Tootle Puffers, Part Three! (The Sequel of the Redux)

[barkfunklerbunk]

Tootlepuffing perfection. Dusted off the cobwebs and dust on my trusty Erl, forgot what I was missing.

Found this yesterday, I'm pretty sure if this rock vaped it would also be a tootlepuffer.

 

[DPLongo22]

Tootlepuffing perfection. Dusted off the cobwebs and dust on my trusty Erl, forgot what I was missing.View attachment 894451

Found this yesterday, I'm pretty sure if this rock vaped it would also be a tootlepuffer.
View attachment 894453

I'm APPALLED and AGHAST!!! Forgot the ERL????? How COULD you, Bark?

You need some juice in that bad boy!

 

[DavidOck]

He did, but it all leaked out

 

[Uncle]

He did, but it all leaked out

HEY ! ! ! Let's not get too personal here . . . Just Sayin' . . .


.

 

[Uncle]

It took me a minute...(LOL!).

Went over "My" head once again - Still haven't figured it out . . .



.

 

[DPLongo22]

Went over "My" head once again - Still haven't figured it out . . .



.

The ever astute Mr. @DavidOck was observing things over and above the relatively contained details of the subject (mod & box).

 

[Javichu]

Went over "My" head once again - Still haven't figured it out . . .



.

 

[JCinFLA]

I'm APPALLED and AGHAST!!! Forgot the ERL????? How COULD you, Bark?

Well then, you'll likely be even more appalled and aghast...that I have (2) Tobecco clone Erls and (2) authentic ones in the stash, and......I've never tried either one yet!

Went over "My" head once again - Still haven't figured it out . . .

David was referencing parts shown on the handgun graphic, in the foreground of the mat under DP's set-ups. One of my brothers is a longtime gun collector, or I wouldn't have known what he was talking about either.

 

[Uncle]

Okay - Current innokin in use with the New Karoma R . . .

Not the best picture - From left to right . . .

Karoma R / Cool Fire IV w/ Zenith / Adapt w/ Zlide / Endura T22 w/ Prism / Endura T18 w/ Prism

All have a "Rubber Tank Bumper"
(purchase/home made - need to get more color coordinated ones that match tanks too)
to avoid glass breaking when MOD is tipped over by accident
. . . SO Been There - Done That . . . ​

Anyway - I've used each tank on the Karoma R . . . And to be honest, other then adjusting the wattage a degree one way or the other - Absolutely no difference in taste . . . BTW: Very surprised how well the Prism Tanks worked on the Cool Fire/Adapt too . . . However, "Cloud" production is another story, as usual Zenith & Zlide are big producers - so as before got to adjust the inhale a little depending on which tank I am using . . . Still NEED to get a "matchy-matchy" tank though - I think the Zenith Gunmetal as @JCinFLA mentioned might be the one . . . Hopefully, I can find one - still would like to get a few more Zeniths . . . Just Sayin' . . .


NEW SHOPPING LIST:

1) 3-4 Zenith's, especially a "Gunmetal" or maybe even a couple of "Bronze" . . .

2) "Tank Rubber Bumpers" Black/Silver or a Variety of Primary colors (Remember Rubber bands don't look as good) . . .



BTW: Typing and posting pictures/images sure is a Huge PIA from a "Tablet" . . .


.

 

[DPLongo22]

Well then, you'll likely be even more appalled and aghast...that I have (2) Tobecco clone Erls and (2) authentic ones in the stash, and......I've never tried either one yet!



David was referencing parts shown on the handgun graphic, in the foreground of the mat under DP's set-ups. One of my brothers is a longtime gun collector, or I wouldn't have known what he was talking about either.

Re the Erls, Bark's not a casual owner, JC. Oh, no, no, NO! @barkfunklerbunk is a fanboi (much like myself). He's a true EXPERT in the arts of all that is Erlkonigin.

One may even say that he's a...

 

[DPLongo22]

Okay - Current Innokin in use with the New Karoma R . . .

Not the best picture - From left to right . . .

Karoma R / Cool Fire IV w/ Zenith / Adapt w/ Zlide / Endura T22 w/ Prism / Endura T18 w/ Prism

All have a "Rubber Tank Bumper"
(purchase/home made - need to get more color coordinated ones that match tanks too)
to avoid glass breaking when MOD is tipped over by accident
. . . SO Been There - Done That . . . ​

Anyway - I've used each tank on the Karoma R . . . And to be honest, other then adjusting the wattage a degree one way or the other - Absolutely no difference in taste . . . BTW: Very surprised how well the Prism Tanks worked on the Cool Fire/Adapt too . . . However, "Cloud" production is another story, as usual Zenith & Zlide are big producers - so as before got to adjust the inhale a little depending on which tank I am using . . . Still NEED to get a "matchy-matchy" tank though - I think the Zenith Gunmetal as @JCinFLA mentioned might be the one . . . Hopefully, I can find one - still would like to get a few more Zeniths . . . Just Sayin' . . .


NEW SHOPPING LIST:

1) 3-4 Zenith's, especially a "Gunmetal" or maybe even a couple of "Bronze" . . .

2) "Tank Rubber Bumpers" Black/Silver or a Variety of Primary colors (Remember Rubber bands don't look as good) . . .



BTW: Typing and posting pictures/images sure is a Huge PIA from a "Tablet" . . .


.

Lookin' pretty spiff*, there, Unc!!!



*Channeling @Katdarling in her absence.

 

[JCinFLA]

Still NEED to get a "matchy-matchy" tank though - I think the Zenith Gunmetal as @JCinFLA mentioned might be the one . . . Hopefully, I can fin one

Well, actually, I mentioned a Zlide in Gunmetal....because they don't make a Zenith in Gunmetal. Gunmetal Zlide's were available, but they're as scarce as hen's teeth apparently now, based on some searching I did. Several US vendors still have the Blue, SS, and/or Rainbow, but...didn't find any Gunmetal.

 

[JCinFLA]

Re the Erls, Bark's not a casual owner, JC. Oh, no, no, NO! @barkfunklerbunk is a fanboi (much like myself). He's a true EXPERT in the arts of all that is Erlkonigin.

Oh, I definitely knew that! He's mentioned in PM's in the past when discussing the Erls...that if I ever decide to sell 1 of the authentics...to please remember him!

 

[Redbird11]

Well, actually, I mentioned a Zlide in Gunmetal....because they don't make a Zenith in Gunmetal. Gunmetal Zlide's were available, but they're as scarce as hen's teeth apparently now, based on some searching I did. Several US vendors still have the Blue, SS, and/or Rainbow, but...didn't find any Gunmetal.

Misthub has the Zlide 2ml in gunmetal. Not sure if that is of any interest to anyone
Innokin Zlide Sub-Ohm Tank

 

[barkfunklerbunk]

Must.. acquire.. all.. Erlkönigin..

 

[JCinFLA]

I also just found the Gunmetal Zlide at 2 other places. RockBottomVapes.com is within pennies of Mist Hub's price, but I didn't check the S/H cost at either place. Element Vape has theirs priced at $23.99.
Don't know what was wrong with my Google-foo at 2:30AM...that none of them popped up then during searching!

 

[Uncle]

The ever astute Mr. @DavidOck was observing things over and above the relatively contained details of the subject (mod & box).

YES - The "Wise" one usually does, however I usually get his humour and observations - this time I just missed out . . . Well that I is until the "Savvy Vape Lady" (@JCinFLA ) spoke up noticing the details of your ever present "Placemat" again (seen it many times before just didn't put 2 and 2 together this time ) . . .

David was referencing parts shown in the handgun graphic in the foreground of the mat under DP's set-ups. One of my brothers is a longtime gun collector, or I wouldn't have known what he was talking about either.

Well, actually, I mentioned a Zlide in Gunmetal....because they don't make a Zenith in Gunmetal. Gunmetal Zlide's were available, but they're as scarce as hen's teeth apparently now, based on some searching I did. Several US vendors still have the Blue, SS, and/or Rainbow, but...didn't find any Gunmetal.

"TROUBLE MAKER" - "MEANY" . . . Ya' have the audacity to get "Me" all hyped up with the possibilities and then pull the rug out from under "Me" . . .

"TEASE" - Not Nice . . .

Misthub has the Zlide 2ml in gunmetal. Not sure if that is of any interest to anyone
Innokin Zlide Sub-Ohm Tank

THANK YOU ! ! ! !
And they even have the Zenith Pro in "Gunmetal" too . . .
( Anyone know if these are any good or as goo as the original Zenith . . . )

Innokin Zenith Pro Dual Airflow Tank

However, I can't purchase anything yet, well not until "My" Advisor chimes in with the lowest price and the sales she can find . . . Just Sayin' . . .


OKAY - "Savvy Vape Lady" @JCinFLA what Ya' say . . . Go No Go


.

 

[Redbird11]

I also just found the Gunmetal Zlide at 2 other places. RockBottomVapes.com is within pennies of Mist Hub's price, but I didn't check the S/H cost at either place. Element Vape has theirs priced at $23.99.
Don't know what was wrong with my Google-foo at 2:30AM...that none of them popped up then during searching!

I believe shipping is around 5 or 6 bucks for Misthub unless you spend 65 dollars. But MHBK15 gets you 15 percent off.

 

[Uncle]

AH - The "Savvy Vape Lady" has spoken - a Zlide "Gunmetal" is on the way . . .

Just Sayin' . . .


.

 

[Redbird11]

AH - The "Savvy Vape Lady" has spoken - a Zlide "Gunmetal" is on the way . . .

Just Sayin' . . .


.

Glad to hear you got one. Did you go through MistHub or somewhere else?