- Status
maybe u can share whats ur budget and the bros here can intro some to you? dun be like me, started vaping before coming into this forum, and end up wasting some money on PV that i kindda regret! Should have gone for something better!
So u dun have to waste money and upgrade very soon again like me!
So u dun have to waste money and upgrade very soon again like me!
Be careful of how you phrase and ask though...don't blatantly specify names, where, etc. The situation is as bad as it gets now with more and more public news on the prosecution of our habit.
To fully experience various juices and get into the fun of vaping, you should get a Rebuildable Dripping Atomizer...learn how to coil, wick and adjust the RDA. Then, get the Kayfuns or genesis types to fill your tank with juice for convenience.
There are tons of threads in the international forums teaching you how to coil, wick and discussions on which RDA is good.
For starters, usually they pick up the least expensive ones like IGO series, Smok RDA....it's basic and easy to build your coils on. Kayfuns get a bit more complicated as you have to deal with leak-avoidance, etc...but then the experience of using it is superb after you master it. Let us know when you find out more, about which your choice is and we can elaborate further.
To fully experience various juices and get into the fun of vaping, you should get a Rebuildable Dripping Atomizer...learn how to coil, wick and adjust the RDA. Then, get the Kayfuns or genesis types to fill your tank with juice for convenience.
There are tons of threads in the international forums teaching you how to coil, wick and discussions on which RDA is good.
For starters, usually they pick up the least expensive ones like IGO series, Smok RDA....it's basic and easy to build your coils on. Kayfuns get a bit more complicated as you have to deal with leak-avoidance, etc...but then the experience of using it is superb after you master it. Let us know when you find out more, about which your choice is and we can elaborate further.
Well actually Kayfun leak issues, is mostly due to filling from the top. However if you fill from the fillport it leaks hardly happens.
Personal experience from the 3.1 and lite.
The lite can be a pain if you fill using a syringe from the bottom as if attempt to force all the juice in at one go it will leak from the o-rings due the pressure.
Top filling takes abit of practise but doing it wrongly will most likely cause flooding to the inner chamber and leaks from the air holes.
Practise with the cheapest liquid - water.
Also, if you vape too hard using the kayfuns (i.e. inhale very hard or long)...it will leak. I've experienced that tons of time and solution is to suck the reservoir of leakage from the airhole and it stop leaking.
Try not to use syringe to fill, prolong it will damage the O ring
Sent from Gotham City using Tapatalk
I was thinking of something like ego c twist VV. I had a tight budget which is 80 bucks.
Sound rediculious right? Haha.
Sound rediculious right? Haha.
Nothing is as ridiculous as the amount we all have spent in analogs
80 bucks can get you something good across the bridge dude.
Since its on the side filling, whenever you use a syringe blunt / flat type
Sent from Gotham City using Tapatalk
Since its on the side filling, whenever you use a syringe blunt / flat typeprolong poking into the fill hole the membrane like, will be loose and expand so in short, juice will leak. So far I do not know if there is replacement. Safest way is top filling
Sent from Gotham City using Tapatalk
Wait. What membrane are you referring to..?
Burping out loud using Tapatalk
My friend showed me his leaks due to side filling and told me inside there is a membrane like structure once loose can't prevent leaking. Showed me his tank was leaking even filling from the top
Could it be loosing of O ring?
Sent from Gotham City using Tapatalk
I have a authentic kfl+ v2 and there isn't a membrane at the bottom fill hole. If there's actually such serious leaking, then it's most likely an issue with loss of internal vacuum. It's commonly associated with either not tightening every component down properly, or the orings at the top cap, base or the little oring where the chimney goes through has been worn out. If the leaking is from the bottom fill hole itself, the new v2 has a tiny little oring on the fill hole screw. That might haven't gotten squished or worn out. Nods.
Personally i suck at filling from the top, so I do all my filling from the bottom using a blunt tip syringe. No leaks though.
Burping out loud using Tapatalk
I will ask him to try out and show your post to him, or it might be the KFL clone has some issues.
I've seen the mini KLF, have you tried?
Yes top filling sucks once not careful leaks happen.
Sent from Gotham City using Tapatalk
I've seen the mini KLF, have you tried?
Yes top filling sucks once not careful leaks happen.
Sent from Gotham City using Tapatalk
Oh! He has a clone. Right right. Chances are it's the smaller oring that sits in the top cap. Sometimes that little bugger slips down the chimney, that causes it to leak like a bidge. My clones do that sometimes too.
Yeah I've tried it. It basically looks like someone took the russian and stretched it until it became long and skinny lol. I'm not a fan of the shape though, since my mods are all 22mm diameter. A kayfun mini would be sick in something like a microstick though!
Burping out loud using Tapatalk
- Status
