The Womper Woom, Womp it again Sam.

[Lessifer]

I found a drawback to rebuilding the stock iSub coils. The rubber insulators. One got torn (or it cracked from age, these things are 8 or 9 months old now and have been in constant use the whole time), and the "inside" coil leg was touching the outside barrel, so it was reading 0.00 ohms. Dead short. So Rich just ordered me half a dozen of the RBAs.

I really, REALLY hate to throw anything away, and this seems like such a simple little thing (the rubber insulator), but I have no clue how to go about searching for replacements. Does anyone know if such a thing might be available somewhere? Or would it only be available to Innokin to make the original coils with?

I'd contact one of the Innokin people, but I'm sure they wouldn't appreciate me trying to rebuild stock coils instead of buying new ones.

In the old days you could search for a thread from someone who rebuilt them and took the time to detail it, and usually someone would a link to replacement pieces, which were normally repurposed from other things. I'm not sure how much of that there is now, since most tanks offer a deck that is specifically rebuildable.

 

[Robert Cromwell]

Womping a TFV4 mini with hex coil at 60 watts on my Disguiser.

Need to work on my pose and movements so I can enter a Klowd comp?

Just the correct knee bend and .... stick out?

 

[Lessifer]

iirc, the insulator of an AGA-T2 could be used as a replacement grommet for a kanger T3 head.

 

[Lannie]

In the old days you could search for a thread from someone who rebuilt them and took the time to detail it, and usually someone would a link to replacement pieces, which were normally repurposed from other things. I'm not sure how much of that there is now, since most tanks offer a deck that is specifically rebuildable.

Yeah, I guess I'm always a little late to everything... Like getting replacement glass for these tanks. I just went to Fasttech looking for some, and they used to have a 15-pack of them for $10, and now they have NOTHING. ZERO replacement tanks for the iSub G. They have glass for the iSub S, but it's different dimensions, and I don't think it will work. I should have gotten that 15-pack several months ago, but I was going to "get it later." See what "getting it later" gets you? It gets you nothing.

@Rixsta will you check for me? You have both the G and the S tanks now, right? Can you see if the glass is interchangeable or not? I'm thinking not...

 

[Lessifer]

Womping a TFV4 mini with hex coil at 60 watts on my Disguiser.

Need to work on my pose and movements so I can enter a Klowd comp?

remember, crouch, then stand!

 

[Lannie]

iirc, the insulator of an AGA-T2 could be used as a replacement grommet for a kanger T3 head.

Was that intended for me? I don't know what an AGA-T2 is, but on the other hand, I don't have a Kanger T3, either.

 

[Lessifer]

Was that intended for me? I don't know what an AGA-T2 is, but on the other hand, I don't have a Kanger T3, either.

not really intended for you, that was just the last time I searched for replacement parts for a non rebuildable clearo. Laughing at myself.

 

[DPLongo22]

No, I don'n know... (who's Jimmy Valvano? and what did he say... (I'm such an Old Guy ))

You got 11 minutes?

 

[k2zs]

You got 11 minutes?

Wow!....

Just Wow!!!

Thanks DP

 

[DPLongo22]

Wow!....

Just Wow!!!

Thanks DP

Anytime, K. Words to live by for us vapers, these days of battle.

 

[Robert Cromwell]

Strange thing is I get pretty much the same amount of Klowdz with my build in a Subtank Mini using RBA at 12.5 watts as I do with the TFV4 mini with the factory hex coil at 60 watts....

Moar Watz?

 

[Atchafalaya]

You got 11 minutes?

Dave, YOU da Man. That was awesome.

 

[DPLongo22]

Dave, YOU da Man. That was awesome.

Thanks, Atch.

 

[Atchafalaya]

Anytime, K. Words to live by for us vapers, these days of battle.

You laugh, you think......, you cry......You cannot stop the battle and give up. Keep your dreams alive.

 

[TrollDragon]

Strange thing is I get pretty much the same amount of Klowdz with my build in a Subtank Mini using RBA at 12.5 watts as I do with the TFV4 mini with the factory hex coil at 60 watts....

Moar Watz?

80%+ VG?

 

[Robert Cromwell]

80%+ VG?

I do 50/50. Anything over 60 VG is heavy on my lungs. Start getting mucus and crap.

 

[TrollDragon]

I do 50/50. Anything over 60 VG is heavy on my lungs. Start getting mucus and crap.

The "Cloudz Bro" would shine on that coil with a thicker juice.

I like 50/50 as well, it wicks easily in everything.

 

[pufZeppelin]

Was that intended for me? I don't know what an AGA-T2 is, but on the other hand, I don't have a Kanger T3, either.

never took a iSub apart (don't own one)
and I'm guessin' these are to small, but have a look...

- Resistance Coil Insulator 10 Pack RUBBER OR SILICONE (CE Type Atty's, eg. Protank, Evod,T3 etc.)

 

[Robert Cromwell]

The "Cloudz Bro" would shine on that coil with a thicker juice.

I like 50/50 as well, it wicks easily in everything.

yeah but my STM makes moar vapor with thicker juice too. Tried it at 75 VG once and Klowdz fer daze bro.

Just seems like there is an inverse squared diminishing return of vapor on watts consumed.

 

[MikeyConti]

Yeah, I guess I'm always a little late to everything... Like getting replacement glass for these tanks. I just went to Fasttech looking for some, and they used to have a 15-pack of them for $10, and now they have NOTHING. ZERO replacement tanks for the iSub G. They have glass for the iSub S, but it's different dimensions, and I don't think it will work. I should have gotten that 15-pack several months ago, but I was going to "get it later." See what "getting it later" gets you? It gets you nothing.

@Rixsta will you check for me? You have both the G and the S tanks now, right? Can you see if the glass is interchangeable or not? I'm thinking not...

Welcome to my World!! Always a Day Late and a Dollar Short!