The Womper Woom, Womp it again Sam.

[chopdoc]

Hey, guys, good morning! I'm temporarily on Rich's computer again, which I hate because of the keyboard, and the mouse is spastic! I guess it's something you have to get used to... but since Rich is getting me a new monitor today, thankfully I don't have to.

I got a lot of stuff done yesterday, though, so that was good. I built a couple of my new tanks, and one is great, but the other one not so much. I put a coil in the Wine tank that came out to .49 ohms and it's working great. The air flow is a bit restricted for my likes, but it's not horrible. I actually LIKE it a lot. I got two of those, so that's good. Then I tried to put coils in the Goblin mini, but I think they're too big. They came out to .6 ohms on the reader thingie, but when I put the tank back together, it was reading .2 on the mod, so I think one of the coils was maybe too close to the chimney. It didn't LOOK like it was touching, but it must have been somewhere... I guess I need smaller coils for that. Any suggestions?

Oh, and by the way, you guys totally cracked me up on the biker thing. I have this picture in my head now of me on the back of someone's bike (in my underwear, OMG), with Helen trying to squish her fat self on behind ME. She'd do it, if she could, I'm sure! She's very adventurous. Even if she couldn't get ON the bike, she'd prolly trundle along behind if I was trailing brownie vapor out behind me. That's the only flavor she likes, go figure...

 

[chopdoc]

Thanks for all the birthday wishes yall

 

[Sir Kadly]

 

[Rixsta]

The woom next door, pull up a pew Wompers.

 

[Rixsta]

Looks like my abalone panels for the Efusion are coming Monday, I was hoping they would be here today, aw well, might have to tidy up instead.

 

[MikeyConti]

Thanks for all the birthday wishes yall

Happy Birthday!!

 

[Lannie]

Happy Belated Birthday, Chopdoc! Sorry I missed it.

 

[Robert Cromwell]

Happy Belated Birthday, Chopdoc! Sorry I missed it.

gots new monitor yet?

 

[Lannie]

Yup, and I can even see the screen real good.

I never got around to doing smaller coils for the Goblin mini today, but I did make some juice. With the Boreas, I need MOAR JOOSE!

If there's a Goblin mini, does that mean there's a full sized Goblin? This little deck is so screwed. The grub screws won't stay screwed in, and I don't have a screwdriver small enough to fit them, so I can't get 'em in really tight like they should be. Just handling the thing to wick it makes the screws back off enough for the coil legs to fall out. And I never even TOUCHED the screws. I was about to throw it out the window yesterday, then Rich took it and fiddled around a bit, and got the legs back in and the screws tightened, but for how long, I have no idea. I have to take those coils out anyway, but is there any point in making smaller coils if they won't stay in? It was very frustrating, and soooo, soooo SMALL! I probably don't have the right tools, and that might be 100% of the problem. I need a smaller screwdriver, if such a thing is even made.

 

[Robert Cromwell]

Well don't ask Rich we men know nuthin about small tools

 

[Sir Kadly]

Yup, and I can even see the screen real good.

I never got around to doing smaller coils for the Goblin mini today, but I did make some juice. With the Boreas, I need MOAR JOOSE!

If there's a Goblin mini, does that mean there's a full sized Goblin? This little deck is so screwed. The grub screws won't stay screwed in, and I don't have a screwdriver small enough to fit them, so I can't get 'em in really tight like they should be. Just handling the thing to wick it makes the screws back off enough for the coil legs to fall out. And I never even TOUCHED the screws. I was about to throw it out the window yesterday, then Rich took it and fiddled around a bit, and got the legs back in and the screws tightened, but for how long, I have no idea. I have to take those coils out anyway, but is there any point in making smaller coils if they won't stay in? It was very frustrating, and soooo, soooo SMALL! I probably don't have the right tools, and that might be 100% of the problem. I need a smaller screwdriver, if such a thing is even made.

It's a tricky little beast. What gage wire are you using? As far as screwdrivers, I think mine came with one, but I've been using the one that came with my Coilmaster kit and it works.

 

[Debadoo]

Yup, and I can even see the screen real good.

yay!!

 

[Rixsta]

Yup, and I can even see the screen real good.

I never got around to doing smaller coils for the Goblin mini today, but I did make some juice. With the Boreas, I need MOAR JOOSE!

If there's a Goblin mini, does that mean there's a full sized Goblin? This little deck is so screwed. The grub screws won't stay screwed in, and I don't have a screwdriver small enough to fit them, so I can't get 'em in really tight like they should be. Just handling the thing to wick it makes the screws back off enough for the coil legs to fall out. And I never even TOUCHED the screws. I was about to throw it out the window yesterday, then Rich took it and fiddled around a bit, and got the legs back in and the screws tightened, but for how long, I have no idea. I have to take those coils out anyway, but is there any point in making smaller coils if they won't stay in? It was very frustrating, and soooo, soooo SMALL! I probably don't have the right tools, and that might be 100% of the problem. I need a smaller screwdriver, if such a thing is even made.

Welcome back, missed ya, happy new screen. You'll find if you build 2mm or 2.5mm coils in the Goblin it's not too bad at all. After building and the stupidly easy Boreas it's a bit of a culture shock though haha

 

[Lannie]

It's a tricky little beast. What gage wire are you using? As far as screwdrivers, I think mine came with one, but I've been using the one that came with my Coilmaster kit and it works.

Yeah... I got a clone, though. No spare parts, no little screwdriver (not that I need anymore in general, but a smaller one for this deck would be good). I got spare glass for it (them, I got two), and I figure I can source o-rings as long as I can measure the ones that are in there, but dang these little Phillips head screws are itty-bitty. The whole deck is itty bitty, though! LOL!

Rich got me a cool little set of tools with a big fat handle (so nice for my crippled thumb joints!) and a boatload of bits of all sizes, but they don't have a tiny Phillips in there. I think Rich has an eyeglass repair kit around here somewhere, and I bet THAT would have a small enough screwdriver in it! Duh! I'ma go axe him right now!

 

[Lannie]

Welcome back, missed ya, happy new screen. You'll find if you build 2mm or 2.5mm coils in the Goblin it's not too bad at all. After building and the stupidly easy Boreas it's a bit of a culture shock though haha

Yeah, the Boreas was EASY!

 

[Rixsta]

It's a tricky little beast. What gage wire are you using? As far as screwdrivers, I think mine came with one, but I've been using the one that came with my Coilmaster kit and it works.

Coil master kit is so handy !!!

I've just realised, I've not vaped on a pre made coil for over a month, who would of thought it, I was never one for building my own, how times change..

 

[Rixsta]

Yeah, the Boreas was EASY!

Unless an O ring breaks

 

[Lannie]

K, got the eyeglass repair kit box, and there's a hundred little "tools" in here. One of 'em should be small enough.

Unless an O ring breaks

Right, but building the coil was easy at least!

Which reminds me, I meant to say a couple posts back, I have one of those CoilMaster kits, and it did come with a screwdriver but it's too big for these screws. I got screwed on the screws because I got a clone, didn't I? That'll learn me...

 

[Rixsta]

@Lannie, does the Goblin mini need a screwdriver then and not an Hex ?

 

[Rixsta]

K, got the eyeglass repair kit box, and there's a hundred little "tools" in here. One of 'em should be small enough.



Right, but building the coil was easy at least!

Which reminds me, I meant to say a couple posts back, I have one of those CoilMaster kits, and it did come with a screwdriver but it's too big for these screws. I got screwed on the screws because I got a clone, didn't I? That'll learn me...

The hex screw from the Boreas should fit in those posts, not sure how many spare ones are in the box. I know the Supreme ones fit anyway, we'll I think they do, might be worth a try and see....