Tootle Puffers, Part Three! (The Sequel of the Redux)

[listopencil]

I hear ya buddy ......... Man, that is a very good price for TC coils! Yep, my old 70W IPV2 is my go to mod as it will cover the entire range......... Only problem is that it is not a TC mod because when I got the thing, TC was just starting to appear on the market...

I want to get a similar mod to the IPV2 but only one that supports TC ............ I want to keep my temp low due to all the negative reports about carcinogens at high temps.

I am liking the pipe. The options are quite an upgrade from my old Sigelei box. Even though shipping was a bit of a nightmare compared to what I am used to I got the thing for a little under $20 from China. It does VW/bypass/TC (N/SS/Ti) and lets you set your TCR for TC if you want in three different memory slots. And it has the fun little logo feature. MVS was out of the TC coils and told me that they don't plan to stock them anymore. I found them very cheaply somewhere else. Could be a bad sign. Could be that the coils are going to end up discontinued and the second company was clearing inventory.

 

[Two_Bears]

What did I do now?

Regardless, I categorically deny it.



(sigh)

The Rayonatti are almost as bad as those Provarinatti...



Ya, I would.



(sigh)

Matters of opinion, mind you. My opinion differs from your opinion, and in this case is one of the few that mine also differs from the TP OP (@Katdarling ).



Prezactly.

I prefer cotton. In many walks of life, now that I think about it. (bad me!)

Moving on. So, how's everyone's day?

We can agree to disagree.

You didn't do anything. Yoy were kinda scarce for a while.

 

[Two_Bears]

Sooooo...that means you are wrong then you know. Because every wise man knows that women are always right. Even when they are wrong.
Of course I've never been accused of being wise, so I'm wrong quite a bit.

Correct. The correct answer is"yes dear "

 

[Two_Bears]

I've heard that old times there are not forgotten.

When i lived ib Ky. I knew a guy who had a plate on the the front of his truck. An old confederate soldier with the stars and bars flag. Under neath the soldier was two words "Forget? HELL!"

 

[DPLongo22]

We can agree to disagree.

You didn't do anything. Yoy were kinda scarce for a while.

I pop in and out, just to see what's going on, and who the new players are.

And yes, we can. The beauty of the vape (all the options).

Marlboro, Winston, Newport & Kool never felt quite like this. This is MUCH better.

 

[leftyandsparky]

Good morning!

 

[leftyandsparky]

I have a question, I'm needing to order some o'rings. Since my tank is 22mm is that the width I would order? I need the thin ones so Im guessing 1mmx22mm?

 

[DavidOck]

Probably not, lefty. The o-ring will be a bit smaller so it can stretch to fit. A 22 mm o-ring would only be a light friction fit on the outside of the 22 mm tank.

Need to run down the specs on the particular tank in question.

 

[JCinFLA]

I'm needing to order some o'rings. Since my tank is 22mm is that the width I would order? I need the thin ones so Im guessing 1mmx22mm?

There are so many different sized o-rings for all the tanks, that sometimes vary just a tiny bit in size. So I usually order them specific to the tank they're for, so I get the absolutely right ones. Or...if I can find the specs for the o-rings for that tank, then I'll also look for them by size only.

 

[leftyandsparky]

There are so many different sized o-rings for all the tanks, that sometimes vary just a tiny bit in size. So I usually order them specific to the tank they're for, so I get the absolutely right ones. Or...if I can find the specs for the o-rings for that tank, then I'll also look for them by size only.

There is no specs for the nectar o rings, I'm wondering now if a 22mm o ring would stretch out to be too big now?

 

[leftyandsparky]

Probably not, lefty. The o-ring will be a bit smaller so it can stretch to fit. A 22 mm o-ring would only be a light friction fit on the outside of the 22 mm tank.

Need to run down the specs on the particular tank in question.

I might go with 21mm, was going to order from the o ring store

 

[Rickb119]

Speaking of o-rings, does anyone know the size of the Provari Radius o-ring for the positive pin?

 

[corn flakes]

Speaking of o-rings, does anyone know the size of the Provari Radius o-ring for the positive pin?

Yes I do.

Just have to look up what I bought.

 

[corn flakes]

004 Buna-N O-Ring, 90A Durometer, Round, Black, 5/64" ID, 13/64" OD, 1/16" Width


https://www.amazon.ca/gp/product/B0051XYL8S/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

 

[JCinFLA]

@leftyandsparky - Gearbest has the authentic Nectar on a Flash Sale right now:

Nectar Micro 4.5ml RDTA Atomizer -$9.47 Online Shopping| GearBest.com

That's the link to the Blue one. They also have Yellow for a slightly lower cost.

Maybe you could use their Live Chat and ask what size the o-rings are on it.

 

[leftyandsparky]

@leftyandsparky - Gearbest has the authentic Nectar on a Flash Sale right now:

Nectar Micro 4.5ml RDTA Atomizer -$9.47 Online Shopping| GearBest.com

That's the Blue one, the Yellow is at a slightly lower cost.

Maybe you could use their Live Chat and ask what size the o-rings are on it.

I have a bunch already that came as extras and when hubby gets home I'm going to get him to get his little tool he uses to measure them. ( toolbox is locked). I was just thinking I could place a order with just thinking and not measuring! Lol

 

[Two_Bears]

I have a question, I'm needing to order some o'rings. Since my tank is 22mm is that the width I would order? I need the thin ones so Im guessing 1mmx22mm?

Would be less because O rings are slightly snaller than outside diameter. If memory serves the O ring for Orchid is either 17 or 19 mm.

@ToolmanTexas THANK YOU! Thanks for telling about those screws for Kayfun deck.

Received them yesterday. Built the Kayfun with new screws. I was able to trap the first lead on the second try. A VAST improvement over the 10-15 tries it used to take.

 

[Rickb119]

004 Buna-N O-Ring, 90A Durometer, Round, Black, 5/64" ID, 13/64" OD, 1/16" Width


https://www.amazon.ca/gp/product/B0051XYL8S/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

Thank you!

Unfortunately, when I signed into my Amazon account it stated "This item does not ship to your selected location".

Fortunately, thanks to you for giving the size, and thanks to @leftyandsparky for mentioning the o-ring store (got it book marked now ), I ordered *plenty*

 

[ToolmanTexas]

Would be less because O rings are slightly snaller than outside diameter. If memory serves the O ring for Orchid is either 17 or 19 mm.

@ToolmanTexas THANK YOU! Thanks for telling about those screws for Kayfun deck.

Received them yesterday. Built the Kayfun with new screws. I was able to trap the first lead on the second try. A VAST improvement over the 10-15 tries it used to take.

W00t!!!

That is great news @Two_Bears... you get to keep vaping your beloved... that is absolutely fantastic, so happy those worked out good for your builds.

 

[Two_Bears]

W00t!!!

That is great news @Two_Bears... you get to keep vaping your beloved... that is absolutely fantastic, so happy those worked out good for your builds.

The deck screws the build was almost as easy to build as the doggy style and better flavor than the doggy.