Vapor Flask V3 DNA40 Clone thread
- Thread starter Croak
- Start date
- th_trl_thread_readers 0
- Status
I don't need another VF, I don't need another VF, I don't need another VF. Maybe if I keep telling myself that I can resist the urge to order this one. Good thing it doesn't have the 60W board in it, otherwise it would probably already be in my cart.
Right! I saw that then forgot about it two minutes later - that is good. That and spring loaded 510 are the best features of it. I am now sometimes building below 0.1 on my ipv4, which goes down to 0.05. The extra flexibility is definitely welcome.
Buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it.. buy it..
I should have mentioned being able to easily use 26 gauge nickel for single coils as well.... too much coffee but I got it handled now... I switched to beer.
What I don't quite understand about this new flask, at least on FT, is why they're offering a 40W version as well as the 50W. Seems to be the same flask - same specs except for being 40W. And it's exactly the same price.
Love how they include an RT review under the specs for a genuine VF where he slags off Chinese clones..
Same with my Silver, the black shows every little spot though. However, it still looks great and functions perfectly!
-Treeburner
Hmm, maybe I should pick up a silver waidea to retrofit then. I've had my black for a couple weeks, not much use except around the house occasionally and it already has a few blemishes (two from day one) and is a fingerprint magnet.
I would think you should go by the spec on the Kangxin 50w Mini Flask or the Heatvape 50w as this unit probably will carry the same chip.
You know the specs there are 0.09ohm-1.0ohm. (it probably does fire down to .06 but also probably in a limited manner, without full power).
Fasttech hasn't published a spec right in 6 months on an initial listing.
Last edited:
Vapor Flask 50W Clone - $56.90 | Broke Vapers
I'm not sure if it's me or them but since the New Year holiday break not much there is of any interest to me. I use to place an order every couple of days or so. Now maybe only a couple of orders since.
Same here, but I did recently get a Lemo 2, Silverplay clone, & a few more subtanks which shipped to my door in 10days. See they are carrying Goliath clones before I have even received my pre-orders on them from GB.
Tough to beat FT for atty clones & misc items, but they seem to have gotten pretty greedy on newly listed Mods in the last year. This flask seems to be the most reasonably priced initial offering from them in a long time. Think they are starting to realize the competition is becoming more formidable.
Way OT here but great price of $43 on the new Egrip OLED with shipping under $5 for us customers. In case anyone might be interested. Better than the $71.50 Joyetech wants. FT charges $41.27 for the original.
JOYETECH EGRIP OLED KIT (VV/VW) by www.yetivape.com.
Team it with a $7.11 RBA Base from FT & it is a great vape!
$7.11 Authentic Joyetech eGrip RBA Base at FastTech - Worldwide Free Shipping
No temp control obviously, but great little stealth vape package to have in your pocket on the go!
JOYETECH EGRIP OLED KIT (VV/VW) by www.yetivape.com.
Team it with a $7.11 RBA Base from FT & it is a great vape!
$7.11 Authentic Joyetech eGrip RBA Base at FastTech - Worldwide Free Shipping
No temp control obviously, but great little stealth vape package to have in your pocket on the go!
Last edited:
I just ordered a couple FDV v3 shorty's, I guess I'll be running out of excuses here pretty soon.
You do realize that installing a FD V3 Shorty will just be an excuse for you to put a DNA40 in it.
I have had my Kangxin Vapor Flask V3 for about two months now. It works really well with a couple of hardware related snags.
I am able to fire coils that are even at .08-.09 ohms too.
Those are:
1.) The adjustable 510 brass screw was too loose and would sometimes come completely out when removing a tank. This I resolved by stacking two small 0-rings on the screw itself, now it stays stiff and stays put with only a minor adjustment every other day or so.
2.) The Fire/Power button's silver finish wore through quite quickly, showing a the button's brass base metal, which tarnishes. Now the brass is getting an aged patina to it. Too bad the buttons could not be made of solid stainless steel or aluminum.
I been mulling over the possibility of getting an iPV4 MOD... still waiting for all the production/supply issues to resolve themselves. It's been
a HUGE FIASCO to say the least! There is SO MUCH WHINING going on over in the iPV4 Preorder thread that I'm waiting for the cheese tray
to arrive! LOL!
We're just in the initial stages of a vast temperature controlled hardware phase, sort of like a mini-industrial revolution for vaping hardware!
For now it will be interesting to sit back and see what happens!
I am able to fire coils that are even at .08-.09 ohms too.
Those are:
1.) The adjustable 510 brass screw was too loose and would sometimes come completely out when removing a tank. This I resolved by stacking two small 0-rings on the screw itself, now it stays stiff and stays put with only a minor adjustment every other day or so.
2.) The Fire/Power button's silver finish wore through quite quickly, showing a the button's brass base metal, which tarnishes. Now the brass is getting an aged patina to it. Too bad the buttons could not be made of solid stainless steel or aluminum.
I been mulling over the possibility of getting an iPV4 MOD... still waiting for all the production/supply issues to resolve themselves. It's been
a HUGE FIASCO to say the least! There is SO MUCH WHINING going on over in the iPV4 Preorder thread that I'm waiting for the cheese tray
to arrive! LOL!
We're just in the initial stages of a vast temperature controlled hardware phase, sort of like a mini-industrial revolution for vaping hardware!
For now it will be interesting to sit back and see what happens!
Last edited:
I posted this in another thread but maybe you folks will want to see it so here, just showing how easy it is to take the bottle out and reinsert
Thanks for the link dwcraig1.
I'm waiting for the Black version to arrive. It looks SO much better than the Silver one, plus they use a different screen cover instead of that crummy looking mirrored one on the silver MOD
I'm waiting for the Black version to arrive. It looks SO much better than the Silver one, plus they use a different screen cover instead of that crummy looking mirrored one on the silver MOD
A bit of very unimportant info here, I was using "a" micro usb to charge my stuff as well as hook up my camera to the computer. Well that cord started having problems (it served me well) so I changed it to the one that came with my Kangxin VF and low and behold it only charges, no data, DUH
- Status
Similar threads
