Tootle Puffers, Part Three! (The Sequel of the Redux)

[Cosmic_Glaze]

Thanks @Bea-FL and @Cosmic_Glaze. I tend toward higher VG in my juices, and I switch flavors frequently..... I'm going to be doing some traveling over the next few months - was looking for something so that I wouldn't have to haul a bunch of my gear......

The icare is good..but you are stuck with exactly what it is..one coil option and generally 50/50 works best..don't get me wrong this little thing kicks .... for what it is, great for work, easy to carry anywhere and will deliver the nic and the vapor is good. I am a moody" vaper....my vaping moods always have me changing juice and coil builds along with different air flow types....which has me interested in the Kanger cupti or maybe the Aspire Plato (AIOs) that will give more options to play with..

 

[smacuser]

How was it? I wish I'd known this was so close to me. I really want to see one close up.

Hi Bea, It was a lot of fun; lots of houses, school buses, trailers and pop-ups. The weather, as you can imagine, was great. We spent about 4 hours there. My wife received free admission for having her nursing license. It's still on today until 5pm.

Though, St. Aug seem to be the only regional stop for Florida, so it was super crowded with long lines of traffic, as well as lines to see the houses and to get food. But then, again, we got there just at peak time.

The only real set back was, while in my pocket, my Clouper got pushed to 30watts when I went to hit my cartotank.

 

[Katdarling]

OUCH, smacs! That's not good!!!!!! And sadly, I can relate. I recently had a DNA40 decide to take the HIGH road, and shifted by itself from 9.5w to FOOOOOOOOOOOOOOOORTY watts. Might I just say.......YOWZA!!!!!!

redskelton, hope you're feelin' tip top by now.


Happy TDay shopping, TPuffers.

Hugs all around~

 

[pufZeppelin]

and then there is the eVic A.I.O. from Joye (not seen it mentioned, yet)

trying to figure if the BF RBA will work inside the onboard tank ?? (would be a deal breaker for me)

and although it comes with the very-cool tank-screw-on-adapter , I wouldn't care to buy it JUST for use that way...

​

 

[Krisma]

Been absent a bit. Walking pneumonia kicked my ..... Id rather not have that again lol.

WOW are you ok. It knocks you around so take it easy.

 

[DingerCPA]

and then there is the eVic A.I.O. from Joye (not seen it mentioned, yet)

trying to figure if the BF RBA will work inside the onboard tank ?? (would be a deal breaker for me)

and although it comes with the very-cool tank-screw-on-adapter , I wouldn't care to buy it JUST for use that way...

View attachment 615575

View attachment 615577
​

Dearest Puf..... You are quite the Tempter! I would like to find something that already takes any of the coils which I currently have stashed. I'd actually be o.k. if it was internal battery. I do have my iStick 30 and 50 which still work - would just have to take spare toppers. Idunno.... I'll figger sumpthin out

 

[Krisma]

Sold my Eleaf mod with my Nautilus mini to a buddy of mine (newbie vaper fresh off cigs)....now there is a void in my life....where a Nautilus coil used to be....
Anybody have the Aspire Plato? It lacks a rba which is kinda a bummer but it has the Nautilus coils....The Kanger Cupti ( has rba) n looks kinda interesting. Not sure how good the MTL coils are though....a nice All in One (18650) box mod might fill that void and be a fun toy.

You could say I was not a fan of the Plato. (Time difference is lots and it's now my breakfast time)

 

[DingerCPA]

RH - welcome back, Sir. Sorry you were under the weather I used to get walking pneumonia as a kid. Not sure of the difference between that and bronchitis, but both were quite nasty.....

 

[DingerCPA]

You could say I was not a fan of the Plato. (Time difference is lots and it's now my breakfast time)

Mornin' Kris

 

[Krisma]

I thought that they (Plato)did not leak at all? Were you thinking of the NeBox? That one leaked big time. The solution to it was to add a oring on it. They are selling those for $20 now. Reviews say they are great when they don't leak. That would be disappointing if the Plato is a leaker..it's a good looking device.

It does leak

 

[Krisma]

and then there is the eVic A.I.O. from Joye (not seen it mentioned, yet)

trying to figure if the BF RBA will work inside the onboard tank ?? (would be a deal breaker for me)

and although it comes with the very-cool tank-screw-on-adapter , I wouldn't care to buy it JUST for use that way...

View attachment 615575

View attachment 615577
​

I use the Evic AIO's and I like them a lot. But the design is really for DTlung vapers. The RBA does work but only for vertical coils as the chimney piece is too short for a nice horizontal coil. GT made me some little adapter to improve them. They are not my all day vapes but they have a place in my gear and I can put some of my panels on them.

 

[Krisma]

Mornin' Kris

Top of the morning to you

It's going to be a hot one today (hail and cold to damm hot in one week)

 

[Bea-FL]

The icare is good..but you are stuck with exactly what it is..one coil option and generally 50/50 works best..don't get me wrong this little thing kicks .... for what it is, great for work, easy to carry anywhere and will deliver the nic and the vapor is good. I am a moody" vaper....my Vaping moods always have me changing juice and coil builds along with different air flow types....which has me interested in the Kanger Cupti or maybe the Aspire Plato (AIOs) that will give more options to play with..

if you get the Plato report back about the leaking, I really like its looks.

 

[Krisma]

if you get the Plato report back about the leaking, I really like its looks.

It definitely leaks. I had one for about 2 hours before I sold it

 

[Bea-FL]

Hi Bea, It was a lot of fun; lots of houses, school buses, trailers and pop-ups. The weather, as you can imagine, was great. We spent about 4 hours there. My wife received free admission for having her nursing license. It's still on today until 5pm.

Though, St. Aug seem to be the only regional stop for Florida, so it was super crowded with long lines of traffic, as well as lines to see the houses and to get food. But then, again, we got there just at peak time.

The only real set back was, while in my pocket, my Clouper got pushed to 30watts when I went to hit my cartotank.

Hubby works every weekend but had we known he could have taken a day off. Oh well. I'll keep checking for the next one.

And ouch on the Clouper. I assume you didnt turn it off when you put it in your pocket - it's a PITA to have to do that every time for sure. I usually remember to turn mine off when I put in in my purse but not always because on the provaris you have to click 9 times to get to the power off. Very inconvenient.

 

[Bea-FL]

and then there is the eVic A.I.O. from Joye (not seen it mentioned, yet)

trying to figure if the BF RBA will work inside the onboard tank ?? (would be a deal breaker for me)

and although it comes with the very-cool tank-screw-on-adapter , I wouldn't care to buy it JUST for use that way...

View attachment 615575

View attachment 615577
​

Good looking mod. The reviews I read were good.

 

[Bea-FL]

You could say I was not a fan of the Plato. (Time difference is lots and it's now my breakfast time)

Do tell why you don't like it.

Never mind, just saw your post.

 

[DPLongo22]

You could say I was not a fan of the Plato. (Time difference is lots and it's now my breakfast time)

It does leak

It definitely leaks. I had one for about 2 hours before I sold it

I didn't want to put you TOO much on the spot (as if the time-zone reference wasn't enough).

 

[Krisma]

Do tell why you don't like it.

Never mind, just saw your post.

I think my expectations where too high for what it cost and how it looked. If it was cheap I would reconsider but it's mostly plastic and not worth full ticket odds.

Other people like it but not for me, I have better performing gear already.

 

[pufZeppelin]

I use the Evic AIO's and I like them a lot. But the design is really for DTlung vapers.
The RBA does work but only for vertical coils as the chimney piece is too short for a nice horizontal coil. GT made me some little adapter to improve them. They are not my all day vapes but they have a place in my gear and I can put some of my panels on them.

what about using that ' adapter ' piece for making the horizontal coils
I guess the RBA comes with both ? ? ?