Rincoe Manto AIO Plus Kit

Manto AIO Plus Kit supports single 18650 battery for maximum battery life, and applies type-c fast charging with 5V/2A, it will provide you all-day vaping experience. You can enjoy MTL & DTL & DIY vaping with one device (RBA is sold separately). A digital tube is designed to show you the vaping information, such as remaining battery life, corresponding resistance and suggested voltage. Manto AIO Plus is powered by new Manto 2.0 chip, it can fire up to 80W max, which will bring bigger clouds for you. The pod has 3ml e-juice capacity. It is compatible with all Manto AIO Coil (including RBA) and Rincoe Manto AIO Cartridge

Details:
1. 1-80W adjustable power
2. External 18650 single battery
3. Compatible with all Manto AIO Coils, including RBA
4. New Manto 2.0 chip
5. Type-C fast charging, 5V/1A
6. Provides MTL & DTL & DIY vaping(RBA are sold separately)
7. Digital tube to show vaping information
8. Safety protection: 10s Overtime/Over Discharge/Over-heating/Low Voltage/Short-circuit/Battery Reverse Protection




Rincoe Jellybox XS Kit

Jellybox XS Kit is compact and portable enough to be carried anywhere. It is powered by a built-in 1000mAh battery with 30W max and Type-C charging. It has button pressing and auto draw vaping mode for your option. It is also designed with 3-color smart LED lights and the digital tube to show you the vaping data. In addition, it features the 2ml full-view cartridge and adjustable airflow. It is compatible with Jellybox Nano Coil for RDL/MTL vaping.

Details:
1. Designed with style of the pager age
2. Supported by upgraded Jellybox 2.0 chip
3. Built-in 1000mAh battery, Type-C charging
4. 30W max output and adjustable airflow switch
5. 3-color smart LED lights and digital tube
6. Button pressing and auto draw vaping modes
7. Equipped with 2ml full-view cartridge
8. Compatible with all Jellybox Nano Coil

Hello all.
Does any one know where I can find the above kit? I have one already and have invested in a few pods and coils and I am trying to find another one for a back up when this one gives out. I would even like to pick up a used one if anyone wants to sell it to me ( I don't care about the color) just that it works.

Thanks for any help you can give me with this adventure

Melmak

Zovoo Dragbar F600 // Review by HyDrOpOnIc1987

Hello and welcome to my review on the Dragbar F600 disposable by Zovoo, which is Voopoo's sister company that focuses on disposables. I was give a few samples to review. I am hoping to provide a honest and fair review. I'll start by showing some promotional images and telling you about the disposables features and specifications. I will then tell you a bit about the flavours that I tried. I don't vape 20mg so I wasn't able to use all of these. I don't know anyone who vapes so I couldn't give anyone a used disposable, so I decided to give 2 of them to 2 people that were in need walking around town. I know it wont get them to quit, but it helps them for at least a day, maybe 2. I did try and finish a couple to completion, and that was very difficult lol I usually vape 3-6mg, depending on the day, stress levels and devices used. Ok, so now that that is out of the way, let's get to the review.


Promotional Images and Information



The Zovoo Dragbar comes in 10 flavours, which are:

Blueberry Sour Raspberry, Drag Bull Ice, Grape, Sour Apple, Sweet Strawberry, Watermelon Ice, Cola Ice, Kiwi Passionfruit Guava, Strawberry Ice and Pink Lemonade.






Features:
- Mesh Coil
- Compact Size
- Classic Drag Design
- 10 Flavours
- Multi-Layer Leak-Proof
- 600 Puffs
- 500 mAh Battery






Specifications:
Product Name: DRAGBAR F600
Size: 94.67 x 23.67 x 22,49mm
Weight: 31g
Nicotine: 20mg/mL, 9.8mg/mL, 0mg/mL
Capacity: 2mL
Resistance: 1.4ohm
Puffs: 600
Battery: 500mAh
Material: PC







Package Contents:
1 Dragbar F600 Disposable



Unboxing and Usage Highlights



I was sent 5 flavours to test and review. They are Drag Bull Ice, Watermelon Ice, Blueberry Sour Raspberry, Cola Ice and Pink Lemonade. I haven't used disposables besides the ones I have reviewed, so seeing how small the boxes are is still quite shocking. The front of the boxes are coloured roughly the same colour as the disposable within. On the top is says DRAGBAR F600, and under that is a picture of the device contained within the box. On that same picture is an award showing that they've won the Best Newcomer Winner 2022 award. Under that It has the flavour of the disposable and then a nicotine warning. Not for anyone under the ages of 19 (18 or 21 in other areas and countries as well, know your local tobacco/nicotine laws).







The first flavour I tried was Cola Ice. As a disclaimer, I don't like Cola flavours but have been dying to find one that really resembles a cold refreshing gulp of cola. Unfortunately, this was more of the same. I'm sure there are a lot of people out there that love cola flavoured liquids, but I haven't found one for me yet. That said, the flavour was similar to a discount cola and has a bunch of koolada which I assume is to mimic the cold and refreshing-ness of a can of Pepsi or Coca-Cola (don't come after me Big Soda, I'm too broke to matter to you…. I hope.) So if you usually like cola flavours, I'm pretty sure you will love this one.








The next flavour I tried was the Watermelon Ice. No disclaimer necessary, I LOVE watermelon. This was no exception. You get the watermelon right off the bat but it is mild and has a bit of a cucumber taste to it as well, on the inhale. On the exhale you have a righteous cooling effect (almost too much in my opinion. Made me cough at first a bit) along with a salty watermelon aftertaste. It's really really good, but the cooling (Koolada) could definitely be “turned down" a touch. This said, I really enjoyed this flavour and it was the one I managed to completely finish (took me a week because I couldn't vape it as my “only" vape, the nicotine was too high).



I wanted to show this, the 2 holes are important. The one that is closest to the front panel is a light. It lights up when you take a drag. The other hole is the airflow vent. This is where the disposable pulls it's air in from. Don't cover it while hitting or you will get dry hits and potentially burn out your disposable.

I also tried the Pink Lemonade flavour but somehow lost the pictures of it. Regardless, it looks the same in shape and is a kind of pastel pink colour. My apologies. I found this one to not taste like Pink Lemonade at all, rather it tasted like Pink Grapefruit. It's grapefruit from the beginning with cooling starting about 1/3rd of the way into your drag. I like grapefruit, but not enough to vape it as a solo flavour (I don’t consider koolada a flavour, if it had a mint taste then sure but its only the cooling effect).

I gave 2 away and was able to ask one of them how long it lasted him, he said it lasted 2 and a half days fairly heavy vaping. He kept getting headaches (nicotine overload) and couldn't vape it as much as he wanted. He still smoked occasionally through it. He got the Blueberry Sour Raspberry and said he really liked it. He said it wasn't very sour but you could definitely taste the berries. He said it also had a lot of cooling. I figure this is a common trend with disposables as all the ones I have tried to date have had some form of a cooling effect. The guy that I gave the disposable to said that if the cooling was slightly less, that the nicotine was offered in 15mg, he would use them when available. I would have to agree.

I would recommend these to anyone who is thinking of quitting smoking and looking at vaping as an option, but be aware of the cooling that seems to be in a majority of disposables. I would also recommend these to someone who maybe forgot their vape at home but has to get on with their day. These are perfect for those applications as they are only 2mL and you can decide whether you like the flavour or not, or will be home in a few hours and just need something small to hold you over.

I would like to thank Fiona at Zovoo for sending these to me for review. They were fun to try, and to give out. I would love an option in 10-15mg/mL but these ARE geared to pack a day or more smokers, and I'm a 6mg/mL freebase vaper so I don't truly think I was the intended target haha

I provided a link to both Zovoo’s website and the link for the F600 below. Please feel free to use them to gather more information or to make a purchase. I am NOT an affiliate so I do NOT make anything from sales. I get sent product to try and review, that's it that's all. So no need to use my links, but I wanted to be up front.

Zovoo's Website: ZOVOO By Your Side
Zovoo F600: DRAGBAR f600/f1000 - ZOVOO By Your Side

Thank you very much for reading my review. I appreciate each and every one of you. I hope you all have a wonderful morning/afternoon/evening/night.

Cheers!

It’s been a while since I’ve done a review for Lost Vape but here I am now with the new Centaurus M200 Mod Kit. I will do my best to provide you with a fair, honest, and hopefully informative review on this new mod. Like many other mods from Lost Vape it uses the Quest chipset but this one isn’t your usual three button setup like they have been using. It’s my understanding that you can buy just the mod or you can buy a kit with the mod and the Centaurus Sub Ohm Tank included. I was just sent the mod and that’s fine with me. I have plenty of tanks. The M200 has an output range of 5-200 watts while using dual 18650 batteries. The mod is made of aluminum alloy and stainless steel to give you a pretty lightweight device despite it being a little bit of a big mod measuring at 93 x 56.7 x 26mm. It has an output range of .7-10V so it does have buck boost for those that look for that in a mod. Both side panels are removable and can be swapped between sides or between different mods. It’s a fairly simplistic mod but is a powerhouse and has a really different way of controlling the output that I’ll talk about more later.









WHAT’S IN THE BOX?

1pc Centaurus M200 Mod
1pc USB Type-C Cable
1pc User Manual

SPECIFICATIONS and FEATURES:

Chipset: Quest 2.0

• Dimensions: 93mm by 56.7mm by 26mm

• Battery Compatibility: Dual 18650 Batteries - Not Included

• Wattage Range: 5-200W

• Voltage Range: 0.7-10V

• Resistance Range: 0.1-5.0ohm

• Temperature Range: 200°-600°F / 100°-315°C

• Wire Compatibility: Nickel, Titanium, and Stainless Steel

• Display Screen: 0.96" OLED Screen

• Chassis Material: Aluminum-Alloy & Stainless Steel

• Magnetic Battery Door

• Threaded 510 Connection

• Short-Circuit Protection

• Low Battery Protection

• Temperature Protection

• 10s Overtime Protection

INITIAL THOUGHTS:

The packaging for the Centaurus M200 is very nice indeed. On the outer sleeve is a really nice color picture of the device contained inside. The one I received is the Pink Planet. I’m assuming that the packaging for the other colors won’t have a pink background like mine does. On the back side is a list of contents, warning, authenticity code, and a bar code with the color version named on it.

Once the outer sleeve is removed then I was greeted by a very impressive black box. Well done Lost Vape! The front of the box has the Centaurus symbol in the center in gold surrounded by the words “Lost Vape M200” in a circular pattern around the symbol also in gold. Very impressively done.

The box top is split in two halves and once opened exposes the very nice Centaurus M200. I have to say that the pink version would probably have been my last choice but I don’t get to pick the color for review samples. I’m just thankful to have received a sample. There is also a USB-C charging cable included inside the box beside the Centaurus.

The two side panels of the M200 are identical besides one side having the Lost Vape name on it and the other has Centaurus on it and are both removable. They have a design stamped into the aluminum panels with the Centaurus symbols in the center in silver to make them stand out nicely. On the back side of each is two magnets to hold them on securely and there is no rattle.

Since I’ve included the battery side in the pictures, I’ll point out that there is a battery release strap that makes changing batteries easier and the Lost Vape name is printed on it. The battery polarity is clearly marked inside the compartment by having the polarity signs molded into the plastic so you don’t have to worry about the markings wearing off. The Lost Vape name is molded into the top of the opening and is marked on the side with “Designed and manufactured by Lost Vape “.

The third picture below shows the side opposite the battery compartment which is just a solid black panel once the pink side cover is removed. At the base you can see a notch cut out which the mod has on both sides to allow the user to get a fingernail under to pop off the side panel. I am guessing that Lost Vape will start selling different side panels to be purchased separately but don’t know that for sure.

The 510 connection on top of the mod is centered to allow up to a 26mm tank to fit with no overhang. The 510 connection plate is held in securely with three torx head screws. It appears to be made of stainless steel while the center pin is gold plated and spring loaded. I wonder if the three screws are secured underneath or just threaded into the aluminum body? The reason this came to mind is I know that aluminum is soft and if you overtighten a screw in it then it can strip the threads.

Now let’s take a look at the front of the mod. At the top is the 3-in-1 Jog Dial Interface. The M200 uses an upgraded Quest 2.0 chip so you won’t see the usual three button configuration that we’ve seen many times on Lost Vape mods. Instead there is a knurled ring that is a 360 degree rotational wheel (potentiometer) that you use to adjust the wattage by turning clockwise to increase and counter clockwise to decrease. The reason it’s called a 3-in-1 is that it is also a push to fire button as well as incorporating an LED battery level indicator. One of my first concerns was changing the wattage while pressing the fire button or handling the mod but you can press the fire button three times to lock the adjustment. The battery level indicator has five different colors which might confuse some. Luckily there are two battery level indicators on the display. The M200 is a wattage only mod. The display shows the following information.

• Two battery level indicators with percentages shown also
• Lost Vape name
• Set wattage
• Coil resistance
• Length of time of current puff
• Puff Counter

The M200 I received is a sample and does not include it but on production models there will be two different modes which are Normal Mode and RDA DIY mode. Below the display screen is a sideways sliding switch that can be used to turn the mod on or off completely. Slide to the right to turn it on and slide to the left to turn it off. Below that is the USB-C charging port.

The wattage adjustment on the M200 is not linear. It adjusts in three incremental steps as follows.

• 0-39 watts = 1W change
• 40-98 watts= 2W change
• 99-200 watts= 5W change

When you reach 200 watts then the mod will round robin by continuing to turn the adjustment wheel. The five different colors for the battery level indication on the LED ring are as follows.

• 0-20% = Red
• 20-40% = White
• 40-60% = Blue
• 60-80% =Green
• 80-100% = Purple(looks pink to me)

FINAL THOUGHTS:

I think that Lost Vape has done a very nice job on the Centaurus M200. From the very nice package to the well-executed appearance, the M200 is a powerhouse mod with minimalistic controls. I think that they realize that the majority of vapers use wattage output mode so after upgrading the Quest 2.0 chip they have delivered a wattage mode only mod and instead of the three button interface normally found with that chipset, they have designed the 3 in 1 Jog Dial Interface. This type interface allows the user to manipulate the controls with one hand and no need to press multiple buttons at the same time to access features. I received a review sample so it does not have the RDA Mode and cannot do the three presses of the fire button to lock the adjustment but production models will.

The two side panels of the mod are interchangeable and from what I understand, separate side panels will be available for purchase at a later time. It has a 26mm solid framing and the body and panels are made of aluminum to make it lightweight despite being a fairly large mod. I don’t have large hands so found the mod a little wide to hold at first but have quickly become accustomed to it. The protruding 3 in 1 fire button also took a little getting used to as I’m used to most mods where the fire button is nearly flush with the body of the mod.

So, would I recommend the Lost Vape Centaurus M200 for you? If you’re looking for a lightweight dual battery mod with a pretty darn cool fire button and what I consider to be nice aesthetics then yes I would. It’s a straight up wattage mod that does what it’s supposed to do and looks pretty cool while it’s doing it.

I’d like to thank Lost Vape and Bella for sending the Lost Vape Centaurus M200 for this review even though they sent a pink version. Just kidding. Also thanks again to the readers. Below is a link to the Lost Vape website for your viewing pleasure.

Centaurus M200 - Lost Vape

The Galex Nano comes in:
Blue
Black
Red Gold
Gunmetal
Pink Purple

Both kits have a light display, but they're displayed differently. The lights can also be turned off if that isn't of interest to you.

The Galex Nano's display is more 2-dimensional than the
Galex. Two quick clicks of the side button (this is not a
fire button) scrolls through the lights being Off, in Unicolor,
or in Multicolor. Unicolor slowly fades through each individual
color, while the Multicolor spins the colors in a circular fashion
around the display window.

Features:





The Pod:







I want to emphasize that the side button on the pod mod/battery for the Galex Nano IS NOT A FIRE BUTTON, regardless of how you see it advertised on various other sites. This button is used for quite a few purposes as listed above. Single clicks show the battery status, double clicks cycle through the lighting options, triple clicks changes the power setting, and 5 clicks allow you to turn the device off and on.

There's also a hoop built into one of the corners of the pod mod/battery for a lanyard, but the lanyard itself is not included in the Galex Nano kit.



Specs & Packaging:


Galex Nano Specs:
Size: 53 * 19 * 76.96 mm
Pod Capacity: 2 mL
Coil Resistance Options: 0.8 and 1.0 ohm
Battery Capacity: 800 mAh
Output Wattage: 11-22W
Output Voltage: 3.3V (Red), 3.5V (Blue), & 4.2V (Green)

For sale is a new, never used Uwell Whirll 2 tank. Includes the tank, 2 coils (one is installed in the tank; the other is in a sealed pack), spare glass, spares kit, drip tip and drip tip cover. Does not include a box (came with a mod and I don’t need the tank).

Price is $13 shipped via USPS First Class mail (US shipping only). Payment by PP F&F with no notes, mentions of vaping, etc.

Specs from the manufacturer:

25mm Diameter
3.5mL E-Juice Capacity
Superior 304 Stainless Steel Tank Construction
Curved Top Cap and Airflow Control Ring - Protects Glass
Quarter Turn Top Fill System - Single Fill Port
Uwell Whirl Coil Series
0.6ohm Dual Coil - rated for 18-22W
1.8ohm Single Coil - rated for 10-15W
Pro-FOCS Technology
Press-Fit Coil Installation
Dual Slotted Airflow Control Ring - 5 Bored Holes
MTL & DL Airflow
Threaded 510 Connection
510 Delrin Drip Tip

Not new to vaping but I figure I would join the forums and utilize the community a bit and conversate

I had stocked up on PG/VG/Nicotine when the talk about bans started. I've finally run out but My Freedom Smokes has apparently shutdown. Are there any trusted US suppliers people are using now in the DIY community?

I’m pleased to be back with you today to take a look at the third edition of the Vaporesso Xros and Xros Mini. Both were sent to me by Vaporesso in order to provide you with a fair and honest review. That being said, I have to admit that I may be a little biased as I have been using the Xros and Xros 2 for quite some time as a pocket carry at work. As a matter of fact I am still using the original Xros sample that I received for the review when it first came out. I have chosen to go ahead and combine the reviews for the Xros 3 and Xros 3 Mini since they are similar and the pods are interchangeable between them as well as being compatible with the Xros 2, Xros Nano, and the original Xros and Xros mini.

The Xros 3 has a 1000mah internal battery just like the previous version. The charging rate is 5V/1A. It comes with .6 and 1.0 ohm pods with a 2ml capacity. Both of these are new to me. In the past I have just used the 1.2 and .8 ohm pods. The .8 ohm pod has become my favorite of those two. The Xros 3 is dual activated with a fire button or auto draw just like the two previous versions.

The Xros 3 Mini has an internal battery of 1000mah also and of course the pod has a 2ml capacity as it is cross compatible with all other Xros devices. The Mini only comes with one .6 ohm pod and does not have airflow control or a fire button like the Xros 3. It is auto draw only.





XROS 3 COLORS

XROS 3 MINI COLORS

WHAT’S IN THE XROS 3 BOX?

1 x XROS 3 Battery

1 x XROS 3 0.6ohm mesh pod (pre-installed)

1 x XROS 3 1.0ohm mesh pod

1 x Type-C charging cable

1 x Reminder Card

1 x User manual and warranty card

WHAT’S IN THE XROS 3 MINI BOX?

1 x XROS 3 MINI Battery

1 x XROS 3 0.6ohm mesh pod (pre-installed)

1 x Type-C charging cable

1 x Reminder Card

1 x User manual and warranty card

XROS 3 FEATURES:

Dual activation - fire button activation or inhale activation

Airflow control slide, three levels

Top filling feature

Auto-cutoff

MTL & RDTL vaping

Dimensions: 13.7x23.6x115.1mm

Pod capacity: 2ml

Pod resistance: 0.6ohm/1.0ohm

Battery capacity: 1000mAh

Charging: DC 5V/1A, Type-C



Compared with the Xros & Xros 2: the Xros 3 have improved:

1. New 0.6ohm Pod: Premium RDL experience and fully compatible: XROS PODS from free base to nic salt.

2. Precise Adjustable Airflow: Support from MTL to RDL experience.

3. AXON CHIP Pulse Mode for power boosted and produces flavorful and denser clouds from the first to the last puff, 1000mah High Density Battery: Strong and longer lasting output.

4. The innovative COREX heating technology applied with unique COREX Cotton and MORPH MESH, ensures more rapid and even heating to provide sheer flavor accuracy from the first to the last puff.

5. Pod lifespan improves by 50%, lasting up to 20 days.

6. Perfectly Fit Your Lips: New Shaped Mouthpiece.

7. Modern look and better hand feeling: Rounded-edge Design.

8. Neon Battery Indicator.



XROS 3 MINI FEATURES:

1. Accurate Flavor, Lasting Longer.

2. New 0.6ohm RDL Pod, Fully Compatible with the XROS Series Pod.

3. SSS Tech, Anti Leaking.

4. 1000mah High Density Battery.



Brand: Vaporesso

Unit: 1 Set

Dimensions: 13.8 * 23.6 * 99.2mm

POD Capacity: 2m

Coil Resistance: 0.6ohm

Battery Capacity: 1000mah

Charging: DC 5V /1 A, Type-c

Display: 3 * LED Light

INITIAL THOUGHTS:

The packaging for the Xros 3 and Xros 3 Mini are similar. Both come in black and green boxes with a color picture of the actual device inside the carton. I received the Royal Gold version on the Xros 3 but honestly to me it looks like an orange fade. I’m not complaining, I really like the color. The Xros 3 Mini that I received is the Space gray version which I also like very much but am kind of favoring the Royal Gold one for a couple reasons.

The back side of each box has a specifications and contents listed as well as company information for Smoore(Vaporesso) and bar code with color version listed.









Once the outer sleeve is slid off of the Xros 3 then there is a black envelope that contains the user manual. Underneath is the Xros 3 in all its glory with the .6 ohm pod pre-installed. To the right side is the included 1.0 ohm pod in a foil pack and a USB-C charging cable below. It’s a little hard to tell from the picture but the Xros 3 came with a clear plastic wrap around it to protect it during shipping.



The Xros 3 Mini only comes with one .6 ohm pod. I know I’m going to sound like a broken record here but I just don’t agree with putting out a pod kit with one pod or coil included due to the fact that nothing is perfect and if the customer gets a bad pod with the device then it is useless if they didn’t buy extra pods. The Mini also comes with the device wrapped in plastic for shipping. There is also a USB-C charging cable sitting to the side. It is a basic starter kit.



Both the Xros 3 and the 3 Mini have a 1000mah battery built in. The 3 is smooth to the touch but doesn’t show fingerprints while the front of the Mini is textured on the front much like the previous version of the Mini. The Xros 3 can be fired with the button on the front or can be used in auto draw while the Mini is auto draw only and does not have a button. The fire button on the Xros 3 has a double circular design and has a silver edge if you look at it from the side. It really is a nice looking design. Each of them has the Vaporesso name on the front. The Xros 3 and the Mini each have a light bar at the bottom that illuminates to display the battery level but also cycles through different colors while the device is activated. There are three different color indications for the battery level as follows.

• Green = 70-100%
• Blue = 30-70%
• Red = 0-30%

Both also have the Vaporesso “V” logo design on the back but the Xros 3 has the adjustable airflow control on the back which is why I prefer the Xros, Xros 2, and now the Xros 3 to the Mini series of pods. Airflow control is an important feature to me.









There is an airflow inlet hole on both sides of each of the bodies near the top. The charging port for each is located on the bottom just like previous versions of each of them. The charging rate on each is 5V/1A so should be able to charge each in about an hour.

Hello and welcome back for my review of the Argus P1 Pod Kit from Voopoo. The Argus P1 is what simplicity is all about in form and function with a feature that lets it be button free while determining the correct adjustment for each vape, while still allowing a fully adjustable airflow control for the user. I think this is the most attractive Pod Kit in this size class I've come across and think you will agree also. Before I give you my impressions on the Argus P1 Pod Kit lets check out some information on it.




COLOR CHOICES





IN THE BOX


* 1pc Argus P1 Device

* 1pc Argus Pod Empty Cartridge

* 1pc ITO-M1 0.7ohm

* 1pc ITO-M3 1.2ohm

* 1pc Type-C Cable

* 1pc User Manual

* 1pc Lanyard




PARAMETERS AND SPECIFICATIONS

* Size: 74.6*46.7*17.4mm

* Output Power: 5-20W

* Capacity: 2ml

* Resistance Range: 0.5-3.0Ω

* Output Voltage: 3.2-4.2V

* Battery: 800mAh Built-in Battery

* Material: Zinc Alloy + PC

* Compatible Cartridges: ARGUS POD Cartridge 0.7Ω/1.2Ω





FEATURES


• 800mAh Built-in Battery

• 5-20W Output

• 2ml Vape Juice Capacity

• VOOPOO ARGUS POD Cartridge 0.7Ω

• VOOPOO ARGUS POD Cartridge 1.2Ω

• Zinc Alloy&PC Construction

• PD Fast Charging

• Futuristic Mechanical Style

• AI Output Adjustment

• ITO Atomization Technology

• Patent Leakage-Proof Design

• Airflow Adjustment


LEAKPROOF POD





COMFORTABLE MOUTHPIECE





TURBULENT FREE SMOOTH AIRFLOW





VERY GOOD FLAVOR





ARGUS POD COMPATIBILITY





FULLY ADJUSTABLE AIRFLOW

The VPro New JELLY 5000 is a box disposable vape device with an appealing color design that has gained popularity very quickly! It holds 16ml of 5% nicotine salt e-liquid and delivers up to 5,000 puffs. It is also equipped with a formidable 1.2ohm Mesh Coil, which will give you the satisfaction of dense vapor clouds and the right amount of nicotine.

Key Product Features:

5000 Puffs
Strength: 50mg
E-Liquid Capacity: 16mL
1200mAh rechargeable battery
Mesh Coil
USB-C Charger ( NOT INCLUDED!)

The 1200mAh built-in battery can last for a full day of use, and it can be quickly charged using the Type-C port at the bottom. VPro Jelly disposable vapes near me is super competitive and affordable compared to similar devices, and boasts 12 delightful flavors to choose from! Get one today and enjoy!

You may also like:

caliburn vape price
flum rechargeable vape Texas

Lost Vape Centaurus M200 is a device powered by dual 18650 batteries with a maximum power of 200W. The shell is made of aviation-grade aluminium alloy, which makes the device more durable. The panels on both sides can be replaced at will if you are after a more stylish appearance.


There's a fire button on the right side of the unit that not only quickly starts the unit but also locks the screen, plus an LED indicator that shows the battery level by showing 5 different colours.

The 0.96" OLED screen can display a variety of data, and the screen provides you with RDA DIY Mode and Normal Mode for you to choose freely. There is a toggle switch at the bottom of the screen, you can quickly achieve the smoking experience by fluctuating left and right. Help save power.

Three protection functions, including short-circuit protection, weak battery protection and overheat protection, can greatly ensure the normal operation of the device.
Although the Centaurus M200 vape mod kit looks heavy as a whole, its real weight is only 150+g, which is definitely convenient for you to carry.

Features
• Aluminium-Alloy & Stainless Steels Construction
• Unlimited Combination
• Dual-side changeable face panel
• 3-in-1 Jog Dial Interface
• 5-200W Output
• Powered by Dual 18650 Batteries (Not Included)
• Compatible with Lost Vape UB Max Coil Series
• 5mL Bubble Glass Capacity
• Feather Light 150+g
• 5 Different Bright LED Colors
• On/Off Toggle Switch
• 26mm Solid Framing
• QUEST 2.0 chip

I'd like to suggest:
geekvape l200 classic
uwell crown d pod mod kit

Hi, today let's take a look at the Vaporesso Xros 3 & Xros 3 Mini. In this Test I will examine each of the characteristics that distinguish these items. I hope that by the end of this reading you have understood these products, and therefore decide whether to invest in them or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► Vaporesso Xros 3 & Xros 3 Mini; Before starting let's see together some special features indicated by the manufacturer:
• XROS is by far one of the best-selling pod systems, XROS 3 and XROS 3 MINI are the new premium products
• COREX heating technology ensures better flavor and longer pod life
• New 0.6Ω pod added to XROS series PODS
• AXON CHIP PULSE MODE to provide strong output for the 0.6Ω pod
• Precise airflow adjustment from Tight MTL to RDL
• Fully compatible with all XROS PODS (0.7 / 0.8 / 1 / 1.2Ω)
• Newly shaped mouthpiece to offer a better MTL experience and to better fit the lips
• Neon battery indicator for better display of battery charge level
• XROS 3 uses original SSS leak resistant technology
• Top filling system
• 1000mAh high density battery for a long lasting experience.
• XROS 3 With dual activation mode and adjustable AFC for MTL / RDL
• XROS 3 MINI, is simpler for novice users.



► Vaporesso Xros 3 & Xros 3 Mini; Packaging:
Both packs are black / green, have different sizes, but maintain the same configuration as regards the arrangement of the information. Previously you find; the brand (Vaporesso), the image of the device and the name XROS or XROS 3 MINI. On the back of the package there are; specifications, packing list, manufacturer addresses, bar code, kit coloring, trademarks and logos required by law. On the remaining sides of the box are; scratch & check and the main features in the form of icons.





► Vaporesso Xros 3; Packing List:
• 1 Mod Xros 3
• 1 Xross 3 Pod with 0.6Ω mesh coil (2ml)
• 1 Xross 3 Pod with 1.0Ω mesh coil (2ml)
• USB Type-C cable
• User Manual
• Warranty card
• Warning card

► Vaporesso Xros 3 Mini; Packing List:
• 1 Mod Xros 3 Mini
• 1 Xross 3 Pod with 0.6Ω mesh coil (2ml)
• USB Type-C cable
• User Manual
• Warranty card
• Warning card



► Vaporesso Xros 3; Specifications:
• Dimensions: 13.7x23.6x115.1mm
• Weight: 43g
• Battery: 1,000mAh
• Construction material: SUS304 and PCTG stainless steel
• Charging: Type C, 5V / 1A.
• Charging time: 45 minutes
• Capacity: 2ml with PCTG clear pod
• 3-color LED battery indicator
• Automatic puff or with button of your choice.
• Adjustable air flow
• Leak-free clamshell top fill
• Axon Chip with multiple protections for safety
• Compatible cartridges: XROS, XROS 2, XROS NANO XROS Mini

► Vaporesso Xros 3 Mini; Specifications:
• Dimensions: 13.8x23.6x99.2mm
• Weight: 37g
• Battery: 1,000mAh
• Construction material: SUS304 and PCTG stainless steel
• Charging: Type C, 5V / 1A.
• Charging time: 45 minutes
• Capacity: 2ml with PCTG clear pod
• 3-color LED battery indicator
• Automatic puff.
• Leak-free clamshell top fill
• Axon Chip with multiple protections for safety
• Compatible cartridges: XROS, XROS 2, XROS NANO XROS 3



► Vaporesso Xros 3 & Xros 3 Mini; Available colours:
The colors available are the same for both devices.
• Black
• Navy Blue
• Space Gray
• Icy Silver
• Sky Blue
• Rose Pink
• Royal Gold
• Mint Green



► Vaporesso Xros 3 & Xros 3 Mini; First Impressions:
The Xros family expands with two renewed kits; one has the dual activation mode and adjustable afc and is XROS 3, the other has a fixed regulation of the air passage with the only automatic activation mode of the puff and this is XROS 3 Mini which is more suitable for beginners. These are two extremely portable Pod devices with compact dimensions and identical 1,000mAh battery. XROS 3 weighs 4 grams more, and is slightly taller than Xros 3 mini. Although these are two entry-level devices both seem well made and well finished, but this is to be expected from a manufacturer like Vaporesso which since its foundation in 2006 has been appreciated in over 60 countries and regions around the world by establishing substantial leadership of the brand in Europe, America and emerging markets.



► Vaporesso Xros 3 & Xros 3 Mini; How they are made:
In the image below you can see the slight dimensional difference between XROS 3 and XROS 3 MINI, this difference is due to the fact that the internal mechanics of XROS 3 include the power key which is slightly more bulky, while XROS 3 MINI with the only automatic mode has smaller internal mechanics, so its body size is also smaller. With XROS 3 you can turn on / off the device with 5 quick clicks on the button, vape indifferently with the help of the button or automatically. While with XROS 3 MINI you can vape directly and without the aid of any buttons.



► Vaporesso Xros 3 & Xros 3 Mini; Operation Guide:
* Both devices use an LED indicator to check operation and to identify their charge level as follows:
• Green LED the battery charge level is between 70 and 100%
• Blue Led the battery charge level is between 30 and 70%
• Red LED the battery charge level is between 0 and 30%

* Both devices have the following safety protections:
• Cut-off protection
• Overload protection
• Short circuit protection
• Low voltage protection
• Open circuit protection
• Overload protection
• Resistance protection
• Overvoltage protection



► Vaporesso Xros 3 & Xros 3 Mini; AXON CHIP:
I think they will both work well, also because Vaporesso's famous Pulse Mode promises Top performance and taste. XROS 'extensive disposable pod platform includes solutions suitable for both restricted MTL use and loose MTL use. The chipset is also able to develop a high power for the best operation of the 0.6Ω cartridge included in both kits.



► Vaporesso Xros 3 & Xros 3 Mini; AFC:
In reality XROS 3 MINI does not have air flow regulation, the passage of air towards the coil occurs only through two small opposing holes which, among other things, are also present on XROS 3. These two holes allow an MTL extraction of restricted type on both KITs.



The true AFC system is additional and is therefore only present on XROS 3, the sliding button that adjusts the opening of the AFC if it is opened allows an additional inflow of air for very tasty RDL extractions, especially when they are combined with the 0.6Ω cartridge. With the AFC system closed, XROS 3 also takes the air through the two small fixed side holes and in this case the MTL extraction is equivalent between XROS 3 and XROS 3 MINI.



► Vaporesso Xros 3 & Xros 3 Mini; Above under:
The Cartridge compartment on Xros 3 & Xros 3 Mini features two magnets, two pins, ducted air ducts and a small sensor that creates the necessary vacuum for automatic shooting. The type-c charging socket is located on the bottom, always on the bottom there are the legal logos and the battery capacity which is 1,000mAh.



► Vaporesso Xros 3 & Xros 3 Mini; XROS 3 Cartridges:
The disposable cartridge XROS 3 with its two magnets mirroring those present in the compartment / pod fits into the mod in a simple and stable way. In the XROS 3 kit there are two different cartridges, one of 0.6Ω and one of 1.0Ω. What I would have preferred is that XROS 3 Mini also had two cartridge options, but in the XROS 3 MINI kit there is only the 0.6Ω cartridge, this is very strange because XROS 3 MINI only works in MTL mode and the 1.0Ω cartridge it would no doubt have been more suitable.



The cartridge contains 2ml of e-liquid and is built in transparent PCTG, the special refill system called "shell pod opening" guarantees excellent sealing and speed in the refueling operation. The nozzle is comfortable for the lips and has an internal hole of about 2mm, the multilayer silicone inside the cartridge prevents leaks, furthermore, with the ultrasound processing of the airways, reliability and the correct supply of air towards the coil.



Another thing I really like about the XROS line is that the new cartridges are compatible with all previous XROS devices, so we have several choice options for cartridges.



► Vaporesso Xros 3 & Xros 3 Mini; Vaping test & final conclusions:

• Xross 3 Pod with 0.6Ω (2ml) mesh coil:
You will find this sub-ohm cartridge included in both kits both by purchasing XROS 3 and by purchasing XROS 3 Mini, but you will get maximum RDL performance only with XROS 3 which is equipped with the additional AFC system, the vapor clouds ( with open AFC) are dense and abundant, with an excellent flavor yield with creamy and fruity liquids. Unfortunately XROS MINI is less suitable to support the RDL vape, because the two small side holes of the fixed type are able to carry a restricted air flow and of the MTL type only. However if you are a lover of hot steam and the hit in the throat you will find the 0.6Ω pod paired with XROS MINI quite interesting.

• Xross 3 Pod with 1.0Ω (2ml) mesh coil:
Perfect for MTL, this mesh coil cartridge is excellent if used on XROS 3 with AFC fully closed, unfortunately it is not present in the XROS 3 MINI package, but I have tested it and it guarantees a very good narrow MTL vape even on the XROS 3 MINI , the steam is lukewarm and the taste is confirmed as good with creamy liquids.

Essential, practical and economical but also extremely robust, these are the Xros 3 and the Xros 3 Mini by Vaporesso. The AXON chip with pulsed mode guarantees performance that until recently was unthinkable with disposable pods like these. Plus, the 1,000mAh battery life is long and the charging time is short. Not having encountered any inconvenience, I can safely recommend Xros 3 & Xros 3 Mini because currently in their (mod + disposable Pod) category they are among the best entry-level kits on the market.

I would like to thank Danny from Vaporesso for providing me with the kits. I hope this review was useful for anyone looking to buy Xros 3 & Xros 3 Mini.


Thanks for reading.

XROS 3 Kit is the new pod system in vapesourcing. It is equipped with a new 0.6ohm mesh pod to provide you sweeter vaping experience. And the new 0.6ohm pod is compatible with the whole XROS family. XROS 3 features 1000mAh battery and type-c charging port. What's more, with COREX Heating Tech, it can offer more rapid and even heating. It supports Pulse Mode to boost the power and flavor. Featuring SSS leak resistant tech and top filling system, XROS 3 is more convenient for you to use.

Packed with a 1000 mAh high-density battery, the XROS 3 provides users with a solid and reliable vaping solution that can be used for 48 hours on a single charge. Type-C charging ensures greater convenience, while the draw activation ensures the product won't malfunction in users' pockets.

The Vaporesso XROS 3 comes with a sleek rounded design that ensures the mouthpiece fits perfectly between the user's lips, providing an accurate MTL experience. The round-edge bottom of the vape delivers a modern and timeless design. Additionally, the neon indicator to show how much battery power is left combines aesthetics with function to provide users with comfort and practicality.The XROS 3 also features the COREX Heating technology for rapid and even heating, a precise adjustable airflow, and VAPORESSO's SSS technology to prevent leakage. In addition to no leakage, the design means users can top-fill the vape without needing to remove the head, allowing them to easily switch between Tight MTL to Restricted DTL pods.

Specifications:
Brand: Vaporesso
Dimension: 13.7*23.6*115.1mm
Vaporesso XROS 3 Pod Cartridge Capacity: 2ml
Resistance: 0.6/1.0ohm
Battery Capacity: 1000mAh
Charging: 5V/1A, Type-C
Filling System: Top filling

Features:
Precise adjustable airflow
Pulse mode
Powerful boosting
New 0.6ohm RDL pod
SSS tech and anti-leaking
1000mAh battery capacity
Provides tight MTL to RDL vaping
Compatible with all XROS pods
COREX heating tech
Flawless rounded-edge design
Neon battery indicator



Recommended products:
voopoo argus p1
XROS 3 Mini kit

Many vapers have asked in the comments where to buy high-quality vape kits, then uk vapesourcing must be a good choice, not only has high quality products, but also a series of after-sales services can also guarantee your purchase rights , and enjoy the best buying experience. Today, I would like to recommend a new product to everyone. You can also enter the store to view the details.

Vaporesso XROS 3 Mini Pod Kit has a beautiful design with a gorgeous diamond pattern on the surface to enhance friction and grip, and there are 8 brilliant colors to choose from. The fuselage does not have any complicated button design. When using it, you only need to inhale to activate the device and start your vaping.

The 1000mAh built-in battery is used as the power supply base of the device, which can support nearly 2 days of use. The performance of the device will not change due to the power, and it can always maintain a stable output environment. There is also a neon light design at the bottom of the device, which can always remind you of the actual power of the device so that you can charge the device in advance.

The device is compatible with XROS pod and has SSS-level leak-proof technology, providing users with a clean and tidy environment and a great experience.

Features
· Designed for aesthetics
· Rounded edges for a modern appearance
· 2ml Pod Capacity
• Built-in 1000mAh Battery
• Compatible With All XROS Pods
· Morph mesh structure
· SSS technology
• Top Filling System
• Neon Battery Indicator
• AXON Chip
• MTL&RDL Vaping
• Morph-Mesh Structure
• Flat Mouthpiece

We will share with you：
caliburn a2s
eleaf istick p100 cartridge

Hello,

I'm having problems getting any flavor out of my (authentic) Kayfun. It's my first rebuildable and I feel like I've tried everything, I've wicked it close to 50 times and changed ~10 coils and I just can't get it right. I've watched about every single video on YouTube about it and they all seem to have a different method, yet I just can't get it right.

I got it right one time, and that was on my first ever build, however it was popping and crackling so much that I figured it wasn't normal. I eventually found out that was because of a broken o-ring in the chimney which I now have changed. I'm guessing that caused it to wick very efficiently? However, even if I use it as a dripper it's muted, which leads me to believe it's not a wicking problem. I don't get dry-hits and it's never leaked.

There's no off-taste, I get good amounts of vapor, but it's always just muted.

I keep my (2.5ID) coils 1mm-2mm (closer to 2mm) above the airflow. I only have 28g kanthal wire and I've tried both contact and spaced builds, 5-8 wraps. I've tried various thickness of the cotton. I vape at 12-16 watts, depending on the ohms.

I've used cotton bacon prime, but now I'm using BP Mods Pro cotton 2.5mm as I feel like it's easier to be consistent with.

What can I be doing wrong? This tank surely can't be this finicky, when most of the reviews says it's easy to build and they all seem to have a different way of building and wicking it. I should have got it right by accident by now. It's not vapers tongue and it's not the juice as it gives me great flavor in my Zlide tank.

It's the 22mm tank and I'm using the 4ml cap.

Any suggestions would be greatly appreciated, suggestions for 28g kanthal coil builds etc, so I can eliminate at least one of the variables while troubleshooting my building and wicking. I'm so close to giving it up and buying a pod.

GeekVape L200 (Legend 2) Classic Kit

L200 Classic Kit is the new Legend 2, new power beast. It features new tri-proof tech for more excellent durability, supports dual 21700/18650 battery to provide long-lasting battery life and 5W-200W power range. In addition, with the Boosting Mode, L200 Classic can automatically adjust the max output for the max clouds. The accidental press protection lock is added to make L200 Classic safer to carry. Equipped with GeekVape Z Max Tank that features 6ml e-juice capacity, top airflow leakproof design, it will provide you max performance. We recommend you to use tank which base diameter is within 33mm to avoid overhang.

Details:
1. New legend 2, new power beast
2. External dual 21700 battery
3. IP68-rating water & dust resistance, shock resistance
4. Top airflow leakproof design
5. 200W power output
6. Boosting mode, 1.08 inch full screen
7. Accidental press protection lock
8. A battery converter
9. Equipped with Geekvape Z Max Tank




GeekVape L200 (Legend 2) Classic Mod

L200 Classic Mod features new tri-proof tech for more excellent durability, supports dual 21700/18650 battery to provide long-lasting battery life and 5W-200W power range. In addition, with the Boosting Mode, L200 Classic can automatically adjust the max output for the max clouds. The accidental press protection lock is added to make L200 Classic safer to carry. We recommend you to use tank which base diameter is within 33mm to avoid overhang.

Details:
1. External dual 21700 battery
2. IP68-rating water & dust resistance, shock resistance
3. 200W power output
4. Boosting mode, 1.08 inch full screen
5. Accidental press protection lock
6. A battery converter

Looking to add to my Topside 90 watt single battery stable. Must be in excellent condition and have all the packaging.

If you have one just taking up space please let me know!

Packaging: 10ml aroma
Manufacturer:England
Recommended blend ratio: 10-20%

I've brought you a beverage flavouring, a popular orange soda that everyone knows. You can smell the carbonated orange juice in the aroma alone, which tells you that this is going to be a sweet and for me, not an all day soup. It's not that I don't like the sweeter flavours, but I can't drink the soda itself all day. Going in you get a strong and sweet orange flavour that saturates you quite nicely. And on the way out, the soda appears, almost bubbling at the end of your tongue as you drink the drink. I mixed the flavouring at 10%, but it was still quite sweet. If I compare it to the original soda, it has about twice as much sweetener and therefore you don't really get the acidity of the orange. After two or three tanks, the sweetness overpowers the orange, which gets a bit stale in your mouth. I can't imagine anyone mixing this at 20%, I think that would be very unhealthy. I wouldn't say it's not delicious, I just have a problem with the proportions. It does give back the refreshing taste, smell and carbonation, but it's very over-sweetened. It's typical of the taste that after the first tank you say "yeah, that's it, strong flavours, very tasty" then the second tank "yeah, not bad" but you only quietly comment on that, by the third tank you're letting it go "it'll be good in a few months" - trusting it will be good

If you like the tests and want to support me to do more tests, feel free to contact me.