Vandy Vape BERSERKER (24mm) MTL RTA

[traianescu]

What a pitty, the tube mod, ehpro mod 101 is only 22mm.. with a short battery like aspire 18350 (1300mah)
I dont know, does exist any adapter 24 to 22 mm ?


Cheap mods, compatible with artic fox firmware (poor version dna )are pico 25, evic primo mini se, wismec sinuous p80.. silver or black version
I have a geek vape aegis.. 26650 batt (4300 mah), but it is large.. only a few mm smaller than a dual batt

 

[stols001]

I was into the geekvape a lot, it looked good for one such as me, but I already own some mods it will fit on, so I'm not too worried.... I don't know if there is some sort of adaptor that might work, I'm very bad at accessories, LOL. Good luck!

Anna

 

[BulletStopper]

Here is mine on my Lavabox M, DNA 75. There is a slight overhang on the front. I recently purchased it for $40.

Sent from my iPhone using Tapatalk

 

[G and C]

Does anyone have any suggestions on what mod would look good with the ss version? Picking one up next week but don't have a mod that fits 24mm atties.

I'm pretty happy with how mine looks on my iStick TC60w. It's the chrome version and there's no overhang on any side of it.

 

[Cosmic_Glaze]

Do you have a pic of your finished work? Just curious... I'm still waiting for mine from China. I'm hoping it isn't lost also because I ordered it back on August 27th...

When do they say it's gonna arrive for you? I remember our conversation about you getting it, and I think I was one of the many enabelers and said YES, you should get it! ( but, don't we all) .... thought you were one of the few to jump on this first... really wanted to hear your view on it, but... damn this thing looked so great I could not wait..... had too order it..

 

[Cosmic_Glaze]

What a pitty, the tube mod, ehpro mod 101 is only 22mm.. with a short battery like aspire 18350 (1300mah)
I dont know, does exist any adapter 24 to 22 mm ?


Cheap mods, compatible with artic fox firmware (poor version dna )are pico 25, evic primo mini se, wismec sinuous p80.. silver or black version
I have a geek vape aegis.. 26650 batt (4300 mah), but it is large.. only a few mm smaller than a dual batt

You found an 18350 with 1300mah? Really?

 

[traianescu]

The aspire

 

[Cosmic_Glaze]

The aspire

It's been awhile since I saw 18350. Last time I checked...(Long time ago) many were below that Aspire.. that's good to know. Been looking for a good 18350 mech battery to throw on my Kayfun. I will definitely have to pick up that battery.

 

[lil_buddy]

This accommodates 24 mm and takes 18500
ALPHAFOX Mini Bolt 52w Mod - $28.99

There's a vaping with Vic review

 

[ricks]

When do they say it's gonna arrive for you? I remember our conversation about you getting it, and I think I was one of the many enabelers and said YES, you should get it! ( but, don't we all) .... thought you were one of the few to jump on this first... really wanted to hear your view on it, but... damn this thing looked so great I could not wait..... had too order it..

Yes it's all your fault! LoL

I'm still waiting for it and I think it's in the US now. The tracking said it was shipped early in September but it never left China until a week ago. It actually shows that it left China 2 times. This is just crazy and I think the website I ordered it from is the problem. I will never buy from them again. Sure I only paid $26 for it but I'm now regretting it with how long it's taking. I could get it any day now... How many times have I said that in here. LoL

Hearing all the good reports on it is driving me crazy! I was supposed to be one of the first ones to get it and it's turning out that I'll be the last...

The looks of it tells me it will be great. It sure would be nice to try it out!!! It better get here this week!

 

[Cosmic_Glaze]

Yes it's all your fault! LoL

I'm still waiting for it and I think it's in the US now. The tracking said it was shipped early in September but it never left China until a week ago. It actually shows that it left China 2 times. This is just crazy and I think the website I ordered it from is the problem. I will never buy from them again. Sure I only paid $26 for it but I'm now regretting it with how long it's taking. I could get it any day now... How many times have I said that in here. LoL

Hearing all the good reports on it is driving me crazy! I was supposed to be one of the first to get ones to get it and it's turning out that I'll be the last...

The looks of it tells me it will be great. It sure would be nice to try it out!!! It better get here this week!

Where did you order from? I ordered mine from Origin Vapes. But, I did pay more than you did though. Mine arrives tomorrow. Just got the news today. Don’t worry I didn’t forget about the rebuild mesh pics of the Nano. It definitely a plan on building it but might be slightly delayed due to the arrival of the Berserker.


Sent from my iPhone using Tapatalk

 

[ricks]

Where did you order from? I ordered mine from Origin Vapes. But, I did pay more than you did though. Mine arrives tomorrow. Just got the news today. Don’t worry I didn’t forget about the rebuild mesh pics of the Nano. It definitely a plan on building it but might be slightly delayed due to the arrival of the Berserker.


Sent from my iPhone using Tapatalk

I ordered from Sourcemore.com My first time I heard and ordered from them.

I'm hoping mine could be here tomorrow also. No hurry on the pics. I know you'll post it someday. We're not going anywhere.

 

[ian91]

I ordered my Sinuous from them. Took 63 days in shipping. FT normally gets here in 14 days. Definitely wouldn't recommend them!!!

 

[Cosmic_Glaze]

The Berserker arrived last night. Testing a few builds and the difference between the tall boy or the mini version. The coil they provided lasted about an hour. Not a fan. 28g in there now. Gonna play with 26g kanthal and 26g SS as well.

Too early to make judgement. Except if not wicked perfect. I agree with Phil and many others. Not having juice flow control is a bummer.
Well, it’s competition is my KF5 (with reducer kit installed) (JFC) I’ve had it for over a year as my #1 main everyday device. (Not my the only rta but it is the true test of a great eliquid)

Love the look of the Berserker. It fits on other mods that the “Tower” KF5 looks crazy on. Still playing with it.


Sent from my iPhone using Tapatalk

 

[soulseek]

I never close the JFC on my Skyline when refilling. Good wicking and simply turning it upside down works. Having said that my Berserker arrives tomorrow so I'm not sure if the same applies to it.

 

[VaPreis]

All tanks produce condensation down the mouth piece. I ignore all talk about that.

Not all tanks do this. Tanks with a ledge under the drip tip do this.

In fact, I kind of forgot that tanks do this at all until vaping my Berserker for awhile. It's not a huge problem on the Berserker, but I definitely get the occasional sip of spent e-liquid from it.

 

[benley73]

View attachment 688959

The Berserker arrived last night. Testing a few builds and the difference between the tall boy or the mini version. The coil they provided lasted about an hour. Not a fan. 28g in there now. Gonna play with 26g kanthal and 26g SS as well.

Too early to make judgement. Except if not wicked perfect. I agree with Phil and many others. Not having juice flow control is a bummer.
Well, it’s competition is my KF5 (with reducer kit installed) (JFC) I’ve had it for over a year as my #1 main everyday device. (Not my the only rta but it is the true test of a great eliquid)

Love the look of the Berserker. It fits on other mods that the “Tower” KF5 looks crazy on. Still playing with it.


Sent from my iPhone using Tapatalk

Have a look at the by KA V7 thats coming out , has JFC and many Airflow Options , 3ml can buy open chimney chambers and larger tanks too ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[Cosmic_Glaze]

I never close the JFC on my Skyline when refilling. Good wicking and simply turning it upside down works. Having said that my Berserker arrives tomorrow so I'm not sure if the same applies to it.

You will need to do that "upside down" technique / ritual for sure..
You do not need to do that method with JFC..

I must add that good wicking also is putting "just enough" in there resulting in a a fast wick.. having juice flow control is far superior on a tank because it allows that option.. no need to throw extra for it not to flood during a fill.

My KF5 has never leaked nor do I need to close the juice flow when it's in my pocket sideways.

The fact that it does not have juice flow control will make it flood if you build it like it did have juice flow control. I generally avoid RTAs that do not have JFC for that reason..plus the ability to build the same wick and not have to build it differently for vg% is plus. Just give it another twist, either way.

 

[Cosmic_Glaze]

JFC or not Still love the flavor on this tank and it looks great and the machining is awesome. My eyesight might be getting worse but I can barely see that obnoxious " state of wild fury" on the SS tank.. don't even know it's there.. for any others that were worrying about that.

 

[Cosmic_Glaze]

Have a look at the by KA V7 thats coming out , has JFC and many Airflow Options , 3ml can buy open chimney chambers and larger tanks too ,

Sent from my ONEPLUS A3003 using Tapatalk

I'll have to take a look at it.. the v6 looked nice... kinda got my eye on the "Prime" next.