RDA Velocity Question

Status
Not open for further replies.

Vesuvius

Moved On
ECF Veteran
Mar 14, 2010
368
382
40
    vape Mail Day :D

    Got a Tobeco Velocity Clone.
    I usually run dual 26g kanthal around .4 or .5

    I enjoy .2 but, It is usually to hot a vape for me.

    It seems like the setup on the Velocity/Clone is more suited for much lower ohm builds around .1 to .3 with all of the air you can pull through it, maybe making a .2 build not be such a hot vape with said air flow options.

    Am I correct in that assumption?

    If you have a Velocity/Clone, how do you run yours?
     

    danielpm

    Senior Member
    ECF Veteran
    Verified Member
    Mar 23, 2012
    156
    129
    33
    Braga, Portugal
      I found out the answer to it.
      Did a dual .28 build on it and opened up the air a bit.
      Loaded it with some Muffin Man and it hits like 10 inch straight stacks on a big rig!! Wasn't a hot Vape either so, :thumbs:
      My favorite VW build on velocity is 26" kanthal/SS @ 0.5Ohm. Lower is to hot for me, and my Evic VTC don't last long.

      Now I only use TC with SS.
       

      Tol

      Super Member
      ECF Veteran
      Verified Member
      Jan 2, 2011
      832
      811
      NY
        My favorite VW build on velocity is 26" kanthal/SS @ 0.5Ohm. Lower is to hot for me, and my Evic VTC don't last long.

        Now I only use TC with SS.
        That is my basic go-to build as well on the velocity. Kanthal or Nichrome. I also built 0.11 dual nickel for TC and it worked very well

        sent using Tapatalk
         

        danielpm

        Senior Member
        ECF Veteran
        Verified Member
        Mar 23, 2012
        156
        129
        33
        Braga, Portugal
          I know nothing when it comes to SS and TC only having a Mech. Kanthal is all I know.

          Can you run SS coils on a Mech? Or are they strictly for TC devices?
          SS is the only wire (right now) that you can use in both VV/VW and TC. Give it a try on your mech, is the cleanest vape that I can get.
           
          • Like
          Reactions: MMW

          Mowgli

          Runs with scissors
          ECF Veteran
          Verified Member
          Mar 25, 2013
          8,711
          36,731
          Taxachusetts
            Tobeco Velocity with chuff tip - I like dual 24ga Kanthal .34Ω @ 75W-80W

            I close air flow all the way, with one of the air slits towards me.
            Then I turn the upper half, counting how many holes pass above that slit and stop it when the 17th hole gets over it. That shows the slit a little less than half open. That gives me the airflow resistance I like and keeps it cool enough after getting past the initial spit.

            I only tried one other build at .44Ω and like this one better, enough to not bother with trying any others.
            I keep my vaping as simple as possible and don't fix what ain't broke.
             
            Status
            Not open for further replies.

            Users who are viewing this thread

              ')