Tootle Puffers, Part Three! (The Sequel of the Redux)

[Kenna]

You missed the other blue BB in the classies

Lol!

 

[Kenna]

Love my Pico, think I'm gonna order another, just need to find a decent topper for it. Goblin mini is en-route, but you can never have too many tanks!
So my dad bought ANOTHER tractor, had to drive over 100 miles there and back. All went well, but one issue. We used a log chain to lift the extra blade with the bucket and load it. Well at 70mph, the chain jumped out of the bucket, found the crack in the deck boards and ended up under the drivers side tires.
Long story short, when the chain turns bluish/purple, don't grab it! I was in traffic and trying to hurry. I've got one hand completely bandaged up, the other is doing OK with Aloe Vera so far. DO NOT try this at home, it flat HURTS!!!

Oh no! Not good at all!

 

[sawlight]

Got my Goblin mini today, so far I'm loving it, I say that and it starts leaking! I'll open the AFC and try again.
I went ahead with a dual build .75 ohm and flavor is great at 20w. I wicked it at like Grimm showed, so I'm not sure if I just shut down the air too much for that build?
I looked at the Pico atty as well, seems like it's pretty fiddly to build and keep from leaking, that's why I went with the Goblin instead.

 

[Kenna]

View attachment 556353

Where did you find the case? [emoji7]

 

[fourthrok]

My life right now. Trigger warning!

Spoiler

I'm suffering severe. My hallucinations has gotten worse. My depression is worse than ever. I've gotten into serious self harm. And during the night before today I took an drug and pill overdose so severe I nearly died. My life barely got saved. My brother was who saw me and called the ambulance. I'm now on observation and they suspect my liver is severly damaged after months of drug, alcohol and pill abuse and overdoses.

I don't know how to cope anymore. I've picked up smoking again. I

Thus why I haven't been posting here. Just thought you guys deserved an update.

Sent from my SM-G900F using Tapatalk

I haven't been around here much, myself. Just don't have much to contribute because I don't do RDAs or RTAs...so I don't have much to say. I did wonder where you were, and hoped you were okay. So sorry to hear things are not good.

 

[pokemom]

throk" data-source="post: 17789655" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

I haven't been around here much, myself. Just don't have much to contribute because I don't do RDAs or RTAs...so I don't have much to say. I did wonder where you were, and hoped you were okay. So sorry to hear things are not good.

But...we miss you!

 

[Maytwin]

So YOUR the reason my FT order with the SXK kayfun Mini V3 is on hold!

Sorry 'bout that

 

[DaveP]

Hi Tootle Puffs,

Just received an email from Casaa. Please sign the following petition from Rep. Faircloth from WV. He needs 100,000 signatures. Pass it on and get family members to sign as well!!

A real petition that needs your participation:

Del. Larry Faircloth (R-WV) has proven himself as a valuable and effective advocate for vapor products in West Virginia. Now, in the wake of the FDA deeming regulations, he is taking his talent and legislative experience to lawmakers in D.C.



Please take action NOW by signing Del. Faircloth’s petition -- which will be hand delivered to specific lawmakers -- and support his effort to stand up to the FDA’s overreaching and disastrous regulations on vapor products.



Take Action - Sign the Petition

I Signed The Petition Today. It's good to see action being taken to address the overreach of the FDA.

 

[DaveP]

Love my Pico, think I'm gonna order another, just need to find a decent topper for it. Goblin mini is en-route, but you can never have too many tanks!
So my dad bought ANOTHER tractor, had to drive over 100 miles there and back. All went well, but one issue. We used a log chain to lift the extra blade with the bucket and load it. Well at 70mph, the chain jumped out of the bucket, found the crack in the deck boards and ended up under the drivers side tires.
Long story short, when the chain turns bluish/purple, don't grab it! I was in traffic and trying to hurry. I've got one hand completely bandaged up, the other is doing OK with Aloe Vera so far. DO NOT try this at home, it flat HURTS!!!

Sawlight, I feel for ya. Hope your hands heal up quick. Your plight did remind me of a joke, though. I hope you can laugh later about what happened.

The blacksmith shop was in the older side of town where the retireds gathered to spit and whittle. They were of the habit of visiting the smithy, though he did not encourage them.

Old Jake took himself pretty seriously, and he was, as usual in such cases, quite alone in that opinion. He never let on there was anything he didn't know. He was experienced in all phases of human existance, and did not mind if you knew it.

Jake ambled on by the forge and idly reached for one of a row of horseshoes on the firewall before it. Jake didn't realize at the time, though he very quickly had an inkling, that the shoes had only seconds ago lost the reddish-white tint they have when first out of the fire.

Jake dropped the metal with a clang and jammed his smoking hand into his pants and attempted to whistle with jaws of pure granite to stifle a scream. The smithy saw all this out of the corner of his eye.

``Might warm, warn't it?'' asked the smithy with a near-smile. ``Nope,'' asserted Jake. ``Just don't take me long to look at a horseshoe.''

 

[Sir Kadly]

Got my Goblin mini today, so far I'm loving it, I say that and it starts leaking! I'll open the AFC and try again.
I went ahead with a dual build .75 ohm and flavor is great at 20w. I wicked it at like Grimm showed, so I'm not sure if I just shut down the air too much for that build?

V2? It is kinda finicky. Make sure you have enough wick. Pull wicks up, place chimney on threading wicks through chimney, cut slightly above top of chimney, keep 'em fluffed and gently push 'em down into chimney, then take something small and pointed and press once on each wick down into the juice channel.
Close afc, take top off, fill, put top on, turn upside down, wait a few seconds, slowly open afc.

 

[corn flakes]

I haven't been around here much, myself. Just don't have much to contribute because I don't do RDAs or RTAs...so I don't have much to say. I did wonder where you were, and hoped you were okay. So sorry to hear things are not good.

Hope you are well. I don't do RTA's. just a blister packing tootle puffer. Just have Kayfuns and mechs in my break glass in case of emergency box. I would be happy to never have to use them.

 

[LJFinFLA]

I haven't been around here much, myself. Just don't have much to contribute because I don't do RDAs or RTAs...so I don't have much to say. I did wonder where you were, and hoped you were okay. So sorry to hear things are not good.

Hi fourth! So glad to see ya! Hope that all is well with you. We do miss you.

 

[sawlight]

V2? It is kinda finicky. Make sure you have enough wick. Pull wicks up, place chimney on threading wicks through chimney, cut slightly above top of chimney, keep 'em fluffed and gently push 'em down into chimney, then take something small and pointed and press once on each wick down into the juice channel.
Close afc, take top off, fill, put top on, turn upside down, wait a few seconds, slowly open afc.

No, it's a V1, but yeah, LOTS of wick in it as well! I cut the wick off even with the top of the chimney at first try, that's when it flooded. Cut the wicks longer on the second try and it's happy as a clam now! Jut have to change my KFL ways! Go from a little to a lot for these beasties!

 

[Sir Kadly]

No, it's a V1, but yeah, LOTS of wick in it as well! I cut the wick off even with the top of the chimney at first try, that's when it flooded. Cut the wicks longer on the second try and it's happy as a clam now! Jut have to change my KFL ways! Go from a little to a lot for these beasties!

Glad ya got it worked out. I like my v2, but had some serious leaking issues till I figured out the wicking. Prefer top fill, so I don't know if I'd care for the v1, but never tried one. I imagine they are pretty similar otherwise.

 

[DingerCPA]

Yay - vapemail My Fastech package has just arrived (Pico kit, SXK Kayfun mini V3 styled RTA, Kuro coiler 3-piece set - and some blister pack coils )

So YOUR the reason my FT order with the SXK Kayfun Mini V3 is on hold!

What HE says ^^^^

I ended up cancelling because I was tired of waiting. Grabbed two Tobecos from VapeNW instead. I'll have those Monday

 

[tj99959]

WOW Sawlight that's scary! My dad's best friend was killed when a dragging chain went under a tire and caused him to loose control.

 

[Shawn Hoefer]

Vapemail? Did someone say vapemail?

Yep. I finally got my Pico on my Pico.

And then this came in for review...

The Enova Gyrfalcon. 8 bays at up to 1 amp per... digital display... bells... whistles... wow...

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Krisma]

Not sure who gave me this link about that charger but some great detailed information

Test/Review of Charger GyrFalcon All-88 (Enova)

 

[juskiddin]

I will, but it may be some time - I have to (gulp) learn to build a coil first Apart from that it looks really nice

I'm in the same boat (I do enjoy company ). My kayfun arrived Monday and I haven't opened it yet.

 

[DingerCPA]

I'm in the same boat (I do enjoy company ). My kayfun arrived Monday and I haven't opened it yet.

We gotcha Lady JK..... do not fear!