The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

Vaping Issues

Discussion in 'New Members Forum' started by Zx_1989, Oct 29, 2013.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. Zx_1989

    Zx_1989 Full Member

    Oct 29, 2013
    Hi all,

    I'm relatively new to but haven't had much luck so far in terms of finding something I like. It seems as though any clearo or tank I use lacks vapor, flavor, TH, or a combination of those three. I've been trying the following since May:

    x2 clearomizer
    Smok trophy tank
    T3s (1.8 ohm)
    Vivi nova

    I've been using all on either an ego 650 or 950. Any advice for this newbie in terms of recommendation? I've been relatively unimpressed so far. I'm looking for something that doesn't require much finagling; while some enjoy that, I think that's one area where analogs have the upper hand.

    Your help is appreciated!

    Ps, I've been using liquids from smokeless image and pink spot (60% vg)
  2. Baditude

    Baditude ECF Guru ECF Veteran

    Apr 8, 2012
    Ridgeway, Ohio
    So far you have been limiting yourself to a fixed, single voltage battery with the ego battery. Advancing to variable voltage, whether with a Spinner or Twist ego battery, or a variable voltage mod may well be what you need.

    Variable voltage will allow you to adjust the voltage delivered to the juice attachment. This allows you to adjust the vapor to be warmer or cooler, and to adjust the voltage to each specific flavor you are using for better flavor. Not many flavors taste their best at a set 3.7 volts of power like you are currently doing.

    A dripping atomizer or bottom feeding mod often are described as providing the best flavor possible.

    Advancing up the vaping ladder with ego's & mods

    Proper Terminology: A Primer on Juice Attachments

    To experience the most vapor and a more powerful vaping experience, you would have to use the more advanced RBA/RDA juice attachments (rebuildable atomizers). RBA's require the use of a regulated (variable voltage) or mechanical (non-electric) mod which use replaceable, rechargeable batteries. They can be quite fiddly and time-consuming. You make your own coils and wicks. They do have quite a learning curve and require some self-learning before jumping in.

    Information resources for your first RBA
  3. slykyfox

    slykyfox Full Member Verified Member

    Oct 4, 2013
    My first step up from the ego starter battery, was a vision spinner. This made a noticeable difference, in ejuice flavor. Last week I purchased the itaste svd VV/VW, this made a huge difference. So Baditude has a good point, maybe start off with a VV spinner or twist battery, they can be purchased relatively cheap.

    Another thing too add, is some juices get better after you let them steep for about a week or so. I had a couple of flavors that had excellent reviews, but didn't taste good at all to me. I put them in the closet for about 1 week, and then tried them on my VV/VW apv, and it made a huge difference in the taste.
  4. JustinFacts

    JustinFacts Full Member

    I have yet to find something that doesnt require finagling. I use a protank which seems best for me (2.5ohm coil) and a VV battery. I have issues with it going from producing great vapor to barely any. I think a VV/VW battery might help, but so far nothing has.
  5. TastyKakes

    TastyKakes Super Member ECF Veteran

    Aug 30, 2013
    All very good suggestions, but a quicker and/or easier fix would be to first try out low res coils in the existing tanks you already have. A 1.5 or 1.8 coil head on a fixed 3.7 volt battery will be much more satisfying than the usual 2.5 ohm coils than come standard on most devices.
    I agree with said above 100% though if you plan on keeping at this vaping thing for any length of time. Even a low end vv/vw mod will drastically outperform the standard ego-type batts. I'm using a vamo v3, low end by most standards, and am loving the performance. I absolutely plan on upgrading in the near future, but a 2 ohm micro coil with cotton yarn wick atop my vamo at 10 watts has been treating me quite well.
    Good luck on you vaping adventure.
  6. 03FXDWG

    03FXDWG Super Member Verified Member ECF Veteran

    Jul 22, 2013
    East Central, Missouri
    I have been using eGo-C Twists with Kanger EVOD's & an original Protank for tank cracker juices with 1.8 ohm coils since day 1 (Thank you Bill's Magic Vapor!) and only have issues when it's time to clean which can be weeks on a new coil. I prefer 80/20 or 70/30 liquids and only the clear fruit & menthol types--no tobacco extracts or dark, sweet chocolate/coffee types. I can go weeks without even rinsing off a new coil. It took almost 90 days before one of my original EVOD coils quit producing vapor completely.
  7. Vapoor eyes er

    Vapoor eyes er ECF Guru ECF Veteran

    Sep 13, 2011
    Toronto, Ont.
    If you're using the eGo-T realize the voltage is 3.3 volts. Most eGo style PVs fires at 3.7 volts so I agree if they are eGo-T then the lack of voltage may be your issue.
    If it's an eGo-C I've heard they upgraded it to 3.7 volts but there are still some 3.3's floating around.
  8. wv2win

    wv2win ECF Guru ECF Veteran

    Feb 10, 2009
    GA by way of WV
    All good advice. I like the idea of switching to a variable watt model PV such as the iTaste V3, Vamo, Zmax, etc.

    But as far as the TH (throat hit) is concerned, you didn't mention what nicotine strength eliquid you are using. TH is provided mostly by nicotine. Most new vapers need their eliquid to be in the 16mg - 24mg range to get the TH that is closer to what they experienced with analogs. You may need to up the nic strength of your eliquid.

    Plus, more VG tends to mute both TH and flavor where as more PG allows more flavor and TH to come through.
Thread Status:
Not open for further replies.

Share This Page