Tootle Puffers, Part Three! (The Sequel of the Redux)

[Alter]

That's fine. I use just 1 drop of dawn in a wash

No matter what atomizer your using they all manage to get juice film on them. Just hot water doesn't clean them, just rinses them off and the film is still there. I use just a bit of dish soap when I clean and a mini brush from fasttech that also fits nicely into driptips. Never have tasted soap yet in any atty.
I'm not sure about using vinegar to clean attys but I do put some vinegar into the pail of Murphys oil soap that I clean our laminate floor with, it knocks the suds down so your not moping suds all over the place. It should work in a ultrasonic the same way but still vinegar is IMO iffy.

 

[Shawn Hoefer]

@Shawn Hoefer , does the Wanko come with the bf pin? How is the draw on it? I have a Chalice lll, RM2, NoFear, Hadaly.

The Wanko does have a BF pin. The air is adjustable from restricted lung down to decent MTL. I recommend swapping DT if using MTL. It'd be closest in design to the Hadaly... very close to a Narda...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Bea-FL]

@shawn what is a BF pin?

 

[brewbear]

The Wanko does have a BF pin. The air is adjustable from restricted lung down to decent MTL. I recommend swapping DT if using MTL. It'd be closest in design to the Hadaly... very close to a Narda...

Sent from my SAMSUNG-SM-N910A using Tapatalk

NarDa sounds good to me!

 

[Shawn Hoefer]

@shawn what is a BF pin?

Bottom Feed... aka squonk pin.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[brewbear]

@shawn what is a BF pin?

I'm not not Shawn, but a bf pin is a 510 center pin (the one that makes the contact between the atomizer and the mod) with a hole drilled thru the center. It is used in squonking

 

[ChelsB]

Bottom Feed... aka squonk pin.

Sent from my SAMSUNG-SM-N910A using Tapatalk

But BF is not exclusively for squonking, is it?

 

[Uncle]

I must say, following the topics in this thread is like herding cats!

​

 

[Shawn Hoefer]

But BF is not exclusively for squonking, is it?

Joyetech makes a BF (bottom fed) coil, so called because the wicking holes are around the bottom of the coil. So, no, but really, yes. Although the BF coils are indeed bottom-ish fed, the atomizer is not.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[LynnNC]

Sad to say, I am an old guy. I never ask questions. It says so in "The Guy Book" that my Dad gave me on my 13th birthday.

But, I do read here, very much.

I'm an old woman and I will ask a question only after I have researched it and just can not find my answer. For example...last year for my birthday I received a Hana One mod with no instructions. Yes, I read instructions for EVERYTHING. So I googled Hana Mods, went to the site, found my mod and downloaded the instructions for it. Google is my friend for most of the answers to my questions.

 

[Frenchfry1942]

I was j/k @LynnNC . I have no problem picking on the stereotypical male that doesn't read directions or read a map.

Old school people can be fun to watch.

 

[LynnNC]

I was j/k @LynnNC . I have no problem picking on the stereotypical male that doesn't read directions or read a map.

Old school people can be fun to watch.

I know! I also know females like that as well!

 

[Two_Bears]

​

Thats the old EDS commercial for the Super Bowl years ago.

 

[DancingHeretik]

But BF is not exclusively for squonking, is it?

Joyetech makes a BF (bottom fed) coil, so called because the wicking holes are around the bottom of the coil. So, no, but really, yes. Although the BF coils are indeed bottom-ish fed, the atomizer is not.

Exactly. Just because they use the term BF doesn't mean it is. BF actually is for squonking. The coils are only called BF. But, they are not. Joyetech just misused the term. That's why everyone was so confused when you first asked about them.

 

[LynnNC]

Joyetech makes a BF (bottom fed) coil, so called because the wicking holes are around the bottom of the coil. So, no, but really, yes. Although the BF coils are indeed bottom-ish fed, the atomizer is not.

Sent from my SAMSUNG-SM-N910A using Tapatalk

But, when most people are talking about squonking they use the term BF pin right?

 

[DancingHeretik]

But, when most people are talking about squonking they use the term BF pin right?

Yes, squonking requires a BF atty (which uses a BF pin).

 

[Plettschner]

I need a bit of help from the expert eggrollers. I have my roll on a Radius, right? Well I refilled my tank, screwed it back on and got an "OP" error on the Radius. So I figured I'd change out the coil and give it another go. Nope, same error. Tried a Nauti mini on the Raduis, worked fine. Tried the eggroll on a Pico and that worked fine. Any ideas?

Sent from my NX-74205 using Tapatalk

Interesting... I can't get the small eGo One to work on my Pico.


Sent from Uranus using Tapatalk

 

[Shawn Hoefer]

But, when most people are talking about squonking they use the term BF pin right?

Yes...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Plettschner]

Exactly. Just because they use the term BF doesn't mean it is. BF actually is for squonking. The coils are only called BF. But, they are not. Joyetech just misused the term. That's why everyone was so confused when you first asked about them.

I specify what I'm talking about...
BF = squonker
Cubis BF or Joyetech BF = Joyetech BF-series coils.


Sent from Uranus using Tapatalk

 

[LynnNC]

Patting myself on the back....I fixed the Wanko. Now it's working perfectly on the Coppervape. Only the atty is getting warm and not the whole mod!