The Womper Woom, Womp it again Sam.

[Debadoo]

Well they do, the dna 75 is 75Ws and the 60 is 60Ws, but the dna 75 doesn't have the Boost ability to go over 6V

had no idea about that til it was brought up here. Thanks for splainin

 

[Boden]

Well they do, the dna 75 is 75Ws and the 60 is 60Ws, but the DNA 75 doesn't have the Boost ability to go over 6V

Problem with boosting from 3.7V up past 6V is the battery life is gonna suck.

A 1.5 ohm coil at 6V is 24W. I doubt anyone but a curmudgeon would complain about needing more power than that on a 1.5ohm single coil.

 

[retired1]

I doubt anyone but a curmudgeon would complain about needing more power than that on a 1.5ohm single coil.

You rang?

 

[Robert Cromwell]

Problem with boosting from 3.7V up past 6V is the battery life is gonna suck.

A 1.5 ohm coil at 6V is 24W. I doubt anyone but a curmudgeon would complain about needing more power than that on a 1.5ohm single coil.

however a 1 ohm coil maxes out at 36 watts and a .6 ohm coil maxes out at 60 watts....
A .2 - .5 coil coil will give you 75 watts.

Edit some of my calcs are off a bit as the output voltage is actually 6.2 volts per the spec sheet.

 

[Robert Cromwell]

A DNA 60 will give you 60watts up to a bit over .1 ohms up to a bit over 1.5 ohms.

 

[Eskie]

A DNA 60 will give you 60watts up to a bit over .1 ohms up to a bit over 1.5 ohms.

True. But would really ever run a 1.5 ohm coil at 60W?

 

[Boden]

Now I'm curious. What would a 1.5 ohm coil build that would work at 60W look like. I must make this thing.

 

[Robert Cromwell]

About 13 wraps of 24 ga Kanthal on a 4mm bit or 3 mm radiator?
or a dual 28 ga Kanthal on a 3 mm radiator? Around 11 wraps.

 

[Boden]

Wait a moment. 60W from a 1.5 ohm coil requires 9.49V

 

[Debadoo]

You rang?

lmao! howdy lurch

 

[coolerat]

I'm a DNA fanboi but the DNA 75 strains my love.

In fact while I still love my 40's and 200 and will get a 60w the 75 is crap.

 

[Boden]

Instead of playin with coils I modded my limitless+. Dropped the top cap down 2.5mm to make the chamber smaller. Cut the outer sleeve(?) down and modded the top cap. Made a big difference flavor wise.

 

[Boden]

 

[Robert Cromwell]

Wait a moment. 60W from a 1.5 ohm coil requires 9.49V

Just punched numbers into an ohms law calculator online.
Darned programmers.

 

[TrollDragon]

I'm a DNA fanboi but the DNA 75 strains my love.

In fact while I still love my 40's and 200 and will get a 60w the 75 is crap.

All depends on what you want to vape on it...

I'ma like this setup right here...

 

[Debadoo]

I'ma like this setup right here...

and what is that set up right there? I need captions

 

[DavidOck]

Instead of playin with coils I modded my limitless+. Dropped the top cap down 2.5mm to make the chamber smaller. Cut the outer sleeve(?) down and modded the top cap.

Does that make it a Limitless Minus?

(And it DOES make you a tobacco manufacturer! )

 

[TrollDragon]

and what is that set up right there? I need captions

Sturdy with a good bit of heft, it could sub for the frying pan if need be.

The Hcigar VT75 and a Shenray Genelocity Giant. A pair of SS316L Notch Coils wicked with Rayon and the 12ml tank filled with a local makers Crunch Munch joose (90%+ VG).

A cloudy and quite tasty vape, since it's only running at 65W/480F it's on the cool side.

 

[Rixsta]

My new Star Wars DNA 250 has arrived, NO custom charges !

That's not what shocked me, this box mod is HUGE LOL, which is to be expected as it's the most tricked out DNA250 on the planet..

This won't be leaving the house, unless it's in the car.

What an awesome job Wayne did, post some pics soon, I'll put it next to a pico just for laughs.

It's a beast but a beautiful one, nothing I own comes close to this, nothing....

 

[Boden]

@Rixsta

How big can it be..