Tootle Puffers, Part Three! (The Sequel of the Redux)

corn flakes

Ultra Member
ECF Veteran
Verified Member
Dec 29, 2014
2,852
19,931
Brant County Canada
I took the top off the barrel, screwed it to the top of the tank, then screwed it to the base. Easy peasy and it's a great fit!! Woohoo! The black tank that I linked to seems to already have a chimney in it, does that look right?

It looked right to me. I added it to the cart.
 

Sugar_and_Spice

ECF Guru
ECF Veteran
Verified Member
Sep 11, 2010
13,663
35,225
between here and there
I took the top off the barrel, screwed it to the top of the tank, then screwed it to the base. Easy peasy and it's a great fit!! Woohoo! The black tank that I linked to seems to already have a chimney in it, does that look right?
As long as the base and deck screw into it, it looks ok to me. I looked at the description at FT but it doesn't list what the threads are. Let us know if you can put it together. I am wondering if that chimney screws off or if its permanently a part of the tank.

:)
 

LynnNC

Resting In Peace
ECF Veteran
Verified Member
Sep 1, 2014
10,347
88,071
NC
As long as the base and deck screw into it, it looks ok to me. I looked at the description at FT but it doesn't list what the threads are. Let us know if you can put it together. I am wondering if that chimney screws off or if its permanently a part of the tank.

:)
It screws off and it screwed down to the other base that I bought. The base I linked to, I bought 2 of. I'm going to use one with the 5 pawns chimney and the other with the black tank.
 

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,648
T for Texas!
It screws off and it screwed down to the other base that I bought. The base I linked to, I bought 2 of. I'm going to use one with the 5 pawns chimney and the other with the black tank.
Yes, the black tank has it's own plastic chimney barrel. @Two_Bears doesn't care for them but I like them :)

I do bottom fill those though using the screw in the bottom of the KF base.
 

Sugar_and_Spice

ECF Guru
ECF Veteran
Verified Member
Sep 11, 2010
13,663
35,225
between here and there
Yes, the black tank has it's own plastic chimney barrel. @Two_Bears doesn't care for them but I like them :)

I do bottom fill those though using the screw in the bottom of the KF base.
Good idea. I have found that when using the fill port that you have to be careful of the pressure entering the tank. Filling too fast can cause the juice to be forced out thru the air holes and then you are left with a mess. Same thing on the top filled clone set ups as I have tried using those type of top caps also(different tanks, same base and chimney set up). But it is still a very flavorful vape.
 

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,648
T for Texas!
It screws off and it screwed down to the other base that I bought. The base I linked to, I bought 2 of. I'm going to use one with the 5 pawns chimney and the other with the black tank.
This is the way to go Lynn... hook a brother up w some pics when you get 'em running!

I've got 3 vape drawers full of these KFL pieces and parts. If a serious vapeapocolypse does occur these are my #1 go to RTAs, for many good reasons (price, best flavor, ease of build, looks, etc.).

Once you get going you can add the following for a different look if you like:
$1.69 Acrylic Kayfun Bell Cap - yellow at FastTech - Worldwide Free Shipping

Using this one you would use the full chimney, including the cone piece.

Have fun!!
 

LynnNC

Resting In Peace
ECF Veteran
Verified Member
Sep 1, 2014
10,347
88,071
NC
This is the way to go Lynn... hook a brother up w some pics when you get 'em running!

I've got 3 vape drawers full of these KFL pieces and parts. If a serious vapeapocolypse does occur these are my #1 go to RTAs, for many good reasons (price, best flavor, ease of build, looks, etc.).

Once you get going you can add the following for a different look if you like:
$1.69 Acrylic Kayfun Bell Cap - yellow at FastTech - Worldwide Free Shipping

Using this one you would use the full chimney, including the cone piece.

Have fun!!
Thanks! I'll try and put a build in it tonight after I get off work. One of these will be my Provari tank.
 

Plettschner

Ultra Member
ECF Veteran
Verified Member
May 2, 2013
1,085
5,979
CT
KFL Bellcap filling...


7a059dc12358fd09f1c3e0bc5c877e1f.jpg



3778124c2c0794e6d3173f412da50697.jpg



eff592a5aa01317ca7dac954ef983a53.jpg



f0c6aea56a2bd745ee5ec8a811f99580.jpg




Sent from Uranus using Tapatalk
 

gerrymi

Vaping Master
ECF Veteran
Jul 12, 2013
3,917
14,560
The 'Burgh, PA.



M.A.C
....can't say I've ever heard of 'em...

The only "Mother's" organization I have heard of is D.A.M...(Mother's Against Dyslexia)...


So you guys like the icare? I'm thinking about getting one.

Eleaf just came out with 4 additional iCares...

All 4 have Fire Buttons (the original 2 were "automatic")...all 4 (like the original 2) use the IC 1.1ohm Heads...and they vary in price from $12 to $17...

iCare-orig....1.8ml...650mAh...15Watts...14mm x 30mm x 75mm.....

iCare-Mini....1.3ml...320mAh...15Watts...12mm x 24.5mm x 75mm...fits PCC...

iCare-Solo....1.1ml...320mAh...15Watts...11mm x 18mm x 104.5mm....

iCare-110....1.3ml....320mAh...10Watts...11mm x 136mm...

iCare-140....2.0ml...650mAh...10Watts...14mm x 122mm...spiral DT...

iCare-160....3.5ml...1500mAh..15Watts...16mm x 168mm...7 color LED...


RUMV1XL.jpg



..
 
Last edited:

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
M.A.C....can't say I've ever heard of 'em...

The only "Mother's" organization I have heard of is D.A.M...(Mother's Against Dyslexia)...




Eleaf just came out with 4 additional iCares...

All 4 have Fire Buttons (the original 2 were "automatic")...all 4 (like the original 2) use the IC 1.1ohm Heads...and they vary in price from $12 to $17...

iCare-orig....1.8ml...650mAh...15Watts...14mm x 30mm x 75mm.....

iCare-Mini....1.3ml...320mAh...15Watts...12mm x 24.5mm x 75mm...fits PCC...

iCare-Solo....1.1ml...320mAh...15Watts...11mm x 18mm x 104.5mm....

iCare-110....1.3ml....320mAh...10Watts...11mm x 136mm...

iCare-140....2.0ml...650mAh...10Watts...14mm x 122mm...spiral DT...

iCare-160....3.5ml...1500mAh..15Watts...16mm x 168mm...7 color LED...


RUMV1XL.jpg



..

Oh good. Even more models I'll never be able to keep up with.
 

ToolmanTexas

Ultra Member
ECF Veteran
Verified Member
May 14, 2014
2,747
14,648
T for Texas!
M.A.C....can't say I've ever heard of 'em...

The only "Mother's" organization I have heard of is D.A.M...(Mother's Against Dyslexia)...




Eleaf just came out with 4 additional iCares...

All 4 have Fire Buttons (the original 2 were "automatic")...all 4 (like the original 2) use the IC 1.1ohm Heads...and they vary in price from $12 to $17...

iCare-orig....1.8ml...650mAh...15Watts...14mm x 30mm x 75mm.....

iCare-Mini....1.3ml...320mAh...15Watts...12mm x 24.5mm x 75mm...fits PCC...

iCare-Solo....1.1ml...320mAh...15Watts...11mm x 18mm x 104.5mm....

iCare-110....1.3ml....320mAh...10Watts...11mm x 136mm...

iCare-140....2.0ml...650mAh...10Watts...14mm x 122mm...spiral DT...

iCare-160....3.5ml...1500mAh..15Watts...16mm x 168mm...7 color LED...


RUMV1XL.jpg



..
I have the Solo on the way from the slow boat.
 

englishmick

Vaping Master
ECF Veteran
Verified Member
Sep 25, 2014
6,589
35,823
Naptown, Indiana
Reminds me of the old joke about the dyslexic agnostic insomniac.

He was up all night wondering if there really was a dog...


Jay :headbang:

Remember the masochist who liked a cold shower in the morning, so he had a hot shower instead.

Hey Jay - I copied your signature. Mine died months ago and I never got around to replacing it. cheers.
 

Plettschner

Ultra Member
ECF Veteran
Verified Member
May 2, 2013
1,085
5,979
CT

Users who are viewing this thread