WISMEC Reuleaux RX200 TC

[zeus01]

So, I'm guess it is a function of running dual Ti coils. The resistance on several devices reads at 0.11ohm, including an external. But, on both the RX and dna 200, when it reads at 0.11, I do have to bump up the settings. I normally vape Ti at 50w and 450F; with the dual coils, I'm running it higher at 50w and 550-570F. I can fake the resistance, like I said, or override it on the DNA. But, this sounds like it might be a function of dual Ti builds. Are you using dual Ti builds？

For the RX, I just updated, so messing with TCR. Given the results I've been getting, should I be adjusting up or down on the TCR from the recommended Ti TCR setting?

And yes, updated to 3.0.

Right now, running a dual twisted Ti build, reading at 0.11, 60w and 530F.

so its a weaker vape
has nothing to do with resistance more of the chip itself specially if you are comparing to something like an sx

had that issue before with the evic
here never had that issue

yup tweak on the dna i cant answer you

for the rx,with the new software,

try the new ti mode first maybe its fixed

or go to m1 and set any of these tcr values,
these are all ti,

TCR values (VTC Mini - Cuboid - RX200)

use either grade 1 or grade 2 see if it works for you

 

[KenD]

Just upgraded to 3.0, unfortunately it switched to celsius, and forgot how to get back into Fahrenheit. Any help would be great. I'm such a noob

It round-robins. Just go up or down in temp. When you reach the maximum or minimum it stops. Press the up/down button again and you're in farenheit.

Sent from my M7_PLUS using Tapatalk

 

[Jim_ MDP]

I am trying to spread this info because I know lot of ppl are confused. The post climbs its way up on reddit and have it on my blog. Hope it helps some ppl.

It's a great find, thank you.

I and others have been discussing these heads for a few weeks... wondering just what the hell is in the non-TC ones. It was obviously not SS.
Now that I know there's a Pink ringed SS, I know what to look for.

Do you work for CBS?

 

[2legsshrt]

I was trying to figure out what you guys were talking about it sounded like the VTCmini. Then I realized they came out with the update. Can you use the same update wismec app or do you need the new one.

 

[Daisychainvaper]

you could use the same technically but the newest updating file is only in the new package, so you need to redownload everything

 

[jackmormon]

This upgrade is totally sweet!! Kudos to Wismec. A $40 mod that can do all it does... WOW! TCR of 0410 is the sweet spot with NiFe52. Only been using it ten minutes but it seems to vape almost identically to a DNA200 with the NiFe52 curve.

 

[Walleytroll]

Just updated this beast today, and wow the new software is amazing. I've been using the Ni200 mode for a few weeks, and coming off an SX mini it seemed to be a bit lethargic. I was running the dual nickel build in my Aromamizer all the way up at 600F and it still was not as hot as I wanted it to be. Threw a TCR for nickel on the memory slot today and BAM there's my perfect hit. I had to turn it down to around 480 and now it's vaping like a champ. What a great mod at a great price, I couldn't be happier right now.

 

[Tpat591]

Loving the RX200 with the new software using the TiT1 TCR Now! Much, much better!

 

[Daisychainvaper]

I am selling all my mods currently except the RX200s (& the DNA200 version) and my VTCs. So happy with this stuff that there is no need for other mods for me.

 

[EthanThorn]

how to use tcr evic vtc mini

404 error


Sent from my iPhone using Tapatalk

 

[EthanThorn]

I am selling all my mods currently except the RX200s (& the DNA200 version) and my VTCs. So happy with this stuff that there is no need for other mods for me.

I sold all my mods to get the RX200 so far very happy unfortunately I don't have a fall back yet


Sent from my iPhone using Tapatalk

 

[angelclaw]

Just sent wismec a improvement proposal for the next firmware.

They should: In TC profile, when pressing FIRE + UP for locking resistance, make the screen read the current atomiser resistance, and ALLOW for tweaking the lock resistance using the UP/DOWN buttons, just like the Koopor/X-Cube 2/Treebox products. Then pressing FIRE will save the set resistance as a baseline.


I hope they listen, because the vape game is big and SMOK got it right partially...It's not that consistent with SS on the X-Cube 2.

Even without this feature, the RX200 is a way better TC mod.


And oh yeah... ordered a Cuboid mod, just because it's a more slim profile mod for carrying around. But I think the RX200 is still better because it packs killer battery life.

 

[Tpat591]

404 error
Sent from my iPhone using Tapatalk

This is what should come up:

 

[puffon]

This is what should come up:

View attachment 522355

Do you put a "0" before the 2 digit codes?
Such as SS316L = 088

 

[2legsshrt]

Got it no sweat. I still like the Ti better with TCR370 then the Ti mode. I'm getting a great vape at 430F now instead of 480-500.

 

[Tpat591]

Do you put a "0" before the 2 digit codes?
Such as SS316L = 088

4digits in field. Add leading zeros as appropriate.

 

[puffon]

4digits in field. Add leading zeros as appropriate.

Got it. Thanks!

 

[2legsshrt]

Do you put a "0" before the 2 digit codes?
Such as SS316L = 088

Yes you would for SS Ti is 3660 so 366 is the correct one on this but it seems better at 370. The higher you go with the TCR the hotter the vape.

 

[FishingBuffalo]

With RX200 turned off, hold FIRE and DOWN for a few seconds and it will display the battery voltage in each battery. Update3.0

 

[angelclaw]

With RX200 turned off, hold FIRE and DOWN for a few seconds and it will display the battery voltage in each battery. Update3.0

It's there since 1.03