Tootle Puffers, Part Three! (The Sequel of the Redux)

[ToolmanTexas]

Now I just whip whatever out.

So to speak.

Roll snare.

 

[DPLongo22]

puffers of toots....question for the tinkerers (is that a real word?)

anyone know where to get metric screws? I'd like a kit, with different sizes, in different lengths. preferably brass, but I'd take stainless too. NOT hex. Phillips or Flat head.

Here you go, PT>

Hard to Find Metric Fasteners and Metric Screws with No Minimums

 

[DPLongo22]

Will this work:
https://www.amazon.com/475pcs-Metri...28&sr=8-1&keywords=metric+screws+philips+head

If not, lots of other options on Amazon and if you have Prime then free ship on many.
https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=mertic+screws+philips+head&rh=i:aps,k:mertic+screws+philips+head

Even better!

for Da 'Zon.

 

[HappyCamper]

That looks awesome with that KFMV3 with white drip tip!

Congrats and a great device.

Thank you!! I have the biggest smile right now, she's so darn purdy

 

[DPLongo22]

It arrived today!!! So pretty
A special surprise in the box... it came in a Provape box and extension cap!
View attachment 656775 View attachment 656777

BEAUTIFUL!!!

 

[sorrynomore]

...I get the impression the little tiny screws and orings that we use are hard to find except online. They're smaller than the more commonly used stuff. I could be wrong, of course...

I've not had any luck finding screws for atomizers in the few hardare stores in this neck of the woods.I did find a O ring kit (300 assorted sizes)in a hardware store that's been very useful on my vaping journey.

Haven't had occasion to try, but I've read that a hobby shop catering to RC devices may be a good source.

I'd definitely think a hobby shop would be a good resource for stuff we'd need.

 

[HappyCamper]

Is that the powdercoat? Hard to tell from the picture.

Yes it is, just like my purple that must be 5-ish years old now (still works). Very smooth finish.
By the way, I dropped my purple hard on concrete in 2014, it got the teeniest scratch, you can barely notice it.

 

[HappyCamper]

BEAUTIFUL!!!

Thank you!!!

 

[HappyCamper]

Nice looking set up!


Sent from my iPhone using Tapatalk

Thanks

 

[The Ocelot]

puffers of toots....question for the tinkerers (is that a real word?)

anyone know where to get metric screws? I'd like a kit, with different sizes, in different lengths. preferably brass, but I'd take stainless too. NOT hex. Phillips or Flat head.

Like this? Metric Machine Screws | Metric Fasteners | Mr. Metric

ETA: Oops! I posted before I saw that others already had - and with much better suggestions.

 

[The Ocelot]

Is that the powdercoat? Hard to tell from the picture.

Yes it is, just like my purple that must be 5-ish years old now (still works). Very smooth finish.
By the way, I dropped my purple hard on concrete in 2014, it got the teeniest scratch, you can barely notice it.

Cough...(CeraKote)...Cough

 

[h00ligan]

I much prefer horizontal coils with wicks exposed to the fluid (such as the CLR coil, or even the aged Kanger Evod/Protank coil) as they just perform consistently whereas vertical coils may outperform horizontals initially but their performance deteriorates fairly quickly.

Couldn't agree more. I actually have an old emow mega I still use. They continued to improve coils for that tank. There must have been ten different types you can get. I found one using organic cotton hat outputs a good amount of vapor and flavor is great. I could use that tank on other hints but for now it's my cbd device for when I get headaches or for my back pain. (I don't want to spark a cbd debate). So I'm happy still using the OLD horizontal coils.

 

[HappyCamper]

Cough...(CeraKote)...Cough

oopsie, lol

 

[ToolmanTexas]

Thank you!! I have the biggest smile right now, she's so darn purdy

Yeah, the mini and KFMV3 were born to be together! She really is stunning, you should take her out for a night on the town

 

[jaytex1969]

My Google-Fu must be off today.

Anyone know of a good source for Lemo replacement parts, especially the o-rings for the glass? Also, maybe an insulator?

Thanks for the help!


Jay

 

[HappyCamper]

Yeah, the mini and KFMV3 were born to be together! She really is stunning, you should take her out for a night on the town

I would but there is a ton of yard work that needs to be done. I've been procrastinating all day
hahaha. Thank you

 

[ToolmanTexas]

I would but there is a ton of yard work that needs to be done. I've been procrastinating all day
hahaha. Thank you

Oh, she won't be happy!!

 

[DingerCPA]

Cough...(CeraKote)...Cough

Ossie - WOOT! Good to see you

 

[The Ocelot]

My Google-Fu must be off today.

Anyone know of a good source for Lemo replacement parts, especially the o-rings for the glass? Also, maybe an insulator?

Thanks for the help!


Jay

Lemo - Atomizer
Lemo Replacement Parts
There's a bunch of stuff on this site, but I can't get the cart to load. It might be for wholesale accounts only. O-rings - Vapour Smok-e Wholesale

 

[Bea-FL]

Cough...(CeraKote)...Cough

Ok now I'm really confused. Miss TO correct me here please. Ps came in two coats. The flat non-shiny called powdercoat, and the shiny, heavier coat called cerakote. Right? Wrong?