Vandy Vape BERSERKER (24mm) MTL RTA

[ogie56]

just got mine 2 hours ago, machining is very good,no machine oil film just did a quick hot rinse. be careful if your going to use the 4 ml setup there's a little o ring that goes on the top and it's laying loose along side the 4 ml chimney in the box. perfect mtl on biggest hole. if you try to vape without firing it will suck up extra juice easy. chain vaping will get a little warm, I'm using a kathanal 28 2.5 1.4 ohm coil with cotton with 70vg/30pg plain diy juice. ready to order another

 

[G and C]

Mine shipped today, says the PO will have it here by Wednesday! Can't wait!

 

[skyboxer1968]

ECF discussion :
https://www.e-cigarette-forum.com/forum/index.php?threads/825943/

FT link :

https://fs.tc/p/8803500

Spotted this mod from ijoy that takes upto 26mm tanks without overhang.

Also supports various batteries : 21700, 20700 & 18650

Sent from my ONEPLUS A3003 using Tapatalk

I ordered this: voopoo newbie

https://fs.tc/search?voopoo+newbie

If they actually send it, and if it arrives, and if it doesn't suck (voopoo stuff has been good so far), I'll order a beserker stateside to put on it.

Sent from my XT1650 using Tapatalk

 

[ricks]

I messaged the store about mine and they say mine was shipped.

 

[green.on.green]

I ordered this: voopoo newbie

https://fs.tc/search?voopoo+newbie

If they actually send it, and if it arrives, and if it doesn't suck (voopoo stuff has been good so far), I'll order a beserker stateside to put on it.

Sent from my XT1650 using Tapatalk

I have been eyeing the newbie as well.. but it seems it takes 22.5/23 mm (I forgot) atties without overhang .

I might be wrong though, I read up some Google translated Chinese reviews. But the translation wasn't great. Would love to hear your thoughts on when you receive it.

Sent from my ONEPLUS A3003 using Tapatalk

 

[ogie56]

watch out ! I got mine from eciggity and if you watch Phil's video he shows how the build deck comes apart by taking out the 510 pin then unscrewing the inside nut. well they either changed the design or I got ripped off because I went to take mine apart and all that comes out is a long 510 pin nothing else all press fitted. let me know if yours is that way.

 

[ogie56]

well after further inspection the post does come out if you use your tweezers or needle nose pliers and pull up. how ever the threading for the 510 is real bad so be careful tightening the 510 pin,also had metal shavings in there to clean out. looks like this will be a base leaker in a short time period. not going to get another one until maybe a better version comes out . it really needed a jfc

 

[ogie56]

just checked my spare parts bag and it didn't include an extra bottom glass gasket-o-ring and no extra 510 pin

 

[green.on.green]

just checked my spare parts bag and it didn't include an extra bottom glass gasket-o-ring and no extra 510 pin

Where did you purchase your tank from?

Seems like you received a bad batch.... Bummer

Sent from my ONEPLUS A3003 using Tapatalk

 

[chief63]

in stock at MVS

 

[Sed8op8]

So after a couple of builds and going back and forth between chimneys I have noticed I get significantly better flavor and throat hit with the larger chimney which really it should be the opposite however I think the shape of the larger chimney is at least partially responsible. I am getting a stellar freaking vape guys. As others have mentioned if you are not quick and leave the cap off for awhile while refilling the loss of vacuum causes it to get a TINY bit gurgly but if you wick it right it is hardly any annoyance (at least for me) and I really don't feel the need for JFC but hey that's just me though and goes away after a pull or two. I'm currently using one of the supplied coils which is ohming out to 0.67 and I'm vaping it at 16w and finally mixed up some 18mg 50/50 pg/vg juice and it's heavenly....!

P.s.
Build quality on mine seems really good and the threads are extremely smooth so I'm not sure if I got lucky or if that's the norm

 

[VaPreis]

I think I ordered the last SS version from Origin. Couldn't stand the wait on VaporL anymore. I guess (hopefully) I'll have a spare in the end. I think this tank is going to be great sitting on my new Aegis.

Got shot down. LOL! Origin emailed me to say they had an inventory glitch, and my order won't ship until next week.....so the wait continues....for two of them.

 

[jefsview]

in stock at MVS

Damn you!!!

I couldn't pass up that price -- so I ordered 2!

The black and a stainless, since they were the same price. Even with shipping added, it was less than the item price for the same item at other US stores [so far].

 

[Carnage9270]

The warning message on the back gives me a chuckle....oh China...

"Keep the contents of this package out of reach of children, non smokers and animals"

 

[Carnage9270]

I think my wife considers me all three of those...

 

[ogie56]

update: OK after further inspection that long 510 pin is actually both the inside nut and 510 pin but the problem is there stuck together. so i changed my coil to 1.0 ohm 2.5 28 gauge kath. , changed my juice to 20/80 vg now it does not gurgle or flood accept a little and i just blow into the tip and it clears up instantly. flavor is very good,so now don't need to shut the air flow between vapes. easy to build on, but I got shorted my extra 510 and bottom glass o-ring

 

[stols001]

So only dual users can use this mod? LOL, it looks great, but not so great that I'd take up smoking again to get my hands on it.

I used to love some of the Chinese instruction manuals, I would read them for the Fun Excitement of placing the "Peg inside the washer lug nut chain don't loosen..." and watching my parents fight over what it could possibly mean was even better. There was one time, this Bookshelf.... by the end, books were *flying* around the room, my parents really knew how to *argue* .

Anna

 

[Jim-]

well after further inspection the post does come out if you use your tweezers or needle nose pliers and pull up. how ever the threading for the 510 is real bad so be careful tightening the 510 pin,also had metal shavings in there to clean out. looks like this will be a base leaker in a short time period. not going to get another one until maybe a better version comes out . it really needed a jfc

just checked my spare parts bag and it didn't include an extra bottom glass gasket-o-ring and no extra 510 pin

So that's why mine came with 2 sets of o-rings and 2 spare 510 pins.... (seriously).

 

[ricks]

So that's why mine came with 2 sets of o-rings and 2 spare 510 pins.... (seriously).

That's messed up.

 

[ogie56]

So that's why mine came with 2 sets of o-rings and 2 spare 510 pins.... (seriously).

give me my o-rings !!! just kidding