Tootle Puffers, Part Three! (The Sequel of the Redux)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
Thank you both so much! I have decided to hold the tank in reserve until I get a tc battery/mod. This has been an expensive month, so I won't be doing that probably for at least two months or more.
The photos of the coils is extremely helpful. Thank you again so much.
I don't know what I'd do if it weren't for my beloved fellow tootle puffers. (yes, I'm an old girl, lol).
@Uncle it took me a bit to understand it myself, like I said when I first tried it on my Pico I left it at 75w and adjusted the temp, it was warm but vapable. When I got my Istick 200w I tried it at 200w, way too hot and constantly in protection mode. I did some reading and learning and it finally clicked how the wattage was the ramp up to get to the temperature.
With my KF's and Squapes I still sometimes like to take a primer puff then a long draw. 15w for the ramp up is pretty nice for that, but a lot of times I'm still at 30w.
Like I said, try it as a baseline and tweak it, there really is no correlation to any of it with TC, it all to personall taste.
With my KF's and Squapes I still sometimes like to take a primer puff then a long draw. 15w for the ramp up is pretty nice for that, but a lot of times I'm still at 30w.
Like I said, try it as a baseline and tweak it, there really is no correlation to any of it with TC, it all to personall taste.
I can't read the stamp on the coil, but yes, it has that blue band. The tank came with two coils, one of them is lost somewhere and the other is in the tank.View attachment 596293
yepper, all the coils look the same, what do you read on the side of said coils ??
the iStick 30 will only read/fire down to .5Ω ~ and NO TEMP CONTROL coils
try another coil that reads above .5Ω on the side of the coil
I guess if I want to use this tank without tc i can put a 1.2 coil into the tank? Sorry, I'm a little on the slow side. [emoji33]
Sent from my Nexus 5 using Tapatalk
hey NO PROBLEM (we all be a learning)
but YES that is what's wrong
if you have a blue "o-ring" that means your coil is Ni and Won't work on the iStick 30w
order some standard (1.2Ω-1.5Ω-.75Ω) coils and you be good to go...
eta: here's a couple links to the coils that will work for you...
- Eleaf GS Air Coils Organic Cotton - Eleaf Coils - Eleaf - Tanks & Coils
- Eleaf GS Air 2 Coils Organic Cotton - Eleaf Coils - Eleaf - Tanks & Coils
Thank you so much!hey NO PROBLEM (we all be a learning)
but YES that is what's wrong
if you have a blue "o-ring" that means your coil is Ni and Won't work on the iStick 30w
order some standard (1.2Ω-1.5Ω-.75Ω) coils and you be good to go...
Sent from my Nexus 5 using Tapatalk
Thank you, I'll see if I can find them. I have plenty of 1.2 coils for the older GS Air tanks I've been using.
Sent from my Nexus 5 using Tapatalk
"If you ain't screwing something up once in a while, you aren't doing anything to start with!" An old boss of mine
Thank you, I'll see if I can find them. I have plenty of 1.2 coils for the older GS Air tanks I've been using.
what you mean OLDER GS ???????????????
those will work in your tank, on your istick30
I meant the original GS Air tanks, before they came out with the newer tc tanks, and the finger adjustable air flow ones other than the older ones with the tiny screwdrivers. I don't know how else to explain what I meant. [emoji173]what you mean OLDER GS ???????????????
those will work in your tank, on your istick30
Sent from my Nexus 5 using Tapatalk
well if they look like these, screw them in and they should work...
you don't mean these do you ?
Yes, they look like the first kind.
Sent from my Nexus 5 using Tapatalk
Yes, they look like the first kind.
well I say those will work, if they screw into the base and the base will screw tight into the tank - ROLL WITH IT !
here's thread ya might wanna read...
Eleaf GS Air Fan : Part 2
OK, thanks again! I will try one of my 1.2 coils in it, later on after I finish the in-use juice in my older GS Air tank. Everything is much clearer to me now.well I say those will work, if they screw into the base and the base will screw tight into the tank - ROLL WITH IT !
here's thread ya might wanna read...
Eleaf GS Air Fan : Part 2
~ groovy ~
let us know how it turns out
let us know how it turns out
Thank you, i will.~ groovy ~
let us know how it turns out
Sent from my Nexus 5 using Tapatalk
I saw that thread. Do not know how to help them.
Happy Laborious Day, TPuffs. Who is responsible for the day? You get to pick one of the Maguire / McGuire "brothers"...
Puff2K, glad you got your coils/GS Air tank straightened out!
Uncs, you're too funny. TWO and ONE HALF hours to post?
Love me some spreadsheet on a Monday morning.......
Hiding under a Google Doc Roc.
And this is why I adore ECF...
Fixed that fer ya.
Hugs all around~
Puff2K, glad you got your coils/GS Air tank straightened out!
Uncs, you're too funny. TWO and ONE HALF hours to post?
Love me some spreadsheet on a Monday morning.......
Hiding under a Google Doc Roc.
And this is why I adore ECF...
Yep - Easy for "You" to say, Ya' Got "DP" to get "You"out ofINTO trouble . . . Just Sayin' . . .
Fixed that fer ya.
Hugs all around~
Similar threads
- Locked
