Tootle Puffers, Part Three! (The Sequel of the Redux)

h00ligan

Ultra Member
ECF Veteran
Verified Member
Jan 2, 2015
2,729
6,453
London, UK
Here's a current tiny tootle puffer setup.

Mega volt and doggystyle clone (on trial to see if the original is worth getting).

I actually have his built quite low with stainless steel 28/36 Clapton wire but I'm only putting 17 watts to it so it's a very smooth dense MTL vape.

The doggy clone is $12 or something. The mega volt is around $40.

Despite it having an built in battery (only way to get this size) it's a phenomenal mod for the money. It charges in half an hour or less with rapid charging (2.1 amp) and lasts well over a tank. I'd say I can vape a day from a full charge. Certainly a work day and with such a fast charge time it doesn't much matter anyway. All the shortcomings of the mini volt have been addressed even the fact it was a little too small to look normal with any tank.

The internal lipo battery lasts an amazingly long time. I didn't expect to get half the life I do. If you had a mini volt you know the battery life stunk up the joint and it took forever to charge. This is a whole different mini beast. For most of us in here this mod solves a lot of issues. And it's probably my favorite small regulated mod. The inexpensive price tag lies in stark contrast to outstanding build quality with no visible screws, no button rattle, a wobble free charging port, and a bright screen easily feasible even in the bright ARIZONA sun and with polarizing glasses on.

The one missing feature is manual the entry in temp control. You're restricted to titanium, nickel, and stainless 316. For most of us that's fine but I like to use nife as well. Still a very small miss.

If you're in the market for a smaller regulated mod I really can't think of anything better. I'm typically opposed to Internal batteries but I still have two of these and they have displaced all
My other inexpensive small regulated mods like the Pegasus mini, istick pico, and even the smy dna75 mod. I find myself reaching for this regularly and the profiles for power ramp up work very well too. Want a little more oomph, leave the power the same and change it from standard to powerful. Away from an outlet and low on power ? Turn on the auto power saving mode.

Very very good value on this little one especially for we the low power crowd.

55e217a0439f1c514c1da747a5b3705e.jpg
 

LynnNC

Resting In Peace
ECF Veteran
Verified Member
Sep 1, 2014
10,347
88,071
NC
Here's a current tiny tootle puffer setup.

Mega volt and doggystyle clone (on trial to see if the original is worth getting).

I actually have his built quite low with stainless steel 28/36 Clapton wire but I'm only putting 17 watts to it so it's a very smooth dense MTL vape.

The doggy clone is $12 or something. The mega volt is around $40.

Despite it having an built in battery (only way to get this size) it's a phenomenal mod for the money. It charges in half an hour or less with rapid charging (2.1 amp) and lasts well over a tank. I'd say I can vape a day from a full charge. Certainly a work day and with such a fast charge time it doesn't much matter anyway. All the shortcomings of the mini volt have been addressed even the fact it was a little too small to look normal with any tank.

The internal lipo battery lasts an amazingly long time. I didn't expect to get half the life I do. If you had a mini volt you know the battery life stunk up the joint and it took forever to charge. This is a whole different mini beast. For most of us in here this mod solves a lot of issues. And it's probably my favorite small regulated mod. The inexpensive price tag lies in stark contrast to outstanding build quality with no visible screws, no button rattle, a wobble free charging port, and a bright screen easily feasible even in the bright ARIZONA sun and with polarizing glasses on.

The one missing feature is manual the entry in temp control. You're restricted to titanium, nickel, and stainless 316. For most of us that's fine but I like to use nife as well. Still a very small miss.

If you're in the market for a smaller regulated mod I really can't think of anything better. I'm typically opposed to Internal batteries but I still have two of these and they have displaced all
My other inexpensive small regulated mods like the Pegasus mini, istick pico, and even the smy dna75 mod. I find myself reaching for this regularly and the profiles for power ramp up work very well too. Want a little more oomph, leave the power the same and change it from standard to powerful. Away from an outlet and low on power ? Turn on the auto power saving mode.

Very very good value on this little one especially for we the low power crowd.

55e217a0439f1c514c1da747a5b3705e.jpg
That's cute!!
 

RainSong

An adult who likes flavors.
ECF Veteran
Verified Member
Sep 11, 2016
2,018
12,492
47
Tempe, Arizona, United States
Yes he did call them out!! ... in a proper way. I tried to post another video, by a reviewer, who is having problems with them too, but (bad language) was used.. "Sry ECF and those who might have seen it. .. I was not paying attention to that, it was my fault, " I truly Love this site for the fact that if you disagree with someone it it can be cordial... Unlike other forums.
I saw it and that whole situation makes me angry. That response video fell squarely in the realm of fair use and the GMM people shouldn't be able to call copyright infringement on it.
 

Uncle

Resting In Peace
Supporting Member
ECF Veteran
Verified Member
Jun 15, 2011
32,527
116,452
Very odd: I received my stm from MBV today with a free full sized bottle of 18mg ejuice! I'm not complaining, but I thought that freebies were no longer allowed?


Sent from my iPhone using Tapatalk

NOT FREE - Payment to satisfy customer . . . or provide customer satisfaction with company . . . Just Sayin' . . . but then again what do I know - since I've only purchased 1 or 2 x's from them and thst is only whem they had a big enough sale . . . ;)
 

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
40,893
California
NOT FREE - Payment to satisfy customer . . . or provide customer satisfaction with company . . . Just Sayin' . . . but then again what do I know - since I've only purchased 1 or 2 x's from them and thst is only whem they had a big enough sale . . . ;)

I also thought that shops couldn't mix their own juice anymore, but maybe that's just in CA. This is a MBV brand of juice. I'll have to dilute it in order to try it as I'm at 12 mg. Hmm...maybe hub will want it as he's at 18mg, but I doubt he'll want it as its butterscotch (my ADV, by the way is a butterscotch, so I'm excited to try it). Hopefully, like many store bought juices it will be really flavorful so when I add vg it's not too diluted
ETA: have I just been unlucky lately and most people receive things gratis in their order?

Sent from my iPhone using Tapatalk
 
Last edited:

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
40,893
California
Do you all wash every brand new tank or just clones? I ask because the STM came with the stock coil already installed and when I bought a tank at a B&M last August, they didn't say anything about washing it. Now, my new tank is currently having a bath, but it just got me thinking


Sent from my iPhone using Tapatalk
 

corn flakes

Ultra Member
ECF Veteran
Verified Member
Dec 29, 2014
2,852
19,931
Brant County Canada
Do you all wash every brand new tank or just clones? I ask because the STM came with the stock coil already installed and when I bought a tank at a B&M last August, they didn't say anything about washing it. Now, my new tank is currently having a bath, but it just got me thinking


Sent from my iPhone using Tapatalk

I wash all my tanks.
 

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
40,893
California
I wash all my tanks.

Wish I could cuss. I just dropped my brand new tank in the sink while rinsing it and broke the glass. I'm upset because when I've changed the glass in the past (putting on more colorful o rings), the seal is never the same. There goes $18 literally down the drain :(


Sent from my iPhone using Tapatalk
16acf7d61d98a4664a48d1fd8259b9e1.jpg
 

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
Wish I could cuss. I just dropped my brand new tank in the sink while rinsing it and broke the glass. I'm upset because when I've changed the glass in the past (putting on more colorful o rings), the seal is never the same. There goes $18 literally down the drain :(


Sent from my iPhone using Tapatalk
16acf7d61d98a4664a48d1fd8259b9e1.jpg



Don't you dare throw that out lol, it's definitely fixable . Buy a 10 pack of replacements (below) or buy bell caps .

$3.30 Replacement Glass Tank for KangerTech SUBTANK Mini Clearomizer (10-Pack) at FastTech - Worldwide Free Shipping

Rule # 1 , do not change Subtank O rings unless absolutely necessary .
 

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
40,893
California
Don't you dare throw that out lol, it's definitely fixable . Buy a 10 pack of replacements (below) or buy bell caps .

$3.30 Replacement Glass Tank for KangerTech SUBTANK Mini Clearomizer (10-Pack) at FastTech - Worldwide Free Shipping

Rule # 1 , do not change Subtank O rings unless absolutely necessary .

I wish I would've asked here first! It was totally unnecessary when I changed them, I just wanted the pink o-rings. I was kicking myself after doing so. Thanks for the link!


Sent from my iPhone using Tapatalk
 

corn flakes

Ultra Member
ECF Veteran
Verified Member
Dec 29, 2014
2,852
19,931
Brant County Canada
Wish I could cuss. I just dropped my brand new tank in the sink while rinsing it and broke the glass. I'm upset because when I've changed the glass in the past (putting on more colorful o rings), the seal is never the same. There goes $18 literally down the drain :(


Sent from my iPhone using Tapatalk
16acf7d61d98a4664a48d1fd8259b9e1.jpg

Oops is a four letter word.

Don't you dare throw that out lol, it's definitely fixable . Buy a 10 pack of replacements (below) or buy bell caps .

$3.30 Replacement Glass Tank for KangerTech SUBTANK Mini Clearomizer (10-Pack) at FastTech - Worldwide Free Shipping

Rule # 1 , do not change Subtank O rings unless absolutely necessary .

Didn't know about not changing o'rings. Thanks
 

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
40,893
California

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
Btw, that's a great deal for TEN of them. I just ordered!


Sent from my iPhone using Tapatalk

Tell me about it , with what most retailers charge for just a single replacement glass it's a steal.
 

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
40,893
California
Oops is a four letter word.



Didn't know about not changing o'rings. Thanks

You can say that again. Big oops! Funny, I ordered 2 STMs from 2 different places. The other one was only $13 shipped! I'll be way more careful with that one.
I also need to stop opening and playing with every new thing I get and just stick it in the stash pile!


Sent from my iPhone using Tapatalk
 

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
Oops is a four letter word.



Didn't know about not changing o'rings. Thanks

Well i have also experienced issues when trying to keep the O rings in place after changing them , it's not the top one it's the O ring thats sitting on the base that keeps falling off .
 

RainSong

An adult who likes flavors.
ECF Veteran
Verified Member
Sep 11, 2016
2,018
12,492
47
Tempe, Arizona, United States
Do you all wash every brand new tank or just clones? I ask because the STM came with the stock coil already installed and when I bought a tank at a B&M last August, they didn't say anything about washing it. Now, my new tank is currently having a bath, but it just got me thinking


Sent from my iPhone using Tapatalk
Everything new, not just vaping related, if I can wash it I do.
 

ChelsB

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2016
7,848
40,893
California
Well i have also experienced issues when trying to keep the O rings in place after changing them , it's not the top one it's the O ring thats sitting on the base that keeps falling off .

That's right, it IS the bottom o ring. Well, then I should be ok as the base is intact! Yay!

Wish me luck that I don't slice my finger attempting to get the broken glass off!
Sent from my iPhone using Tapatalk
 

Users who are viewing this thread