Yeah, we got a little off topic for a moment.Isn't that for the DNA200 version only? This is the RX200 thread
WISMEC Reuleaux RX200 TC
- Thread starter USMCotaku
- Start date
- th_trl_thread_readers 0
- Status
When in ti mode it let's me adjust the watts but only up. If I try to go down it goes down tenths at a time opposed to speeding up. If I hold it, it just sits there and switches back to temp adjustment. Am I missing something? I didn't realize it was on 200 watts and choked a little lol
Sent from my LIFE PURE using Tapatalk
Sent from my LIFE PURE using Tapatalk
Isn't that for the DNA200 version only? This is the RX200 thread
Yup. Sorry. They asked and it seemed the easiest way to answer. If you're a moderator feel free to remove the posts (as far as I'm concerned).
Try cycling thru the TC settings it should fast scroll after that. Mine did it once too.
Just got my rx. Loving it thus far. Barely larger than my Evod VT (full size). Heavier than my VaporFlasks but manageable.
Sent from my M7_PLUS using Tapatalk
Sent from my M7_PLUS using Tapatalk
Hi guys, i have some issues wit my RX200, after using my RX200 1 day, it stop to work properly, now i'm not able to go into TC mode menu, it's working only in VW mode, i already did the upgrade to 1.07, the same. If i'm pressing the fire button 3 or 4 times nothing happens. If i'm pressing 5 times it's turning on/off like normal. any recommendation ? thank you
The only help I can offer is the device is sensitive to the pattern of the clicks. 123 evenly spaced.
For 1 day, i knew how to press the button now i don't know anymore .... anyway thanks
The only thing I can think of is someone else was having that problem and it turned out the resistance was over 1 ohm. It seems that it won't switch to TC unless it's under 1 ohm. I don't have that mod, just what I read a few days ago. Other than that I have no ideas.
Cheers,
Steve
Cheers,
Steve
Ok Steve, if you watch a video, about this RX200, they switch between menu, between mods without any atomizer,tank,rba,coil.............
I'm not saying it won't, I was repeating what another poster said a couple of days ago. It just sounded like the same problem you were having. He was saying his wouldn't switch with or without an atty on it. He then said wismec told him that, he tried it and it worked. I have no way of knowing whether or not any of it really happened, I was just trying to help.
Cheers,
Steve
Cheers,
Steve
I know you are frustrated ....Coming here for the first time asking a question and getting snarky when a couple of forum members try to help you
To me that is rude. I can help you call the company be rude to them and see how much help you get there too.
To me that is rude. I can help you call the company be rude to them and see how much help you get there too.
Try rerunning the update maybe something didn't go quite right, what tank and build are you running on it?.
I'm sorry if i was rude to somebody, it wasn't my intention at all, sorry againI know you are frustrated ....Coming here for the first time asking a question and getting snarky when a couple of forum members try to help you
i just did the update, nothing changed, i'm using a Crown Point tank with 0.5 coil
Maybe your "three clicks" is four. It's easy to do. I find myself overshooting. Trying doing just "two clicks" and see if your brain-to-fingers translates it to three.
It seems really hard to imagine the display working, the update showing the correct firmware, but failing in this very specific way. Not impossible, but it's more likely it's not getting 3 clicks from you the way it wants (it's touchy).
It seems really hard to imagine the display working, the update showing the correct firmware, but failing in this very specific way. Not impossible, but it's more likely it's not getting 3 clicks from you the way it wants (it's touchy).
- Status
Similar threads
