from Reo mods. I like the Derringer so maybe so?? I was surprised to see Reo sells clones. The way the fan boi go on I would not have expected that.
Think I'm gonna get a Reo Grand LP with RM8.
I moved to VA for a few months, lost a good bit moving up, moving back down lost even more.. But since im back in the same house as its my familys, there was a lot of vape gear I left behind that I didn't get a chance to grab the first time.. Come back and everything I left was still in the dresser but that one Kayfun Lite.. idk lolMoving is SO much fun. After you arrive, it's a freaking treasure hunt just to find your stuff! ANY stuff!
Andria
I think I've found my sweet spot in the Velocity.
Triple parallel 30awg/0.25mm, 2.4mm ID, 9Wrap (27 total per coil), comes out to 0.8 ohms per coil.
View attachment 501178
Used 28awg and it was too slow to heat up at my preferred 75mW/mm^2. That's 30W.
Now I can take a nice long drag with warm vapor and lots-o-da-clouds...
So whats the Joules on it?
(had to ask after that "holding back rant" the other day lol)
Thats just it, I like sqounking with the velocity because it does have a deep juice well and I dont have to squonk the bottle every hit.
The extra bf pin stem can probably be cut off, I haven't tried yet.
The RM8 is great, if you like the derringer, drains really well. The fact that almost all of the RM's are clones is kind of the "oh yeah, shh" part of reo world. Rob himself has never been too worried about someone cloning the REO, he knew it would happen someday.
The cREO is good, the authentic is just better. Whether it's $150 better is a personal decision. I don't regret getting mine, and I'm looking forward to the new mod he's coming out with.
Well I'm not that big of a fan of the velocity to begin with. Too much air, and I prefer single coils. That and the leaking from no draining, puts the velocity out of my normal rotation.
All of themSo whats the Joules on it?
- Status
Similar threads
- Locked
