The Womper Woom, Womp it again Sam.

[USMCotaku]

goos?? ewwwwwww not vapin yur builds hehehe


well, was gonna tell ya the iSubG isn't what ya wanna learn to rebuild on, but looks like you're gonna get a serpent tank also, and that will be easy enough to rebuild when we get you there, and you can use the iSubG with store bought coils. Sounds like a good plan!


I hope you can get one soon hun!!

Foie gras vape?

Sent from my LGMS631 using Tapatalk

 

[Robert Cromwell]

The 4 will go a bit faster then the 3.5 you are used to, if you are stepping on the "dark side"

Sent from my LGMS631 using Tapatalk

Yep but not bad vaping at 14-16 watts.

 

[Eskie]

Dads and their daughters, mine is only 3 years old, I do have 4 Sons though, the eldest is 16. I'm glad she's doing well, tut, forgot you already have a Triade, silly me.

My daughter is my only one, and she just turned 21. But I still feel like I brought her home as a newborn just a week or so ago. Yours is only 3, just wait. Dads and daughters are very special.

 

[USMCotaku]

obviously I'm not a batt expert by any means.......but mooch has a couple on his chart that I have enough to get two of.... lg hb 2 and lg hb 6 but 30 amp and only 1500 mah just dont sound right, but maybe it does........ the more amps it pulls the less mah it would have????

Yes, in general, the higher the cdr, the lower the mah

Sent from my LGMS631 using Tapatalk

 

[USMCotaku]

That makes sense. Claptons are what you want it you want a warm vape that doesn't Hoover juice.

Clapton coils are one of my favorites, for sure.....but lately I have been playing with hammered wire builds....really like the boneyard coil

Sent from my LGMS631 using Tapatalk

 

[Boden]

Clapton coils are one of my favorites, for sure.....but lately I have been playing with hammered wire builds....really like the boneyard coil

Sent from my LGMS631 using Tapatalk

Had to look "boneyard coil" up. Looks like a hammered loose twist.

 

[Boden]

To the build cave!!!

Done

 

[coolerat]

My daughter is my only one, and she just turned 21. But I still feel like I brought her home as a newborn just a week or so ago. Yours is only 3, just wait. Dads and daughters are very special.

I just noticed your from NY.

I'm about half way between Utica and Syracuse.

 

[Eskie]

I just noticed your from NY.

I'm about half way between Utica and Syracuse.

I'm out on LI now near Stony Brook. Born and raised in NYC. My daughter is in school in Houston, which is where I was. Travel hint to all. Avoid Houston in the summer. Never under 95-100 degrees along with 80% humidity. One day the "real feel" temp was 117 degrees. Came back here to 80 degrees and feel like I need a sweater.

 

[Eskie]

To the build cave!!!

Done
View attachment 573973

So is that a loose twist you just literally whacked flat with a hammer?

 

[USMCotaku]

To the build cave!!!

Done
View attachment 573973

I'm getting some great flavor out of those...squeezed one into a TFV4 rba head...beast mode [emoji14]

Sent from my LGMS631 using Tapatalk

 

[Robert Cromwell]

But I don't want to have to get hammered to build a coil.

Managed to drill out a setscrew in a Serpent deck. Came with boogered threads in one post....
Like a dummy I forced it, stripped the socket head and had to drill it out.
Fine now, better than it was new.

 

[Boden]

So is that a loose twist you just literally whacked flat with a hammer?

Yes

 

[Rixsta]

@Boden, glad I didn't give up on the original Ijoy Tornado, it has a few flaws but I've learnt how to deal with them, the biggest thing to get right is the wicking, now thats sorted I prefer this to the Nano, most won't and that's understandable but for the way I vape it's a power house.
I have just ordered the T6 deck for it, so I'm going to hold off on your suggested build until that arrives on Tuesday, I have that day off so that is definitely a build day ha.
So, I'm going to build Quad, 27g SS316L 10 wrap coils (20 wire wraps), that will be a total of 80 wraps in one deck, stacked coils, 2 on each side, that should be an interesting build
Will have to take some pictures of that ! I wouldn't put Claptons in this kind of build, you would need 200w to power it...
I'm not sure if I can fit 4mm inner diameter ones in there though but I will certainly give it a go, I think 3.5mm will probably be better.

 

[Boden]

@Boden, glad I didn't give up on the original Ijoy Tornado, it has a few flaws but I've learnt how to deal with them, the biggest thing to get right is the wicking, now thats sorted I prefer this to the Nano, most won't and that's understandable but for the way I vape it's a power house.
I have just ordered the T6 deck for it, so I'm going to hold off on your suggested build until that arrives on Tuesday, I have that day off so that is definitely a build day ha.
So, I'm going to build Quad, 27g SS316L 10 wrap coils (20 wire wraps), that will be a total of 80 wraps in one deck, stacked coils, 2 on each side, that should be an interesting build
Will have to take some pictures of that ! I wouldn't put Claptons in this kind of build, you would need 200w to power it...
I'm not sure if I can fit 4mm inner diameter ones in there though but I will certainly give it a go, I think 3.5mm will probably be better.

If using stacked I'd make the top coils with one wrap more than the bottom coils. That'll help with balancing the cooling pattern and wicking as the top coils won't get the same juice feed rate as the bottom ones.

 

[Atchafalaya]

My daughter is my only one, and she just turned 21. But I still feel like I brought her home as a newborn just a week or so ago. Yours is only 3, just wait. Dads and daughters are very special.

My son turned 27 on the first. Still waiting for grandbabies.
Hope my new mod helps me get of the WTA. It should be here on the 15th.

 

[Rixsta]

If using stacked I'd make the top coils with one wrap more than the bottom coils. That'll help with balancing the cooling pattern and wicking as the top coils won't get the same juice feed rate as the bottom ones.

Ok

 

[Lannie]

Where did everybody go? Is there a lunch or something?

 

[Fuzzy Thunderbear]

To the build cave!!!
Done

That is a work of art, Boden. I don't know whether I'd use it or frame it and hang it in the living room. Simply gorgeous...

 

[coolerat]

Buying mods.

VapeNW is one of my favorite places and they are having a great sale.

I like the iStick 100TC and they have it for 24 bucks.

And some Pico's for the ole lady.

And..............................