Your not going to melt these plugs I use a bartleby PV and forgot to turn off the switch and completly melted the cart however I dug out the plug it it was still perfect... it withstands much higher temps then the cart I can tell you that..
ZFM Zero Filler Mod
- Thread starter SCOTTYBALLS
- Start date
- th_trl_thread_readers 0
- Status
Your not going to melt these plugs I use a bartleby PV and forgot to turn off the switch and completly melted the cart however I dug out the plug it it was still perfect... it withstands much higher temps then the cart I can tell you that..
I've found its easier if you cut the + in it before you cut the outer circle of the silicone, so your not stabbing your fingers with razor blade and almost vaping 20mg AB-Negative. Just make sure u dont cut all the way to the sides so it doesnt fall into 4 pieces when your done.
just tried it with my new 801 and i have to agree that this is the best mod i have tried so far!! my center cut ended up being more like a star shape than an x or a hole... but who cares if i'm able to vape like this?? no leaks so far and no burnt taste either... you are truly a god among men!!
this makes me wonder could you do the same thing with a silicone sheet of any kind???
just touchin' base again... i vaped for a while on this last night and all went well... until i put the 801 down... then it leaked like mad... but it might be operator error rather than a design flaw!!
I sometimes get the impression that people have some kind of "urge" to say that their device vapes like a champ. I think they just get ahead of themselves. Before posting comments, try it till you're sure of something
Here is what I have found with pretty extensive testing of this mod on my standard 510.
1. Great taste and vapor
2. Does not leak when I pull the cart back off the atty slightly when not in use.
3. Does leak when I leave the cart pushed against the bridge of the atty for extended periods of time with the cart pointing down.
4. Uses all the liquid in the cart.
5. Does not leak quickly enough to flood during regular use (i.e. at pc, watching a movie, etc)
It is a fine mod, but I am sticking with PTB for out of home use.
1. Great taste and vapor
2. Does not leak when I pull the cart back off the atty slightly when not in use.
3. Does leak when I leave the cart pushed against the bridge of the atty for extended periods of time with the cart pointing down.
4. Uses all the liquid in the cart.
5. Does not leak quickly enough to flood during regular use (i.e. at pc, watching a movie, etc)
It is a fine mod, but I am sticking with PTB for out of home use.
I tried this mod with much success. Great idea. However, when I put it down, it leaks. I thought it did this method correctly, until I set it down. Did I do something wrong?
Hey Ken, I answered that question for you on the other thread, but yes, I do think that this mod works better than what I was doing with the wire mesh...it is safer for my fingers as I am not poking myself with that wire screen anymore lol!
some people are finding great success with the wire mesh, and I definitely applaud them for that, but I found it became too much hassle to deal with.
When laying my 510 down, I make sure that it is elevated on something, even slightly works. If it is even slightly elevated with the batt up (cart down), then it doesn't leak at all! If it sits for long periods, then I simply hold it up slightly when vaping the first 2 times (batt up \ cart down) to let the juice drop again.
Love this mod. The only downside is that I have to refill my wife's because she can't seem to do it without making a mess. That was the good thing about the poly and topping off with drops.
When will someone invent an auto-injection cart system? Even if it cost $200, I would pay it. Talk about micro engineering!8-o
I have to refill my wife's too.. I think she can do it she just wants to feel like she has a slave some kind of power trip thing...
Something sort of like this, right?
http://www.e-cigarette-forum.com/forum/modders-forum/24832-mahmba-concept-pv.html?highlight=mahmba
Last edited by a moderator:
No pic either for me.. The picture must of been moved off the server its hosted on or the host is down atm.
The SideWinder is a different PV.. if I'm not mistaken the maHmba has a liquid delivery system.
Correct, the juice is autofed from the bottle seen through the window in the side.
- Status
Similar threads
