Uwell Crown

Status
Not open for further replies.

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
yes they were uwell. came in plastic case. some duds. some did not last long. others lasted like forever.. i think their qc is all over the place. which is the only real issue with chinese goods. when they are good they are good. lots of duds though in all manner of chinese goods. not hating on china that is their only issue. otherwise they are turning out great products nowadays.
 
  • Like
Reactions: BillW50

gwano

Full Member
Feb 12, 2016
8
4
40
I've had this tank for about a month and love it. But as of yesterday I can't stop getting juice in my mouth while vaping it. It started when I changed from the .5 cool and put in a .25. I primed it and now nothing I've tried will make it stop. I even put a new coil in thinking I primed the first one wrong or something, cleaned the whole tank and refilled but still spit back all day. I woke up this morning with like a sore tongue from it happening all day yesterday it sucks! Anyone know a fix or what I'm doing wrong?
 

BillW50

Vaping Master
ECF Veteran
Verified Member
Nov 23, 2014
3,429
34,381
US
That hissing sound you hear after you stop firing gwano, is completely normal. As the coil doesn't instantly drop to room temperature when you let up. As it is still hundreds of degrees hot for the first few seconds. And I hear that sound all of the time after I rewick my rebuildables or use a new stock coil.

I just rewicked this RBA I am vaping off of right now, just a day and a half ago. And it was doing that hissing thing in the beginning, but it isn't doing it now. I think they usually stop doing so after about 12 hours.
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
I've had this tank for about a month and love it. But as of yesterday I can't stop getting juice in my mouth while vaping it. It started when I changed from the .5 cool and put in a .25. I primed it and now nothing I've tried will make it stop. I even put a new coil in thinking I primed the first one wrong or something, cleaned the whole tank and refilled but still spit back all day. I woke up this morning with like a sore tongue from it happening all day yesterday it sucks! Anyone know a fix or what I'm doing wrong?
Maybe an o-ring popped off.
I had problems with the upper large ring swelling and not sealing with some juices.
 

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
i wanted to inform you guys that a low restriction drip tip makes a major difference on this tank. only if you are really pushing it though. i am at 110w/530f on dna 200 devices. i go through juice like mad of course. i had a copa on here. it was very good compared to a jmk copper that is restricted. the copa is barely restricted. i like the design. not looks but functionality. then i just found my bag of justhatip competition tips i had been looking for. these have zero restriction as far as a 510 goes. not at all a chuff but still good. i put one on. it made a huge difference at my settings. if you are at 30-40 watts no need to bother. i suggest if you are around my settings you get something all acrylic/trustone. this will get very hot. the copa tip is glass so fine too as far as heat. i would not buy a premade one because they are $10 more at least. design the one you like and they will get it to you in about a week, you may need them to shorten the tank side a drop, ask them. mine are shortened because i used them with subtanks back in the day. those do not have a full depth 510 receptacle. i am not sure about the crown but my slightly shortened ones work fine. so if you do go that route might as well ask for a sliver shaved off rather than be disappointed. i have absolutely no affilation with them. i am just saying if you push it as hard as i do zero restriction is obviously going to help. it certainly did indeed. glad i found that bag. one caveat these are $28+ tips plus shipping. still not nearly as expensive as some others out there. i was actually very surprised the difference it made over the copa because that itself is barely restricted. you can see like when you look at a jmk/standard 510 tip it has a much smaller hole than the chimney in our tanks. i hope this helps someone.
 
  • Like
Reactions: Mowgli

Tpat591

Ultra Member
ECF Veteran
Verified Member
Jul 28, 2014
2,728
9,711
RB nj
i wanted to inform you guys that a low restriction drip tip makes a major difference on this tank. only if you are really pushing it though. i am at 110w/530f on dna 200 devices. i go through juice like mad of course. i had a copa on here. it was very good compared to a jmk copper that is restricted. the copa is barely restricted. i like the design. not looks but functionality. then i just found my bag of justhatip competition tips i had been looking for. these have zero restriction as far as a 510 goes. not at all a chuff but still good. i put one on. it made a huge difference at my settings. if you are at 30-40 watts no need to bother. i suggest if you are around my settings you get something all acrylic/trustone. this will get very hot. the copa tip is glass so fine too as far as heat. i would not buy a premade one because they are $10 more at least. design the one you like and they will get it to you in about a week, you may need them to shorten the tank side a drop, ask them. mine are shortened because i used them with subtanks back in the day. those do not have a full depth 510 receptacle. i am not sure about the crown but my slightly shortened ones work fine. so if you do go that route might as well ask for a sliver shaved off rather than be disappointed. i have absolutely no affilation with them. i am just saying if you push it as hard as i do zero restriction is obviously going to help. it certainly did indeed. glad i found that bag. one caveat these are $28+ tips plus shipping. still not nearly as expensive as some others out there. i was actually very surprised the difference it made over the copa because that itself is barely restricted. you can see like when you look at a jmk/standard 510 tip it has a much smaller hole than the chimney in our tanks. i hope this helps someone.
Hats off to you. If I has $28 to spend, I might buy another whole crown cheaper before a drip tip like that.
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
Half Moon Mods will release their Super Shorty tips soon if they haven't already.
Nick Bessette from Daily Vape TV showed one on The Game Of Awesome show Friday night.
I just had this conversation with him and he gave me permission to share it.
I have no affiliation with HMM etc yada yada

It looks like it might be pretty hot and damn short but they make awesome tips so I'll try one if they're $15 like their regular tips.

12592574_1762764817287674_3453231172336805904_n.jpg

12923253_1762764920620997_7725713077956770956_n.jpg


12417877_1762764717287684_66255224201867692_n.jpg
 

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
another frivolous thing. they now have pretty acrylic to replace the glass on these. these are very popular. i see everyone vaping them. i did not know if you put escribe in temp mode for the ss coils? are uwell's coils meant to be used that way? thanks.

that tip looks fantastic! what is their method of keeping it full bore? justhatip is friction no o-rings so it is much wider all the way through. i understand they are expensive but it made a huge difference even over the copa. which is very wide to begin with. anything with o-rings should make it a bit smaller i think. could be wrong. i just want the best vape i can get. although $15 is a more reasonable price for a tip. of course this is ymmv. maybe it makes no diifference to anyone else. please do not buy anything and then get mad at me if it does not suit you.
 
  • Like
Reactions: BillW50

nic_fix

Account closed on request
ECF Veteran
Oct 16, 2013
1,186
756
USA
i have a real nice acrylic barrel for this. was going to install it. the metal on the glass was seized. i used two needle nose pliers to unscrew it of course. it was on so tight the glass flew all over the room! acrylic barrel is on now. it is all i will use now but luckily uwell gives us another glass! the rig i am vaping right now looks sweet. if y'all want a pic i can oblige. just let me know. i don't know why but i just figured i would share that story. i often have taken a pliers to the base when seized. great coating. never a scratch. which is pretty amazing actually. unfortunately the glass assembly just could not take the torque. the small pliers hit the side of the glass and as quartz often does it exploded. no biggie.
 

erikbal

Ultra Member
ECF Veteran
Oct 31, 2013
2,130
1,080
Olean, NY
Just wondering what you guys with the .25 dual coil are running for wattage? I just recently upgraded to a crown on top of a rx200. I've been running it around 50-55 w. A friend of mine just got a crown for himself and he says he's running it between 90 and 100. I tried a hit of mine at 80 and it was pretty burnt. What gives? Running 70vg juice.

Sent from my VS980 4G using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread