Vapor Flask
- Thread starter sb713
- Start date
- th_trl_thread_readers 0
- Status
Anyone that does trophies or plaques should be able to do a good engraving for you.
You'll probably have to supply them with artwork if it's something other then text.
You'll probably have to supply them with artwork if it's something other then text.
Stick around. That's what I used to think. After awhile it all starts to pile up and something has to go to make room for new things.
BlueSnake:14507729 said:
Stick around. That's what I used to think. After awhile it all starts to pile up and something has to go to make room for new things.
Yeah especially how fast the technology is moving right now.
Not sure if there's one near you but I know that Things Remembered does engraving. They even have images of whiskey flasks on this page: Personalized Engraving at Things Remembered.
The guys from Vaporflask got back to me yesterday (sunday) and told me Evolv was working on a firrmware update that should fix the problems i was having (locking up, freezing screen). I was put on a list of people to contact and they told me I could keep using the device with kanthal, which im doing now.
Im sure it will all work out.
Im sure it will all work out.
Last edited:
I started having some similar issues this weekend. Is this a firmware update we as the user will also be able to do? I really don't want to have to send my device anywhere.
I agree. It would be damn nice to be able to do a USB firmware upgrade, that's for sure.
Does anyone know if this chip has this feature? I'm guessing no, just because you would think they would make sure to mention it somewhere.
Pretty sure it's not a user-accessible feature. There's no way to get into the chip. The USB port isn't wired to be a data input port.
Burping out loud using Tapatalk
Burping out loud using Tapatalk
From what I read somewhere this is something Evolve will make available for their dealers to be able to do. Unfortunately I'm pretty sure it won't be user upgradeable unless Evolve changes their process.
I received my VF on Saturday. I put several builds on my Plume Veil and couldn't get a really satisfying vape. All the dual coil builds came in from .11 - .15 ohms. Tried 12, 13, 14 wraps, etc.. 28 and 30 gauge ni200. I tried pinching and not pinching the coils. I like a really warm vape with lots of vapor. I thought maybe there was too much air using the Plume Veil even though I reduced the air flow as much as possible. I then put a build on my Tautrus atty. Again dual coils reading at .11 ohms. This is giving me a warm vape but I'm maxed at 40 watts and a temp at 420 degrees. I'm concerned that I'm aleady maxed in the wattage department so there's no room for flexibility when building the coils in order to acheive a really warm vape.
Am I doing something wrong here or is this as good as it gets? Can I do something to get a really warm vape at a lower wattage?
Am I doing something wrong here or is this as good as it gets? Can I do something to get a really warm vape at a lower wattage?
Welp. If anyone ordered the VF from dixie's, you can call EM up for your tracking number
Burping out loud using Tapatalk
Burping out loud using Tapatalk
You're not going to get the warm vape you're used too with temp control. The temperature is the limiting factor. If it went to 100 watts the temp control would still give you a cooler vape. You have the choice of getting used to a cooler vape or going back to kanthal and not using temp control.
You can but then you'll run the risk of burning your wick. The DNA40 temp control was built for safely vaping without the risk of degrading the wick or juice with high heat.
Last edited:
Moel18, I am exactly the opposite, I was looking for a cool flavorful vape and finally hit my sweet spot. At first it was a little warm but have been using mostly tanks.
I built a .08 ohm cool on a 3mm mandrel and got a much warmer vape and started working my way up. Have you tried building lower?
You find what you are after you'll just have to use more of that Ni200 you picked up.
Good luck!
I built a .08 ohm cool on a 3mm mandrel and got a much warmer vape and started working my way up. Have you tried building lower?
You find what you are after you'll just have to use more of that Ni200 you picked up.
Good luck!
is everybody's battery gauge working properly?
even with both batteries @ 3.59v my battery gauge is full.
I took out my batts, put them back in(@3.59v) and the gauge read about 1/2 full. I thought it fixed itself....I hit the fire button and the gauge climbed all the way to "Full".
is there a way I can reset the board? (other than taking out the batteries for a few minutes)
I emailed VF and awaiting response.
EDIT:
both my batts are matched LGs only used in the VF
even with both batteries @ 3.59v my battery gauge is full.
I took out my batts, put them back in(@3.59v) and the gauge read about 1/2 full. I thought it fixed itself....I hit the fire button and the gauge climbed all the way to "Full".
is there a way I can reset the board? (other than taking out the batteries for a few minutes)
I emailed VF and awaiting response.
EDIT:
both my batts are matched LGs only used in the VF
Last edited:
Anything I need when my VF comes in? I have some fresh batteries already. Anything else?
- Status
