Skold, I hope you always feel free to ask about terminology! There IS so much of it, and not all of us know every single thing. It's helpful to others who might be too shy to ask.
I always ask yeahSkold, I hope you always feel free to ask about terminology! There IS so much of it, and not all of us know every single thing. It's helpful to others who might be too shy to ask.
That I really understand! I have my basic 28g 2.5 mm ID 6-7 wraps as the base line. Most of the truly outlandish wires and coils require much too much power to be practical in a single battery mod....unless you're using a car battery or something like it.I just get frustrated cos some stuff is alien to me, I know enough to build and actually have a couple mechs but there's just some terms I've not heard of.
There's that many different builds I've just not tried!
RS, I did hear from someone who had been using their Doggy for about 4 months and the threads on their tank went belly up... So 2 things out of that IMO, be gentle when threading on the base and get a good supply of those cheap replacement tanks on FT.I like the looks of that but I can't bring myself to buy anything without an rba. I'm still loving on my doggy, plan on ordering more. I can't use my stainless steel Ming with it, it gets hot, and I still wish it was glass instead of acrylic. Despite those it's moved up to be my most used tank. I need to go over all mine and hubbys tanks for maintenance and upkeep before we go out of town.
Now,folks, these are words to live by!good supply of those cheap replacement tanks on FT.
I got some pre built coils that just need wicking, I'm not bothering with wraps or anything!That I really understand! I have my basic 28g 2.5 mm ID 6-7 wraps as the base line. Most of the truly outlandish wires and coils require much too much power to be practical in a single battery mod....unless you're using a car battery or something like it.
I normally build to 0.2 with a mech but I know what I'm doing anyway, I have researched many years. I've just got the coil master too so I have everything to start. Also ordered some rayon, I wanna see what the hypes about. No dry hits?! Huge positive & heard it's healthier than cotton, it was also cheaper! I'll let you know how I get on![]()
Ok, here is a new MTL clearomizer that is incredibly small (TPD compliant):
$24.00 Authentic Hotcig SMART Tank Clearomizer - 2ml / 1.2/1.8ohm / stainless steel + glass / 22 diameter at FastTech - Worldwide Free Shipping
My new toy comes with a tiny tank like that which takes aspire nautilus coils.
Well you have the coilmaster kit. Now you can bother!I got some pre built coils that just need wicking, I'm not bothering with wraps or anything!
Just be careful. There is, as with anything , no substitute for experience and using a tank made for a regulated mod on a mech without the right 520 can spell disaster. I'm sure you have it all in check but just remember that not every tank is meant for mech use. Particularly things without adjustable 510.
That looks very interesting to me. Do you have one yet? I wonder how available the coils will be. I probably should have held off on the second Nicolas tank and tried some,thing else
I really hope that case isn't leather. Because if it's leather and from China and cheap it's probably dog.
That's a really neat kit. I wicker how long do the batteries last at say fourteen watts?
Well you have the coilmaster kit. Now you can bother!
I ordered two of the skyline clones from coppervape. I know there's split feelings on clone sin this thread but in this case I just don't have the money for the authentic nor can I get one anyway. So I did it. I haven't ordered a clone in a while now. So I don't feel too bad.
On. A personal note I confirmed today that my ex of 10 years was having an affair for at least he last year of our relationship. So that was suspicions confirmed but still a kick to the nether region. I flat out tried to ask to her about it while it was going on too. Suggesting we split. She swore nothing was happening. Why would you do that? Then when I flat out caught (by my standards) her I ended it. But it was never truly confirmed and she's been maintaining I was paranoid. Well. Good news is my lie detector isn't broken. I'll be trusting it more in the future.
Effing relationships.
---
I wear my typos like the badge of honor they are. Then I try to go back and fix them, so refresh.![]()
I know what I am doing don't worry, & yeah loving the coil master kit. Just has everything an was quite cheap!Just be careful. There is, as with anything , no substitute for experience and using a tank made for a regulated mod on a mech without the right 520 can spell disaster. I'm sure you have it all in check but just remember that not every tank is meant for mech use. Particularly things without adjustable 510.
That looks very interesting to me. Do you have one yet? I wonder how available the coils will be. I probably should have held off on the second Nicolas tank and tried some,thing else
I really hope that case isn't leather. Because if it's leather and from China and cheap it's probably dog.
That's a really neat kit. I wicker how long do the batteries last at say fourteen watts?
Well you have the coilmaster kit. Now you can bother!
I ordered two of the skyline clones from coppervape. I know there's split feelings on clone sin this thread but in this case I just don't have the money for the authentic nor can I get one anyway. So I did it. I haven't ordered a clone in a while now. So I don't feel too bad.
On. A personal note I confirmed today that my ex of 10 years was having an affair for at least he last year of our relationship. So that was suspicions confirmed but still a kick to the nether region. I flat out tried to ask to her about it while it was going on too. Suggesting we split. She swore nothing was happening. Why would you do that? Then when I flat out caught (by my standards) her I ended it. But it was never truly confirmed and she's been maintaining I was paranoid. Well. Good news is my lie detector isn't broken. I'll be trusting it more in the future.
Effing relationships.
---
I wear my typos like the badge of honor they are. Then I try to go back and fix them, so refresh.![]()
Ok, here is a new MTL clearomizer that is incredibly small (TPD compliant):
$24.00 Authentic Hotcig SMART Tank Clearomizer - 2ml / 1.2/1.8ohm / stainless steel + glass / 22 diameter at FastTech - Worldwide Free Shipping
I like the looks of that but I can't bring myself to buy anything without an rba. ...
From the looks of the coil's bottom, it would seem to let quite a bit of air thru. Unless the 1.8 ohm coil has a small diameter coil inside, this would be a no go for me, besides I'm happy with the Hussar for now.
The Nautilus got me off the stinkies when I quit for 3 years & no tank has satisfied me as much as this! I primarily use a cleito now but the Nautilus was my favourite tank for 3 years so I don't think I'd prefer this. The only thing that's come close for flavour to me is the Kayfun lite which reminds me I must get one!I have had one for a month or so, and I bought 5 replacement 1.2Ω coils. It is a great little tank, with good flavour, throat hit and vapour (although you can always alter these properties with juice profile) and better than the nauty (IMO). I haven't tried the 1.8Ω coil as yet.
It has a 3ø hole through the 1.2Ω coil with smooth tapers both ends of the coil body so air flow is sped up through the coil. The AFC can close the air flow right down so you feel you are sucking a golf ball through a straw if that's what you like
You can easily rebuild this coil vertically, I did it in about 2 minutes (although I used a 2ø coil the first time, which meant I couldn't get enough air through it and went back to a 3ø coil) although the very outer layer of cotton would appear to be very difficult to replace ... I didn't try to, I just replaced the cotton that you wrap around the coil.
My daughter currently has it on a Pico 75W I lent her to see whether it is suitable for those that take fairy puffs.
Thank you for the impromptu review! It is much appreciated.I have had one for a month or so, and I bought 5 replacement 1.2Ω coils. It is a great little tank, with good flavour, throat hit and vapour (although you can always alter these properties with juice profile) and better than the nauty (IMO). I haven't tried the 1.8Ω coil as yet.
It has a 3ø hole through the 1.2Ω coil with smooth tapers both ends of the coil body so air flow is sped up through the coil. The AFC can close the air flow right down so you feel you are sucking a golf ball through a straw if that's what you like
You can easily rebuild this coil vertically, I did it in about 2 minutes (although I used a 2ø coil the first time, which meant I couldn't get enough air through it and went back to a 3ø coil) although the very outer layer of cotton would appear to be very difficult to replace ... I didn't try to, I just replaced the cotton that you wrap around the coil.
My daughter currently has it on a Pico 75W I lent her to see whether it is suitable for those that take fairy puffs.
The Nautilus got me off the stinkies when I quit for 3 years & no tank has satisfied me as much as this! I primarily use a cleito now but the Nautilus was my favourite tank for 3 years so I don't think I'd prefer this. The only thing that's come close for flavour to me is the Kayfun lite which reminds me I must get one!
However since the cleito I really am leaning towards sub ohm, it performs really well with the tesla nano at 60 watts.
Actually just as flavourful as the Nautilus mini I think so I don't always think mtl has more flavour!
I'll always recommend the cleito for stock coils an am proud to say my current set up has nearly got me off stinkies.
Since the tesla nano & cleito combo I've only had 3 cigarettes since weekend yay.
Nearly there![]()
Thats tge full size. If neniry serves it holds 3 ml. On another forum someone said they held 3.3.This is she. It's listed at 4ml, but I sincerely doubt that by the size of it.
View attachment 664077
I liked the PT2 and Evod. The PT3 WAS garbage!Was never a pro tank fan, thought they were garbage![]()
Hard to say since I've been running it around 6W. Also, the Aspire battery it came with seems pretty... um... subpar. It says 1300mah but I'd be surprised if it's even 800mah. My iTaste VV v3 seems to have better life. Gotta order some more batteries.That's a really neat kit. I wicker how long do the batteries last at say fourteen watts?
People quit with sub ohm, just the same as people quit with mtl. You can't just recommend mtl for someone to quit, I think they need both options giving to them. I don't think being strictly mtl would particularly give me success no. I am much more satisfied off the cleito atm!Since the nicotine is os low with sub ohm and it's a foreign draw process. Do you think if you went back to high mg mtl you'd have more success like the first time? I cringe every time I see someone walk isn't a vape shop and say they want to quit smoking and the first recommendation is a smok alien kit or similar.
I didn't smoke for four years. I bought a pack a couple months ago and have smoked like four of them. If that. It's actually quite nice to be able to have one every once in a great while without feeling like I need to smoke a pack. It shot a trend I feel I'll continue but I am pleased at the fact I've not felt many desire to smoke really. Though I have enjoyed a couple here and there.
I'm not a big fan of telling people to get sub ohm setups when they're quitting smoking. I actually feel it's not the right kind of setup. My thoughts are replicate smoking as much as possible.
I really divide ecigs into two factions.
Smoking cessation and vaping. For quitters i really try to steer most to something g simple and mtl. Like icare go or juul or cync. Something to jus they then very basically started. If someone had told me to sub ohm when I was quitting smoking I never god have taken to vaping. But everyone seems to assume sub homing is the only way to vape these days. They forget what smoking is like I think.
---
I wear my typos like the badge of honor they are. Then I try to go back and fix them, so refresh.![]()
Give me 8 wraps with 26 gauge kanthal 2 mm diameter and im happy. A .77-.8 ohm coil i can. Happily tootle along at 8-10 Watts as long as its a flavor chasing rta sucg as my Kompact Kayfun or Silverplay Nano. Yes i use a dual coil atty in single coil mode. I plug the extra juice wells witg small pack of Rayon.That I really understand! I have my basic 28g 2.5 mm ID 6-7 wraps as the base line. Most of the truly outlandish wires and coils require much too much power to be practical in a single battery mod....unless you're using a car battery or something like it.