The Womper Woom, Womp it again Sam.

Status
Not open for further replies.

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
I have a million bottles laying about. Personal preferance is strong with these.

I hope they aren't 6.5 ML as thats not much time on a Goon. Drone has 11ml and thats just right.

The Wraith has, by far, the best bottle set up. I don't care for the stock ones so I use 10ml bottles from FT. The take and cap and feed into the mod like a magazine in a Glock. Very easy and neat to carry a spare.

On my Boxer clone I use bottles from a LV Halcyon. They are very good. Currently I am using some of the YDTK super softs and to me they are to soft.

Drone, Halcyon, Rio and YDTK are a friggin mess to refill. I do not refill this style away from a large number of paper towels and sink. Wraith bottle are super easy and mess free to refill.

From looking I'd say the Rebel uses the messy style.

Titaium Good is GORGOURES!!!!! Its a clone. Its so light it feels like plastic. Later I'll put my standard mech build (5 spaced wraps of 24ga X2) and run it on a Boxer. If it doesn't get to hot I can see more of these puppies following me home.
Agreed that the YFTK Silicone's are way too soft. The SMJY's are very popular and are compared in quality to the Lukkos Silk's & Cappy V4's which are both $25 to $30 each.
The new SMJY's
$6.41 SJMY Super Soft Bottom Feeder Bottle for BF Squonk Mod - 6ml / silicone at FastTech - Worldwide Free Shipping

YFTK now has square ones also.
$5.73 YFTK Replacement Bottom Feeder Bottle for BF Squonk Mod - 8.5ml / silicone + 316 stainless steel at FastTech - Worldwide Free Shipping

The squonker I always have a mess filling is the Inbox, need a piece of paper towel around for that tube. No mess at all filling the Drone, DB2 or Wraith.

You should check out a MM Refill Kit.
US Retailer - MM Squonker Refill System - Innovapes LLC.

 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
UK time difference means I'm in the land of nod when ya'll are on here :)

Seems this Squonking burns the wallet even more than before. Ruh Roh..

Squonk is out for delivery and will be here before 1pm today.

I tried my friends Kennedy 24 2 post rda and loved it, I have to say it has the edge over the Goon for flavor and just vapes better. Now I want an authentic myself Ruh Roh..

Pics later, unfortunately, I have a busy morning at work :(
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK










First impressions...

Well made, very light and nice to hold, buttons have very little travel, slight click but nothing that's going to annoy you.

Battery door clicks on fine, it's press fit, no magnets but they aren't needed..

Fool proof squonk, especially with the Trinity cap, the glass def improves the flavor and being my first time squonking, it's nice to be able to see what's going on.....kind of noob proof :)

Cons so far...

The bottle, I didn't measure how much juice went in, I was too eager to try it but I would say 6ml, the bottle is too soft I would say but then what do I know, there is plenty of room for a bigger bottle which I will be investing in.

After an hours use....

I love the vape from it, it's awesome, really enjoying squonking and not having to worry about wicking or leaks or all the stuff that comes with an RTA, flavor is on point, what's not to like.

Is it worth the price tag hmmm, subjective but it sure is nice to have something this lightweight and well made.

I had no trouble filling it, very easy and absolutely no mess at all, no leaking from the tube or anything, taking off the RDA the 510 is bone dry.

I will be putting a Kennedy 24 2 post RDA on it though, I prefer that over the Goon, that's personal taste but in my opinion it just vapes better........each to their own.
 

Eddie91

New Member
Aug 10, 2017
3
5
30
  • Deleted by retired1
  • Reason: Spamming for post count

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
Mine is in NYC so should be Upstate early next week??

You say a bigger bottle will fit?? I'll try a Drone bottle. It should be bob on.
You can see from the pic how much height is left, a taller one is needed :)

Took the glass off now.....got straight into squonking like it's second nature..

 

Eddie91

New Member
Aug 10, 2017
3
5
30
:confused:

Yes what ?

Oh your trying to get your post count up, there's much better ways to do that you know ;)

I just need to catch vapesourcing.com rep attention and talk with him, but this looks a nice community with lots of info, might stay longer than intended ^^
 

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
Here's a stupid question. Those plastic bottles must take on some residual flavor when changing juices, just as Unicom bottles can. So you just buy a ton of them, one for each juice, or is there some trick to plastic cleaning I don't know?

Nice looking squonker, congrats! I'll admit I like the trinity cap more.
 

Rathamar

Super Member
ECF Veteran
Verified Member
Sep 15, 2013
719
1,866
Mound - Minnesota, USA
Agreed that the YFTK Silicone's are way too soft. The SMJY's are very popular and are compared in quality to the Lukkos Silk's & Cappy V4's which are both $25 to $30 each.
The new SMJY's
$6.41 SJMY Super Soft Bottom Feeder Bottle for BF Squonk Mod - 6ml / silicone at FastTech - Worldwide Free Shipping

YFTK now has square ones also.
$5.73 YFTK Replacement Bottom Feeder Bottle for BF Squonk Mod - 8.5ml / silicone + 316 stainless steel at FastTech - Worldwide Free Shipping

The squonker I always have a mess filling is the Inbox, need a piece of paper towel around for that tube. No mess at all filling the Drone, DB2 or Wraith.

You should check out a MM Refill Kit.
US Retailer - MM Squonker Refill System - Innovapes LLC.



Thanks for the input on the SMJY bottles, I have a couple on the way to try out and if they are as good as that, I will be stocking up on them.

I agree the YFTK Silicone's are way too soft. They squonk great, but filling....... better have some paper towels near by.
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
Here's a stupid question. Those plastic bottles must take on some residual flavor when changing juices, just as Unicom bottles can. So you just buy a ton of them, one for each juice, or is there some trick to plastic cleaning I don't know?

Nice looking squonker, congrats! I'll admit I like the trinity cap more.
Yeah glass is back on, just playing about with it atm. As for bottles, I've not even thought about it lol.. I'm a squonk noob ;)
 

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
Trinity Comp glass for the Kennedy 24 ordered, at least I found this for sale in the UK so no crazy customs charges ha..

Been vaping on my friends Kennedy today again and I love this RDA, I really don't care much for the Goon after trying the Kennedy, for me, it's way better..
 

Rixsta

The Millionaire Vapor' The Enabler
ECF Veteran
Verified Member
Apr 8, 2015
6,590
39,924
49
Somerset, UK
It's way to airy for me as a low wattage caper at only 55w but I can see why you would like it.

Can't wait until next week for my Rebel.
Yeah that makes sense with the fixed airflow and that's why I love it as I vape at around 95w.

The Goon can't really handle my builds and the side airflow messes up my mod overtime with the crazy juice sizzling on them coils haha.

So yeah it's better for me but I can also see why you would love the Goon at lower wattage.

I've changed my mind about the squonk bottle being too soft on the Rebel after trying my friends super soft bottle, now that WAS to soft.

Im yet to actually measure how much it fits from a syringe, my buddy said 8ml but it looks too small to me, I dunno but I will measure it out in half an hour and let you know.
 
Status
Not open for further replies.

Users who are viewing this thread