The Womper Woom, Womp it again Sam.

[TrollDragon]

OK it's here!

First impressions is it's built very well. Now I've never owned any of the Aromizers so I can't say if this is improvement or a failure. I do like the fact that you can use it 4 different ways.
I do have one concern though and that's the build deck. Not because it's post-less but because it's tiny.
Sorry TD but I don't think that your Triple Core Aliens are going to fit in here.
I don't know if the velocity build deck from other Aromizers will fit this or not.

Anyway here's some pics for now. I need to see what type of build is going to fit and work on this. In the mean time enjoy the vape porn.

The kit consists of 3 boxes

The build Deck

In rda Mode

In 5ml mode

In 10ml mode

And in all it's glory 20ml mode

Well that's distressing...
Steam Crave claims it has "a spacious postless deck for coils over 6mm ID", I might just have to increase the ID of the coils.

The regular Supreme's postless deck has to have the coils mounted hanging over the edge of the deck, just above the juice channels (Stupid Design). They were suppose to fix the Plus's deck by rotating it 90° so you can now mount the coils inline with the grub screws and wick straight out and down to the juice channel.

Looks like they solved they annoying whistle by putting a plate full of holes in the airflow.

Can't wait for mine to arrive, for now I will live vicariously through your pictures.

Build'er up with sumpin' good!!

 

[LJFinFLA]

A couple of quick measurements. Base is approx 19mm wide. From the center of the neg hole to the center of the positive hole is approx 5mm. I will try to build something for this and I'll let you know how big it can go.

 

[Eskie]

OK it's here!

First impressions is it's built very well. Now I've never owned any of the Aromizers so I can't say if this is improvement or a failure. I do like the fact that you can use it 4 different ways.
I do have one concern though and that's the build deck. Not because it's post-less but because it's tiny.
Sorry TD but I don't think that your Triple Core Aliens are going to fit in here.
I don't know if the velocity build deck from other Aromizers will fit this or not.

Anyway here's some pics for now. I need to see what type of build is going to fit and work on this. In the mean time enjoy the vape porn.

The kit consists of 3 boxes

The build Deck

In RDA Mode

In 5ml mode

In 10ml mode

And in all it's glory 20ml mode

I was about to say the 20 ml build looked so much taller to the 10 ml build, but noticed the 5 and 10 ml photos were the same.

I'll return to watching now.

 

[LJFinFLA]

I was about to say the 20 ml build looked so much taller to the 10 ml build, but noticed the 5 and 10 ml photos were the same.

I'll return to watching now.

Correct you are Eskie. I goofed.
Those photos are both of 5ml size. here is the 10ml size.

 

[TrollDragon]

A couple of quick measurements. Base is approx 19mm wide. From the center of the neg hole to the center of the positive hole is approx 5mm. I will try to build something for this and I'll let you know how big it can go.

Thanks!
I'll compare those measurements to the regular Supreme's postless deck and the BFDFT's after supper.

 

[LJFinFLA]

Thanks!
I'll compare those measurements to the regular Supreme's postless deck and the BFDFT's after supper.

I measured the Boreas and that was around 9mm hole to hole and the Crius Plus was about 10mm.

 

[pufZeppelin]

I can't help myself, I'm OCD that way...

 

[LJFinFLA]

OK so I threw a quick build in the Aromizer. I put a SS316L 26ga wrapped with 36ga so it's not wide. I wanted to see how big a dual coil I could fit. I was able to put a dual 10 wrap with a 4mm ID.

 

[LJFinFLA]

I can't help myself, I'm OCD that way...

View attachment 626515

Thanks Puff!!

 

[TrollDragon]

OK so I threw a quick build in the Aromizer. I put a SS316L 26ga wrapped with 36ga so it's not wide. I wanted to see how big a dual coil I could fit. I was able to put a dual 10 wrap with a 4mm ID.

Nice!
I love a coil that you can pull the full strand of Sally's through and just trim, that should be a great vape!

The deck surface on the BFDFT is 19mm in diameter with 8mm between the hole centers (Width and Depth) I think the Aliens might fit the Plus since I reduced them from 6 wraps to 5. At 6 wraps they were a little unwieldy with wicking.

 

[Shawn Hoefer]

Nice!
I love a coil that you can pull the full strand of Sally's through and just trim, that should be a great vape!

The deck surface on the BFDFT is 19mm in diameter with 8mm between the hole centers (Width and Depth) I think the Aliens might fit the Plus since I reduced them from 6 wraps to 5. At 6 wraps they were a little unwieldy with wicking.

Much bigger and you could pull Sally through... not just a strand...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[TrollDragon]

Much bigger and you could pull Sally through... not just a strand...

Sent from my SAMSUNG-SM-N910A using Tapatalk

Mustang Sally?

 

[LJFinFLA]

Yup it's vaping well. I have it on the Hohmwrecker in SS TC mode. It ohms @.22.

A couple of things I forgot to mention earlier. The drip tip is a press fit one and is a PIA to get out. I had to use needle nose pliers. Also some of the tanks parts are kind of sharp. I did slice my finger taking it all apart. Also I find the air flow ring a little loose. It does move very easily. I really like the Gun Metal finish.

If I find anything else I post it.

 

[Falco78]

If I didn't already have 2 Big Buddha tanks on hand I'd have to order one of these

sent from my Galaxy Note 4 using MOAR 2.1b ROM running tapatalk

 

[TrollDragon]

If I didn't already have 2 Big Buddha tanks on hand I'd have to order one of these

sent from my Galaxy Note 4 using MOAR 2.1b ROM running tapatalk

You mean the old EHPro Big Buddha?

I couldn't vape that today if it tried...

Have you modified yours?

 

[LJFinFLA]

What's up folks!!

@TrollDragon

Did your Supreme Plus come yet?
I'm really enjoying the heck out of mine. I haven't tried it in the 20ml mode yet.
Been using it in 10ml which is wicking and vaping really well!
I think your going to like it!

 

[LJFinFLA]

I've been using the Slice but I have to say it's not as good as the G2. I know that the chips are pretty much identical but even with the latest update it just doesn't perform as well. I don't know if it's just mine or if that's the norm. Battery life for some reason is not the best and I'm using the HohmTech 26650. Hoping another update will perk this chip up to FSK standards.

The Altus T1 tank is not a bad subtank at all. The top fill is great on it. You push down and twist open the top. Really nice and easy. As for the vape on it, it's pretty good. There is a learning curve where you basically have to preheat it before you vape. I've been using it as per the Guo website. Only vaping it between 50 & 60 watts. The chip has an ohm of .4. I tried it in Tungsten TC in both the G2 and Both of my DNA's (VT75 & VT133) but have not had any luck getting it to TC. So mainly using it in power mode. Decent vapor production and nice flavor.

 

[LJFinFLA]

Just watched a new Grimm Green video on the Altus T1.

 

[TrollDragon]

What's up folks!!

@TrollDragon

Did your Supreme Plus come yet?
I'm really enjoying the heck out of mine. I haven't tried it in the 20ml mode yet.
Been using it in 10ml which is wicking and vaping really well!
I think your going to like it!

As a matter of fact I picked it up today and it's quite the pile of stuff you get. My deck doesn't have any of the stripped hole problems that some have, I read that Steam Crave has excellent CS and they are looking after the problem for those that do.

I went straight for the 20ml tank, all mounted up with a pair of 26g fused Claptons (6 wraps on 4mm). It's down in the shop now waiting for wicking and filling (Had to break for supper and watch Corrie ), the Aliens stayed on the BFDFT's deck, it would have been a tight fit on the Plus.

Cloudy Collaborations sent me out a brand spanking new replacement BFDFT (full kit), no charge. This one works so much better than the one from KP, that one was probably made on a Friday afternoon out of an end piece of stock...

I am really enjoying the Recoil RDA <- on the iPV8 and my Supreme LE is working very nicely under TC on the Minikin2.

I'll see if I can get some pictures to post of the Plus on the LUX.

 

[LJFinFLA]

As a matter of fact I picked it up today and it's quite the pile of stuff you get. My deck doesn't have any of the stripped hole problems that some have, I read that Steam Crave has excellent CS and they are looking after the problem for those that do.

I went straight for the 20ml tank, all mounted up with a pair of 26g fused Claptons (6 wraps on 4mm). It's down in the shop now waiting for wicking and filling (Had to break for supper and watch Corrie ), the Aliens stayed on the BFDFT's deck, it would have been a tight fit on the Plus.

Cloudy Collaborations sent me out a brand spanking new replacement BFDFT (full kit), no charge. This one works so much better than the one from KP, that one was probably made on a Friday afternoon out of an end piece of stock...

I am really enjoying the Recoil RDA <- on the iPV8 and my Supreme LE is working very nicely under TC on the Minikin2.

I'll see if I can get some pictures to post of the Plus on the LUX.

Now that's what I call customer service!
I love when a company stands by their product and doesn't make you jump through hoops.
They just say your not satisfied? Here ya go a new atty from us no questions asked!!!