The Womper Woom, Womp it again Sam.
- Thread starter Lessifer
- Start date
- th_trl_thread_readers 0
- Status
Just woke to check.We are leaving the EU
Now we can have out own rules and have our Country back and close the gates on immigration, we are already full.
This is amazing news, I wonder how this will affect vaping laws, hmm, maybe there is hope for us, although the British pound has crashed but that was to be expected.
Your president said if we left, we would be at the back of the cue for any future help lol, ain't nobody wanting his help...
Free !!
Back to bed now
Put some SS316l 26g/32g Flat Claptons or Flaptons in the Boreas, 0.15ohm, 90w, got a massive nic overdose on 3mg, geez, there's no doubt the Boreas was built for these kind of builds, made my nose run on the peach menthol juice, def couldn't vape this all day with this setup. Even for me, this is just tooooooooo much beast, it's not even a very warm vape, might have to turn her up..
Oh what the hell..
110w warmer but not unpleasant
133w maxed out on the Efusion duo, warm and so much vapor even Emma complained, no dry hits.
What a tank this is, there is no way the Supreme could handle this, I did use Cotton bacon though as it def wicks better.
Fun over haha, better get back to some normal vaping
Oh what the hell..
110w warmer but not unpleasant
133w maxed out on the Efusion duo, warm and so much vapor even Emma complained, no dry hits.
What a tank this is, there is no way the Supreme could handle this, I did use Cotton bacon though as it def wicks better.
Fun over haha, better get back to some normal vaping
Exactly buddy, there is a lot to celebrate but only time will tell, everything in the UK is very uncertain atm, there's a weird atmosphere around here today but I'm so pleased with the result !!Now yall dont fall under all the EU vaping regulations!!! That alone is sumptin to celebrate
I have a new mod to show you and I think it's the best value mod to hit the market in a while....
I can't comment on it too much as I only got it an hour ago, just upgraded the firmware, there was a terrible firing delay which thankfully has now gone. Its a lovely matt black finish and oh....that firing button, it really is good !
@Lannie, this maybe the dual mod your looking for, Boreas fits on it, no overhang, great price ! TC seems to work well too..
Exactly buddy, there is a lot to celebrate but only time will tell, everything in the UK is very uncertain atm, there's a weird atmosphere around here today but I'm so pleased with the result !!
I have a new mod to show you and I think it's the best value mod to hit the market in a while....
I can't comment on it too much as I only got it an hour ago, just upgraded the firmware, there was a terrible firing delay which thankfully has now gone. Its a lovely matt black finish and oh....that firing button, it really is good !
@Lannie, this maybe the dual mod your looking for, Boreas fits on it, no overhang, great price ! TC seems to work well too..
That looks really nice! Is that whole red wedge the fire button? And what is i t?
Nice analogy.Kinda like a snot nosed kid. Leaky.
For real, the grub screws are made from crap metal, the top fill is useless, flavor is pretty good.
Very nice! They just keep getting better and better don't they?Exactly buddy, there is a lot to celebrate but only time will tell, everything in the UK is very uncertain atm, there's a weird atmosphere around here today but I'm so pleased with the result !!
I have a new mod to show you and I think it's the best value mod to hit the market in a while....
I can't comment on it too much as I only got it an hour ago, just upgraded the firmware, there was a terrible firing delay which thankfully has now gone. Its a lovely matt black finish and oh....that firing button, it really is good !
@Lannie, this maybe the dual mod your looking for, Boreas fits on it, no overhang, great price ! TC seems to work well too..
I gotta admit this is my favI got bored lol
Top knurling is actually nice and easier to grip...
Yes you squeeze n vape, the top pushes in, not the bottom, the bottom is hinged, unlike the wobbly x cube. It's comfortable and going back to pressing a button kinda sucks. It's the new Smok H Priv !
Cost a lot more too lol. Nice to see you Atcha xx
What a coincidence. It's also my favorite drink.
Ironic and pitifulWow........irony?? What's that. Colonists left England cuz we didn't have a say in nuttin..... now we get crappy vape laws shoved down our throat with no say so.......
CONGRATULATIONS!!!!!!!!!!!!! Wooo hoooo!We are leaving the EU
Now we can have out own rules and have our Country back and close the gates on immigration, we are already full.
This is amazing news, I wonder how this will affect vaping laws, hmm, maybe there is hope for us, although the British pound has crashed but that was to be expected.
Your president said if we left, we would be at the back of the cue for any future help lol, ain't nobody wanting his help...
Free !!
That's from Smok? Really pretty. Does that use Bluetooth as well? I've read a few threads about firmware upgrade adventures gone awry that way. Then again, I'm the type who hasn't even bothered to update my Pico firmware so it's not like a vital feature for me. But a dual 18650 would be nice to have.
I'm still just halfway down on my battery charge on the Triade. Looks like it will need to be recharged only every week or so.
Yah, high-wattage vaping v. single-battery mods is kinda no bueno for me. I'm at 9W with PT2s up to about 50W. I only have the RX200S and an older iStick 50 as multi-battery mods. And even though it's designed to run upwards of 75W, I just don't take a single battery mod up that high. Mebbe this weekend, I'll clean out and refire the Griff25 and see how hot I can take it.
No BluetoothThat's from Smok? Really pretty. Does that use Bluetooth as well? I've read a few threads about firmware upgrade adventures gone awry that way. Then again, I'm the type who hasn't even bothered to update my Pico firmware so it's not like a vital feature for me. But a dual 18650 would be nice to have.
I'm still just halfway down on my battery charge on the Triade. Looks like it will need to be recharged only every week or so.
Better get rid of that "s" on the end, @Debadoo might could git ornery if people keep messing up the y'awls, I mean ya'lls, I mean y'allses, err, whatever.
One of my Southern friends says the proper term is "all y'alls" when you mean more than one person. It must be a regional thing. But since she's NOT on this forum, I'ma go back to "all y'all" because that sounds better.
Oh, great! I don't remember what you came up with! LOL! I guess I'll just be Lannie.
The legs were through the holes just fine. I could see them sticking out slightly on the other side, so I know they were all the way through. I think these screws are just screwed.
I have a new mod to show you and I think it's the best value mod to hit the market in a while....
I can't comment on it too much as I only got it an hour ago, just upgraded the firmware, there was a terrible firing delay which thankfully has now gone. Its a lovely matt black finish and oh....that firing button, it really is good !
@Lannie, this maybe the dual mod your looking for, Boreas fits on it, no overhang, great price ! TC seems to work well too..
NICE! I like the looks of that, however, with that whole edge (wedge) being the fire button, what happens when I pick it up to carry it around with me? Am I going to be accidentally firing it? Is there a convenient lock button? Even if there is, I don't know how much I'd like having to lock and unlock it constantly. How sensitive is it to accidental firing, say, if you pick it up with one hand, and then grab the handle of your tea cup with the same hand? When I come down the stairs to use the computer, I have to bring my mod and my coffee cup in the same hand, because I need one free hand to hold the handrail (new rule after I fell down the stairs last year). Either that or I have to put the mod in my pocket. I'm just worried about that wedge getting pressed when I don't want it to be, so let me know what you think about that, K?
And CONGRATULATIONS on the "leave" thing!
Here are a couple pictures of the old coils in the new Goblin mini deck, by the way. I took more, but Rich only sent these to my e-mail, so maybe the others didn't turn out right...
This one was after I tightened the screws again, and the resistance had started to drop. The first reading was .39, then it went to .32, and continued on down from there every time I read it after that. (It did the same thing, though, on the other deck, when I'd freshly installed these coils as new, so the fact that they were "used" coils didn't cause the drop.)
And one with the flash, which shows my pretty coils off a little better.
By the way, this is as close-up as our camera will do and still keep focus. I tried to get closer, and it just blurred out every time.
This one was after I tightened the screws again, and the resistance had started to drop. The first reading was .39, then it went to .32, and continued on down from there every time I read it after that. (It did the same thing, though, on the other deck, when I'd freshly installed these coils as new, so the fact that they were "used" coils didn't cause the drop.)
And one with the flash, which shows my pretty coils off a little better.
By the way, this is as close-up as our camera will do and still keep focus. I tried to get closer, and it just blurred out every time.
Lannie, that's beautiful work.Here are a couple pictures of the old coils in the new Goblin mini deck, by the way. I took more, but Rich only sent these to my e-mail, so maybe the others didn't turn out right...
This one was after I tightened the screws again, and the resistance had started to drop. The first reading was .39, then it went to .32, and continued on down from there every time I read it after that. (It did the same thing, though, on the other deck, when I'd freshly installed these coils as new, so the fact that they were "used" coils didn't cause the drop.)
View attachment 570085
And one with the flash, which shows my pretty coils off a little better.
View attachment 570087
By the way, this is as close-up as our camera will do and still keep focus. I tried to get closer, and it just blurred out every time.
Aaaand...I just saw a picture posted of a Merlin on a RX75. So it will fit after all. RX75 may have just moved higher on my "want it even though I don't need it" list.
- Status
Similar threads
