The Womper Woom, Womp it again Sam.

[Rixsta]

The Kylin has such a big o-ring at the bottom, the top cap wasn't necessary, but people were spooked by the tank popping off of the Ammit Dual, so... too cap. I have the version without, and the Ammit Dual with.

I have the Captain, and thus far, it's working fine... no frying or exploding. In fact, it might move into the top 5.

I've been watching Asvape for a while. The Lucifer looks amazing, and the Michael looks very good, but I am disappointed that their only offering the one piece of art...

Sent from my SAMSUNG-SM-N910A using Tapatalk

Agreed, the original Kylin without the top cap was great, you could pour your juice in, never had the glass pop off, although it had the leaky deck. I guess you could use the new deck on the old tank, that would be awesome.

As for the asvape lucifer, I went looking and wow, now that is a nice looking mod and at a very good price, I also like the fact you can fit up to a 28mm tank.

I just may have to order one and pair it with a gold Kylin

 

[DavidOck]

The tide is out this morning, it's so far out I can hardly see the sea, the beach patrol are out (it happens all the time). People try to walk out to the sea but they sink in the sand, it's very dangerous, people have been sucked under and died, including dogs, there are massive warning signs up all down the beach but some people just choose to ignore them.

Is it that they ignore the signs, or just don't know how to read? In either case, Go Darwin!

 

[Rixsta]

Is it that they ignore the signs, or just don't know how to read? In either case, Go Darwin!

 

[TrollDragon]

What size is it? Not finding it listed in the specs I looked at just now. With the raised 510 area, I'd think you'd really want to use a tank that's the same size if you care about looks.

The top raised section is only 24mm so the overhang of a 25mm tank might drive the OCD crazy...
It does have a VO chipset that I'd really like to check out.

Tony has a decent review of it.

 

[Shawn Hoefer]

The top raised section is only 24mm so the overhang of a 25mm tank might drive the OCD crazy...
It does have a VO chipset that I'd really like to check out.

Tony has a decent review of it.

Again with the "art" on the mod. I'm all for pretty mods, but IMO that ain't it. And that they're all the same (2?) Images. Ugh. If people want art or color, JWraps and ilk can do that without the mod manufacturers pushing out fugliness.

Wait... where did that rant come from?

I prefer stainless (silver), black, wood (not stabwood), or resin. I also prefer naked mods, but I'm not opposed to skins. Sleeves, OTOH, are nasty.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[TrollDragon]

Again with the "art" on the mod. I'm all for pretty mods, but IMO that ain't it. And that they're all the same (2?) Images. Ugh. If people want art or color, JWraps and ilk can do that without the mod manufacturers pushing out fugliness.

Wait... where did that rant come from?

I prefer stainless (silver), black, wood (not stabwood), or resin. I also prefer naked mods, but I'm not opposed to skins. Sleeves, OTOH, are nasty.

Sent from my SAMSUNG-SM-N910A using Tapatalk

I don't the CK|S (Cloud Kicker Society) logo, it's part of their branding.
OUR MISSION – CKS Brand

 

[TrollDragon]

Now the Asmodus Plaque is one ugly mod, all those engravings to catch dirt.

 

[Rixsta]

Picked up a couple of movkin disguiser 150w mods, they were having a flash sale for silly money, picked them both up for next to nothing, both of them were cheaper than a sub ohm tank lol.

Anyway, apart from them being a steal I know you can buy a sqounk conversion kit for them for like 10 bucks. Very cheap way to try sqounking.

So yeah, this will be my first venture into the sqounk world.

Morning Y'all

Now the Asmodus Plaque is one ugly mod, all those engravings to catch dirt.

I've had a mod like this before, can't remember what it was, you could swap out the panels too, it was the fully engraved version, hotcig if I remember.

They are popular with the Asian community over here and easy to keep clean, just use a baby wipe on them, they don't get dirty. Too busy looking though, even for me.

 

[DavidOck]

So yeah, this will be my first venture into the sqounk world.

Darn, we're losing him!

 

[Shawn Hoefer]

Picked up a couple of movkin disguiser 150w mods, they were having a flash sale for silly money, picked them both up for next to nothing, both of them were cheaper than a sub ohm tank lol.

Anyway, apart from them being a steal I know you can buy a sqounk conversion kit for them for like 10 bucks. Very cheap way to try sqounking.

So yeah, this will be my first venture into the sqounk world.

Morning Y'all


I've had a mod like this before, can't remember what it was, you could swap out the panels too, it was the fully engraved version, hotcig if I remember.

They are popular with the Asian community over here and easy to keep clean, just use a baby wipe on them, they don't get dirty. Too busy looking though, even for me.

The Disguiser is actually a pretty nice mod. The ONLY thing I didn't like was the omission of a USB port... I would have liked to see some firmware updates as the TC is finctional, but shaky...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[DavidOck]

finctional

Is that a cross between fictional and functional?

 

[Rixsta]

The Disguiser is actually a pretty nice mod. The ONLY thing I didn't like was the omission of a USB port... I would have liked to see some firmware updates as the TC is finctional, but shaky...

Sent from my SAMSUNG-SM-N910A using Tapatalk

I don't use TC so that's not an issue

Darn, we're losing him!

Ha, might not like sqounkin, we shall see

 

[TrollDragon]

Ha, might not like sqounkin, we shall see

Squonking is where it's at! One of these days I need to get me a Little Orca made by minimalsaint.

 

[Shawn Hoefer]

Just saw that efun has one of my all time favorite mods for $20... the Eleaf iStick TC100... firmware upgrade to 120, or run it with a single cell at 75. Ni, Ti, SS and TCR, too!

Eleaf iStick TC 100W Express Kit--Firmware Upgradable - $19.99

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[bsidb]

Just saw that efun has one of my all time favorite mods for $20... the Eleaf iStick TC100... firmware upgrade to 120, or run it with a single cell at 75. Ni, Ti, SS and TCR, too!

Eleaf iStick TC 100W Express Kit--Firmware Upgradable - $19.99

Sent from my SAMSUNG-SM-N910A using Tapatalk

I would but I know id get a white one,its random draw only, I got a white Vaporesso Target I hate because its white(don't use it)

 

[Rixsta]

What do you make of the new fusion 2 in 1 kit, useful or a gimmick ?

 

[DavidOck]

To me, gimmick. Can't see why I'd need to have a special 2 coil tank and a special mod to select on or the other when it's really easy to put one mod down and pick up another. Why complicate what's simple? The more parts, the greater the chance of something failing.

 

[Shawn Hoefer]

What do you make of the new fusion 2 in 1 kit, useful or a gimmick ?

Gimmick.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Sir Kadly]

What do you make of the new fusion 2 in 1 kit, useful or a gimmick ?

If I understand it right, novelty item at best. It seems the tank has two juice reservoirs? And each coil can be fired at different wattages if desired to mix the two flavors in differing amounts? Am I getting it?

 

[Debadoo]

Ugh. If people want art or color, JWraps and ilk can do that without the mod manufacturers pushing out fugliness.

I agree. I prefer to not have their art or logos on my mods.

Anyway, apart from them being a steal I know you can buy a sqounk conversion kit for them for like 10 bucks. Very cheap way to try sqounking.

So yeah, this will be my first venture into the sqounk world

kewl! I'm not familiar with those, @kad2371 might be. Not sure if it's a good squonk mod or not. A conversion kit could be prone to leaking not sure. Ya gotta wait for it to come from China, but I do highly recommend the Coppervape for a cheap way to try squonking. But since you already wanted these, don't blame ya for trying it that way.

Darn, we're losing him!

he is headin for the squonk side!!

Ha, might not like sqounkin, we shall see

blasphemy!

I would but I know id get a white one,its random draw only, I got a white Vaporesso Target I hate because its white(don't use it)

get a wrap for it?