Pretty much exactly what I was thinking
. I must have one in the giant kit that I have for the dremel. Thanks!!Vapor Flask V3 DNA40 Clone thread
- Thread starter Croak
- Start date
- th_trl_thread_readers 0
- Status
Pretty much exactly what I was thinking
. I must have one in the giant kit that I have for the dremel. Thanks!!I have a 40w clone. Some time it boost the power in the first second of vaping if the coil is cold. Most of the times it doesn't. Do you have this issue?
I think I also may have seen my Kangxin 40W go above the set wattage immediately after firing. Probably preheat. I wouldn't call it an issue.
My black Waidea did a preheat function when it felt like it. But only did it at half battery and you had to be at 28 watts 470°F. It only did it on the V3 board. My silver Waidea with the V4 board never had preheat, or at least I never found a way to get it to preheat.
yes! right now I'm using it at 13w but when I push the button the wattage increase to 30for the first second. this is the first time that append this week.
it will continue untill the device is on, but if it goes in standby mode I can't know if it will continue the next time
It amazes me (some of) you guys like the throttling at low battery? I hate it. I thought it was a bug, I can't believe they're saying it's intentional?
I guess it could be seen as OK in VW mode. But in TC mode it's horrible - you try to vape and it cuts the wattage and you think you must be low on juice, or have a wicking problem, or have a resistance/atomizer problem. Eventually you realise everything is fine, it's just you're now too low on battery! It's so annoying.
Glad the ohm reading is finally confirmed as fixed.
And regarding the chips - they definitely are SXK's own. I've had various discussions with them via email, which ultimately led to them fixing the low resistance.
Out of interest, did the increase teh default NP setting when the resistance was fixed? Does it still default at 70, or is it lower now? (The 'correct' value for Ni200 is around 62.)
I told them they should rebrand it as a TCR setting, advertising it for use with Titanium (NP = 35) but I guess they still haven't done that.
Seems strange that SXK defaults the 'Nickel Purity' setting to 70 when most everyone uses Ni200 which would really need a setting of 62?
What are they thinking?
Well that's my question - have they changed it? The reason they originally defaulted it to 70 was because they had the low resistance reading, and the NP setting always needed to be a bit higher than expected. Nickel was 70 instead of 60-62; Titanium was 40 instead of 35; etc.
Now they've apparently fixed the low resistance, so they should also have lowered NP. I am asking if in fact they have - possibly they haven't. And if they haven't, my guess is they just forgot.
Hopefully someone that has reciently purchased an SXK Vapor Flask clone will chime in and let us know ... I am still in the Philippines, so I haven't yet been able to put my hands on the SXK ... but will when I get back to the US.
Is there an IJoy Asolo thread round here? That box has me wanting to know how they're doin temp control.
SXK posted on Facebook today, pointing to DHGate as a place for end-users to buy their mods in single units. It was the Zero they linked to, but a search for SXK shows all their mods, including the VFs:
http://www.dhgate.com/product/facto...-vaporflask/250320171.html#s3-19-1b|948661497
$65.69 including shipping, which is a few dollars cheaper than Focal and (I think) other retailers, but personally I'd use the known-good Focal rather than DHGate with which I have had no experience, and haven't heard of experience (maybe others have?) I'm sure they're legit, just no idea on processing/shipping time, customer service, etc. Also the only shipping option they show for me in UK is Singapore Post, with no option for the much faster EMS/ePacket.
Anyway it's another option for buying SXK mods and other vaping products with free shipping and in single units, which is no bad thing.
http://www.dhgate.com/product/facto...-vaporflask/250320171.html#s3-19-1b|948661497
$65.69 including shipping, which is a few dollars cheaper than Focal and (I think) other retailers, but personally I'd use the known-good Focal rather than DHGate with which I have had no experience, and haven't heard of experience (maybe others have?) I'm sure they're legit, just no idea on processing/shipping time, customer service, etc. Also the only shipping option they show for me in UK is Singapore Post, with no option for the much faster EMS/ePacket.
Anyway it's another option for buying SXK mods and other vaping products with free shipping and in single units, which is no bad thing.
Actually, if your looking for an SXK 60w Vapor Flask, the cheapest I have found is at 3FVape ... $63.99 and free shipping
SXK VF Style Temperature Control VW Variable Wattage APV Box Mod - Silver, Aluminum, 1~60W, 2 x 18650 - 3FVape
SXK VF Style Temperature Control VW Variable Wattage APV Box Mod - Silver, Aluminum, 1~60W, 2 x 18650 - 3FVape
Yeah, the pictures and all the other specs match. That's a spec that is often quoted wrong on the clones.
SXK themselves on Facebook linked to DHGate, specifically this page: Best Variable Voltage Ecig Mods Top Vapor Factory Direct Sxk Temperature Control Box Mod 60 Watt Geeco Zero Mod 60w With Mod For Vaping From Shenxingkang, $52.36| Dhgate.Com
Which also says 7-60W.
It's just DHGate getting the specs wrong.
Having a problem with my SXK VF! When I put fully charged batteries in it works for a couple of minutes then shows the low battery indicator & goes dead. I haven't been on here in a few few because I have been using a yihi temp. control mod. So if this issue has come up already could someone please reference me the pages. Thanks! Any advice welcomed!
- Status
Similar threads
