The Womper Woom, Womp it again Sam.
- Thread starter Lessifer
- Start date
- th_trl_thread_readers 0
- Status
OK, off I go to work on The Beast again. Everybody wish me luck! 
I'll be back with my report in a bit.
I'll be back with my report in a bit.
It is really nice and it does vape as good as it looks.
Good luck, it can be a naughty beastOK, off I go to work on The Beast again. Everybody wish me luck!
I'll be back with my report in a bit.
But on the plus side, you do have a sexy voice.Awful
Awe thanks Lannie!!! I haven't flown in 18 years.Always better to be safe than sorry!from me, too. Safe travels!
Awe!!! All you guys really made my day. It's been a rough few weeks and this all make me feel so warm and fuzzy. I'm going to sneak out for a vape now!!!! Yea man!!
You just gave me a great idea.Now who's flirting? And now who has to pay for that DNA75?
What's good enough for the goose is good enough for the gander. My grandma always used to say that.Now who's flirting? And now who has to pay for that DNA75?
And here's another hotty
Do any of you guys know if it would be ok to carry my vape stuff in my purse? Or would it be better in the carry-on? I'm not checking any luggage.
Last time I flew I put my e-liquid in the quart size glad bag with my other liquids. I had my mods and atty's in my carry on. If you have an atty with juice in it make sure it's upside down when your flying so it won't leak from the pressure.
Oh I didn't take my purse with me!
Ok thanks! I think I'm ready. I don't need any filled tanks since the total trip is about 4 hours (with layover). I chew nic gum at work so I'm used to going without. lol
Naughty beast is RIGHT! I thought I almost had it. For about 10 minutes, I could see what COULD be. It's like the difference between burlap and velvet. And then it peed on me again. HOT juice between my fingers - OW!
It was sooooo smooth, but it started to "gurgle," so I went to up the wattage (I had it at 50W) and it poured out all over my hand.Here's what I did. I made two 3mm 10-wrap 26g Kanthal coils (came out to .65 ohms if that matters), wicked with the same insane amount of wicking I used yesterday, except it might have been a little less tight in the coils. It was tight, but I think maybe I could have jammed a little more in there, maybe that's the problem... Then I dripped some juice on the coils, and on the wick just outside the coils, and put it on a mod and hit the button (had it at 45 watts for that). Then I watched a shower of "fireworks" of hot juice spatter off it. That was cool.
Then I put a little juice on the wick tails (the LONG wick tails) so I could tuck them in better, and I did that, taking special care to use the point of my tweezers to push the wick over where the holes are (and I AM using the smaller deck now). I dripped a few more drops of juice on it all then, but not a lot (not like I did yesterday), just enough so that it was moistened, then I fired it again a couple of times just to watch the fireworks. Because I've never done that before, and I thought it was neat. When it cooled off a little and I could get it back off the mod, I put it in the tank, and tried to bottom fill with a syringe, but I'd closed the airflow, so the juice wouldn't go in.
(Insert laughter here!) So I dabbed the excess out of it, put the bottom cap on and turned it over. Took the top cap off and filled it from the top. Not "filled," it was about 1/3 full because I didn't want to waste good juice if it hurled on me again. Anyway... I put the top cap back on, turned it upside down and let it sit for a minute or so, then I turned it back right-side-up and opened the airflow to two whole holes (I love that, "whole holes!" LOL!). Then I watched it. And watched it. Nothing came out the holes. So far, so good.So then I put it on one of the 60W mods and set it to 50W. Still good... took a hit, and went straight to heaven.
Like I said, burlap and velvet. Mmmmmmm... After each hit, I peered at those little holes to see if any juice was comin' out. Hit, peer, hit, peer, hit, peer... for about 8 to 10 minutes. It was PERFECT. So I came downstairs to tell Rich I'd succeeded and was about to log in here to tell you guys I'd gotten it right finally, and it started to gurgle a little bit. Uh-oh. So I sucked hard to clear it, and got exactly one clean hit off it then before it spewed.I'm sorry for all the mind-numbing detail above, but I really want to get this figured out, and I still don't know what I'm doing wrong. It could definitely take more wattage, that's for sure. The 50W was good, very smooth and luxurious, but it was almost a bit on the cool side, vaporly speaking. GREAT flavor, though! I have also noticed that both times this happened, the base of the tank was hot, so maybe I have to wait a certain amount of time for it to cool off between vapes? Is my juice thinning to much? (I'm using approx. 80VG with my DIY juice.) Or only do 2 or 3 hits and then put it away for a while until it's cool? That actually makes no sense to me, but I don't know.
Maybe Rixy was right, this is too much sports car for this ol' lady. But I WANT TO MASTER IT! I just don't know what to do next. More wattage? Different coils?
The wire I have right now is 24g and 26g in both Kanthal and stainless. Would a twisted something-or-other work better do you think? Prolly Rich (or me, even) could twist some wire.Right now, I'm gonna clean this thing out again, and put it away, and go build one of the other new tanks I got yesterday. Got some of those Nebula Wine tanks and some Goblin minis, and maybe one of those will work better. I'm starting to lose confidence in myself right now.
Meanwhile, I'd appreciate another critique if anyone would care to do that for me. Pweeze?Awe thanks Lannie!!! I haven't flown in 18 years.
It's probably been at least that long for me. I sure miss it!
Here here, and not just with one guy but two !Now who's flirting? And now who has to pay for that DNA75?
- Status
Similar threads
