Vapor Flask

[Coldpunk]

After one day with the vapor flask all I can say is wow. This chip is amazing.

Spent the whole day building and rebuilding the rose v2 and a kayfun. The kayfun I built first and found it's limit to be around 14 watts, built with rayon and n1200 contact coil at .19. Moved on to the rose and tried a bunch of builds, micro/Japanese cotton, micro/rayon, micro/cotton yarn, spaced coil/silica, and lastly the best performer spaced coil with rayon. All builds around .14-.19. Thick flavorful vapor with the rayon and spaced coil in the rose. After fiddling with the juice control, airflow control, and the temp and watts settings on the vapor flask I've got a build in there that can handle 26 watts at 410° for looooong pulls with out dropping below 22 watts at any point during the pull. Chain vaped through two full tanks and the coil is clean as a whistle(JTJM creme brûlée). Battery bar hasn't even dropped below 7/8ths full. This is ridiculous.

I'm curious about other attys on here, but I think I'll just be vaping this set up for a while. I can't believe I'm pushing 26 watts through an RTA.

I'm off to fog out a haloween party...

 

[sedge]

As soon as I can find a Flask I'm ordering! Been undecided for a while and I'm still waiting on Rdna. I wish these weren't so hard to get!

Still in stock in gunmetal finish

http://www.vapinart.com/cart/mobile/Vapor-Flask-Dna-40-Gun-Metal--P1445.aspx

 

[massbass22]

As soon as I can find a Flask I'm ordering! Been undecided for a while and I'm still waiting on Rdna. I wish these weren't so hard to get!

Still in stock in gunmetal finish

http://www.vapinart.com/cart/mobile/Vapor-Flask-Dna-40-Gun-Metal--P1445.aspx

No it's not but thanks. The "add to cart" tricked me already once lol. When you actually try, it's out of stock.

 

[BlueSnake]

If you check vapinart's FB page next week they'll tell you when they'll have more in stock.

 

[massbass22]

Will do...every second lol. Thx

 

[Budared]

Really hope that they did just a little bit extra QC on the models that have been shipped to Europe on the basis that return shipping after repair would cost them a fortune. I don't want to get it and then spend a further month shipping it back

btw, for European and other international customers, Midlands Vaping is getting another batch in tomorrow and will put them online at 8pm GMT

 

[Malefilipinonurse]

Love my 40s!

 

[zeppo]

Im having the random screen flashing, freeze ups and garbled info happening to me as well. Ordered from vapinart, it happens, it sucks but i am sure it'll get fixed.

 

[Robinowitz]

Absolutely beautiful! Have been searching the web and this thread for the dimensions of the VF. There's lots about the specs but am looking for the approx height/ width/ depth. Doesn't have to be perfect just wanting to see if it will fit nicely in my hand. Thanks!

 

[Bassnorma]

I have one on order....can...not....wait!!! Very excited!

 

[Heespharm]

Im having the random screen flashing, freeze ups and garbled info happening to me as well. Ordered from vapinart, it happens, it sucks but i am sure it'll get fixed.

Mine was fine for 5 days then today...garbled twice... Time to email vf again

 

[Bassnorma]

Awww...Mine was to be delivered but is going through an extra level of testing before shipping out. I have to assume that they are doing that because folks like yourself saw an issue.

I bet they resolve it with no hassle. Let us know how it goes!

 

[Scottitude]

Absolutely beautiful! Have been searching the web and this thread for the dimensions of the VF. There's lots about the specs but am looking for the approx height/ width/ depth. Doesn't have to be perfect just wanting to see if it will fit nicely in my hand. Thanks!

3 5/8" x 2 3/8". They look bigger in photos.

 

[Robinowitz]

3 5/8" x 2 3/8". They look bigger in photos.

Thanks! Just a tad taller and wider than my Reo Mini. Nice size for me and front pocket, especially with the indentation.

 

[Pocha]

I think enough can't be said about how ergonomic and comfortable the Flask is. And...IMHO the whole left/handed right handed thing is way overblown. I'm naturally very right-handed but usually end up vaping with my left since my right hand is usually occupied (computer mouse, phone, gear shift in my car, etc...). I find it equally comfortable in either hand. I know PB didn't like it in his left hand...maybe for langer hands it's an issue (?). I don't know but for me it's equally comfortable to hold and fire in either hand.

 

[RickCain]

For sure @Pocha! I find myself vaping with my left hand too and it is equally as comfortable.

 

[massbass22]

Has anyone ever had their Flask engraved? If I can ever manage to find one I would like to have some small picture or something engraved on the front but I have no idea where that could get done. I guess I should worry about finding the Flask first huh?!

 

[Coldpunk]

Rose v2

.17ohm 25.5watts 420° after 12ml of juice. Built the coil on a Qvapes coiler with the 2.5mm mandrel 30g and then filled it with rayon wick.

Check out that battery meter...crazy. Day 2 same charge.

 

[BlueSnake]

Has anyone ever had their Flask engraved? If I can ever manage to find one I would like to have some small picture or something engraved on the front but I have no idea where that could get done. I guess I should worry about finding the Flask first huh?!

If you ever want to resell, engraving could possibly negatively impact the resale value.

 

[massbass22]

True but I never sell lol. Just keep adding and adding