Vision DIY 80 Mod (Vision enters the TC Mod Market)

[Ramsay Bolton]

Better late than never!

Their Spinner Ego bats were/are decent, wonder what the DIY 80 mod will bring
to the table?.

Vision Vapros DIY 80

DIY 80 TC mod is a new product from Vision. DIY 80 utilizes special motherboard supporting 4 kinds of modes: BYPASS, VW, TC and OUT DIY. The small size make it convenient to carry. You will have fun in vaping with the OUT DIY mode.

Features

1. DIY 80 is a really strict precision temperature control mod.
2. The Coil will not turn red in temperature control mode.
3. DIY output wattage
4. Automatically compatible with all the kinds of temperature control coil.
5. Different mode supports 0.03ohm ~ 3ohm taste type atomizers.
6. Output power: 5W-80W, 200-600℉(100-315℃)
7. Size: 85mm(L) x 22mm(W) x 40mm(H)
8. Net weight: 146g
9. 1*18650 2000mAh rechargeable battery
10. Color: Black, White, Stainless

Easy Management Console
The Mod supports 0.15ohm coil to make large amount of smoking.Stainless steel material makes it durable and fashionable.
Suitable with most atomizers in the market.
Automatically enter low power mode if no smoking within 3 seconds.
360 Degree Twist Button.

Package

Package
1pcs/blister box, 20pcs/medium boxMedium box size: 117*93*151mm
set / paper box
Box size: 100mm(L) x 98mm(W) x 47mm(H)
Weight with box: 245g
Each set contains:
1 pc DIY 80
1 pc Micro-USB charger cable
1 pc User Manual
1 set / paper box
Box size: 100mm(L) x 98mm(W) x 47mm(H)
Weight with box: 245g



Each set contains:
1 pc DIY 80
1 pc Micro-USB charger cable
1 pc User Manual

 

[Ramsay Bolton]

More pics

 

[Ramsay Bolton]

And more pics

 

[Ramsay Bolton]

And two more pics

 

[Ramsay Bolton]

Found some more pics here.

http://www.heavengifts.com/Vision-DIY-80-TC-MOD.html

Looks like the pre-order/pre-release pricing is in the $60 range


Haven't found any vid reviews yet. Will keep my eyes peeled.

 

[nelsonm64]

non adjustable 510! what the hey where they thinking??? it's a pass for me...

 

[AtmizrOpin]

could that be the steamcrave sqounker mod board? just upped to 80 watts?

 

[hazozita]

Here's a preview of it that goes over functions. The DIY mode looks fantastic!

 

[Ramsay Bolton]

non adjustable 510! what the hey where they thinking??? it's a pass for me...

From what I've gathered, the final release version will have a spring loaded 510 connection.

 

[Ramsay Bolton]

Most of my pics have vanished with the exception of those from HG.

Hopefully, HG won't mind me borrowing a "few" more.

 

[nelsonm64]

From what I've gathered, the final release version will have a spring loaded 510 connection.

that's good news! that's an absolute must these days, atleast for me it is

 

[Ramsay Bolton]

 

[hazozita]

Finally found a US vendor with them -- ecig.com has them for $39. Ordered one in stainless -- should be arriving by the end of the week (assuming USPS doesn't have a glitch). Looking forward to trying it out.

Vision DIY 80w Box Mod | Ecig.com

 

[Ramsay Bolton]

Finally found a US vendor with them -- ecig.com has them for $39. Ordered one in stainless -- should be arriving by the end of the week (assuming USPS doesn't have a glitch). Looking forward to trying it out.

Vision DIY 80w Box Mod | Ecig.com

Cool!

Please post your impressions of the the mod after you've had a
chance to play with it for awhile.

 

[cobalt327]

Fires down to 0.03ohm, one of the lowest I'm aware of. Be interested in seeing how the display works out:

 

[hazozita]

Well, got my DIY80 today. My one word review would be "underwhelming."

On the plus side, it is very comfortable in hand – the rounded edges fit well, and it’s a very comfortable thumb fire device. I also like the battery door being hinged. Fit and finish is nice (I have it in SS) and there is zero button or battery rattle. It’s easy to get the battery in and out without tearing the wrapper even though it’s a snug fit.

That’s about all the pluses. On the negative side, the 510 spring has a short travel, so many of my attys don’t sit flush. Getting into the menu is a pain – five clicks to do that but since three clicks locks the device, more often than not it locks when you want to get into the menu. It usually takes a couple of 5-click sequences to successfully bring up the menu.

22mm attys fit with no overhang; anything larger will overhang the front and sides.

TC performance is poor – so far it’s a real pulsing, roller-coaster ride. It works, but it’s a clear step behind Joytech and Smok TC, and way behind YiHi and Evolv TC. I've only used it with Ni so far, so perhaps it is better with other wires. I'm not optimistic given its Ni performance, however.

It never asks if it’s a new atty when you switch attys in TC mode. You have to remember to press plus/minus to set the resistance, or it will use the base resistance of whatever you just removed as the base resistance of what you put on.

The DIY mode is what interested me the most and, while it works, it’s not well implemented from a UI standpoint. It is very difficult to see the wattage you’re setting when you’re in DIY mode since it’s in 2 point type in the corner of the screen. The DIY graph remains on screen when you’re firing it in DIY mode so there’s no visual confirmation of what it’s doing other than the graph and the tiny, tiny wattage indicator in the top right corner.

A rather disappointing day for vape mail.

 

[Ramsay Bolton]

hazozita,

I was hoping to hear otherwise from you.

Based on the "Vision" brand name and the attention to it's
appearance, you'd expect excellent performance.

It's supposed to be firmware upgradeable. Maybe there's new firmware in the
works.

You can contact them here if you'd like:

Vapros DIY 80 - Vision Electronic Cigarette

 

[hazozita]

Thanks for the link. I sent an email asking about firmware updates (it does specifically mention it is firmware update-able in the manual) and will post back with what I find out.

Hopefully it will get better with updates! It has the potential to be a nice little device.