Tootle Puffers, Part Three! (The Sequel of the Redux)
- Thread starter Katdarling
- Start date
- th_trl_thread_readers 0
That's why these are my favs, AFC on the side (like a Russian 91%)... unfortunately the silver is out of stockAs said, air flow adjust.
One tip for all KF bottom air flow screws. Once you know where you want it, back it out and put a tiny dab of rubber cement (or removeable thread locker if you have it, rubber cement it common) on the threads - I use a toothpick to do that - and then run it back to where you want it.
They can work out from normal use and vibration - locking the tank to your mod.
$4.31 Replacement Base for Kayfun Lite Plus - stainless steel / black plated at FastTech - Worldwide Free Shipping
$4.31 Replacement Base for Kayfun Lite Plus - w/ logo / stainless steel at FastTech - Worldwide Free Shipping
Aw, thanks. I was one of those almost immediate converts. I really, really hated smoking. It got to the point that I was using a bobby pin to hold my smokes because I couldn't take the smell on my hands. As soon as I got an Ego AOI I knew vaping would work. Now here I am, living the vape life and completely immersed in the culture and hobby aspects.
As said, air flow adjust.
One tip for all KF bottom air flow screws. Once you know where you want it, back it out and put a tiny dab of rubber cement (or removeable thread locker if you have it, rubber cement it common
They can work out from normal use and vibration - locking the tank to your mod.
I remove the little buggers. I don't need them (personal preference).
Ah yes, the ol' Classifieds. Always a good place to check on what might be for sale (coughcough).
"Mamu-Mamu."
These are the ones I originally ordered but the ship by dates kept getting longer and I got tired of waiting so I had them to cancel these so the others would ship.That's why these are my favs, AFC on the side (like a Russian 91%)... unfortunately the silver is out of stock
$4.31 Replacement Base for Kayfun Lite Plus - stainless steel / black plated at FastTech - Worldwide Free Shipping
$4.31 Replacement Base for Kayfun Lite Plus - w/ logo / stainless steel at FastTech - Worldwide Free Shipping
I tighten up good and tight
I tighten up good and tight
Amazingly, we can both use the exact same equipment even though our targets are polar opposites (within the range of said equipment). Which, I might add, is a HECKUVA lot better than having to choose between Regular, Medium or Light.
We ARE the fortunate ones (for now, at least).
Here's to the wonder & marvel of the vape.
That's NANU NANU.
Give those slacks back!
LMAOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
That's NANU NANU.
Give those slacks back!
FYI: If Ya' was a really old timer or "Verified" you would know right now it's an acceptable "Mamu-Mamu" . . .
FYI: If Ya' was a really old timer or "Verified" you would know right now it's an acceptable "Mamu-Mamu" . . .
Subliminally speaking, of course.
That's why these are my favs, AFC on the side (like a Russian 91%)... unfortunately the silver is out of stock
$4.31 Replacement Base for Kayfun Lite Plus - stainless steel / black plated at FastTech - Worldwide Free Shipping
$4.31 Replacement Base for Kayfun Lite Plus - w/ logo / stainless steel at FastTech - Worldwide Free Shipping
All my KFs have the afc's on the side as well and I take the adjustment screw out.I didn't know they made KFs with an afc on the bottom...learned something new today!
Guys! I want to cry. Been waiting, not so patiently, for my KF v5 mini clone to get here. Normally packages hit Phoenix and within 12 hours head from there to my local office, out for delivery the next day. My KF has been in Phoenix for over 48 hours! The screws I ordered after the KF passed it up and are out for delivery today! It's soon enough to know there's a problem but too soon to start making an official ruckus about it. I just want to get off this $2 KF 3.1!
Sometimes scanning takes a while to catch up. Depends how the upload is done. Or you could learn some patience
I've been playing with my 2$ KF 3.1.... intresting experiment to say the least... it Vaping, and the draw is great on it BUT......1)got a very slow leak coming out of the fill port, 2)not sure how to remove the check and the deck or to check the the amount of juice in it if you do not have it full stainless mode? (Tank cracking juice mode)...without losing all the juice you have in there.....3) it looks pretty ridiculous on most of my mods.. the Hana is ok.... the Pico is just plain funny looking.. 4) it's working fine but need to probably use a dremel to clean up the juice channels for higher VG...
It's made me appreciate all the things I take for granted on my KF5..
Might be your coil is touch low, that can cause a slow seep on near any bottom coil tank. Or a wicking issue.
Juice level in all steel config.... uh, dry hit? I don't vape crackers, so most of mine are transparent center. The ones that aren't are full clear M5 (which makes for a really light weight setup!)
Ya, I had to dremel out a couple of the FT bases, even for the 65pg I mix. Never had an issue with any of my EHPros.
Juice level in all steel config.... uh, dry hit? I don't vape crackers, so most of mine are transparent center. The ones that aren't are full clear M5 (which makes for a really light weight setup!)
Ya, I had to dremel out a couple of the FT bases, even for the 65pg I mix. Never had an issue with any of my EHPros.
Last week a buddy of mine let me play around with his Rig V1 mech mod for a couple of days to see if I liked it and wanted to buy one..... put in an order for the COV 1.5 Kindred this morning... 18650 & 18350 mode.. My first mech.....(yes, I know how to use one and have done months of research... battery safety, builds, ohms law...)
...(yes, I know how to use one and have done months of research... battery safety, builds, ohms law...)Similar threads
- Locked
