I've been slammed by the nanny state of Maine! I can't find anyone who will ship to Maine, and I'm in dire need of a new mod. I'm disabled and cannot drive, or I'd just go to a vape shop. Does anyone know of vendors who can and will ship here?

Review:

So for todays review we have the Kumiho Model V. I got it in Gold Pink but it comes in other colors such as Blue Gunmetal Black Red and silver. It also comes in 2 package options the Lite version and the Gift Box version. The differences between them will be listed below. Now for the review. Its lite which is nice, its easy to care for which is also nice. But the fill port is flimsy and i wound up having to use the spare pod as my fill port closure came of almost immediately which kinda sucked but wasn't too much of a deterrent imo. Its got a pretty good flavor and some decent cloud production. The magnet that holds the pod in place is just as strong as the other brands out there. And the build quality aside from the pod is just as good too. With its innovative vibration interaction, you will know it is ready to vape when the pod connected.

Features and Such:

1. Build-in 600mAh battery
2. 2ml refillable empty transparent pods: 0.6ohm & 1.0ohm
3. Patented coil cotton design for 0.6ohm pod for quick eliquid transmission
4. Innovative vibration interaction when the pod connected
5. Super easy to use with auto draw
6. Adjustable airflow for accurate RDL & MTL vaping
7. Pre-filled pods are also available, sold separately
8. USB C charging port

Brand: Kuiho
Unit: 1 Set
Materials: Aluminium Alloy, PCTG
Size: 119mm x 22mm x 11.5mm
Color: Black, Blue, Red, Gunmetal, Pink Gold
Battery capacity: 600mAh
Output wattage: 18W max
Pod capacity: 2ml
Pod resistance: Meshed 0.6ohm(14-18W), Dual Coil 1.0ohm(11-13W)
Package: Gift Box

Each set contain:

Gift Box Version:
1pc Kuiho Model V Device
1pc Model V Empty Pod 0.6ohm (14-18W)
1pc Model V Empty Pod 1.0ohm (11-13W)
1pc User Manual

Lite Version:
1pc Kumiho Model V Device
1pc Model V Empty Pod 0.6ohm (14-18W)
1pc User Manual

My Verdict:

Pretty good pod for the cost. The haptic feedback is nice to soo i know when my pod is connected.

Hello everyone,good to come here,would like to know more about e-cigarette information

Prizes:
2*SMOK NOVO 5 Kit
2*SMOK NOVO 2C Kit

We'll have 4 Winners.
The first 2 winners will get the SMOK NOVO 5 Kit,
the second 2 winners will get the SMOK NOVO 2C Kit.

All the entries are optional.
Enter here

Hello everyone, today I want to bring you the aspire cyber x. The first thing that catches your eye is its very modern and advanced design. I don’t know if you know about other cyber series, but this one is quite eye-catching. It adopts a relatively square design, after all, it is light and can be taken out at any time.

The side of the device uses a fire button. In addition to being activated by the button, you can also directly inhale and activate it. There is a built-in 1000mAh built-in battery for power supply. You can quickly charge it through type-c 2A, and it can be fully charged in about 20-30 minutes at the fastest, saving time and worry.

In addition, an indicator light is added for you on the aspire cyber x. When the indicator light is on, it indicates that the automatic suction is activated, and when the right indicator light is on, it indicates that the button is activated. If the left and right lights are on at the same time, it means that the button is activated at the same time as the inhalation.

Aspire is compatible with a 2ml pod, which is easy to fill from the side, of course, you can also fill directly by peeling off the top cap, which is easy to fill and excellently prevents leakage. Of course, if you want to realize the conversion of airflow, you only need to reverse the direction of the pod, and you can easily realize the conversion from MTL to RDTL.

Since the coils are not replaceable, you only need to pair them between the 0.8ohm and 1.0ohm pods. The intelligent ASP chipset provides you with six protection modes, including vaping overtime protection, short circuit protection, overheating protection and so on.

I think this smart device deserves some recognition, and you can find more details at some cheap vape stores.

You may like:
aegis boost pro 2
novo 2c smok

The Proxy is a first-of-a-kind modular Vaporizer Vape that is compatible with any type of extract such as wax, dabs, shatter, or crumble.

The Proxy features Puffcos advanced 3D ceramic coil, which, if you look closely, you will be able to see the heating wire embedded into the walls of the coils.Unlike traditional coils, which get their heat only from the bottom, the heat here comes from all directions.

This heating system, coupled with precise temp control, prevents the extract from boiling off before you actually draw. This system creates consistent, predictable results.

Unlike a vape pen, Puffco Proxy Vaporizer has a large mouthpiece that allows the vapor to cool down before inhaling it.Heat rises, and the design of the Proxy allows the excess heat to dissipate into the air instead of into the mouthpiece or into your face.Traditional pipes have been taking advantage of this design for a long time. It’s been time-tested and proven to work. Puffco didn’t invent the wheel here. They just modernized it.



Recommended products:
best ejuice
tobacco flavored vape juice

Dear valued customers,

Here comes Healthcabin new round of giveaway in February.

We are now partnering with VOOPOO to giveaway the new-released VINCI 3 Kit with 5 winners in total. Ends on 19th Feb. How do you like it? Wanna test it for free? Here is the chance!

Come join us and win it home!

Prizes:

VOOPOO VINCI 3 Pod Kit – 5 Winners

*If you are luckly to win, you will get one of the colors randomly.

About VOOPOO VINCI 3 Pod Kit​

The Voopoo VINCI 3 Mod Pod System, offering an internal 1800mAh battery, 5-50W output range, and uses some new additions to the PnP Coils Series. Constructed from durable zinc-alloy, the chassis of the Vinci 3 Mod Pod is lightweight and slim, making it extremely portable. Fitting neatly within the bookbag, purse, or pocket, the Vinci 3 does not sacrifice in the performance department, packing an 1800mAh battery inside the small chassis. Holding up to 4mL within the refillable pod, the Vinci 3 calls upon the host of PnP coils to deliver flavorful MTL vaping or large clouds of flavored vapor via DTL vaping. Visually striking and with function to match, this is the next pod system that will make its way into your collection.

Join & Win​

Finish the tasks below and win the VINCI 3 Kit home easily. Good luck to you all!!

If you cannot load the contest table below, please click here to join.

Please click here to join: HealthCabin Giveaway or VOOPOO VINCI 3 Giveaway | HealthCabin

This thread is intended for people to provide their input as to whether they prefer sub ohm tanks that house factory coil heads or whether they prefer rebuildable RTA /RDA tanks and WHY do you prefer one over the other.

I am a mid to high wattage vaper most (which is most of the time) and whenever I am out and about then I will slap on one my MTL tanks.... When I first started vaping (lots of years ago) there was not a vast array of atomizers where a bit of power could be put to them. Then the mid powered sub ohm tanks started appearing with the rollout of the Atlantis.... I had owned several sub ohm tanks and tried many of them but was never impressed with the flavor. So in the old days, I stuck with rebuildable RDAs and rebuildable RTAs even though I was not too impressed with many of the RTAs of that time period. Times sure have changed though with RTAs (for the better)....

Because the first sub ohm tanks were nothing special, I avoided them and stuck with RDAs and RTAs.... Also, and just as important, the other reason was the low cost of operating a rebuildable RTA/RDA verses a sub ohm tank in which I had to purchase their factory coils. Not only that but if the tank gets discontinued and you can no longer get coils for it then you are tough out of luck...

So, because the early sub ohm tanks were fairly low powered and didn't have the best flavor in the world (generally speaking) then I shyed away from them... But many sub ohm tanks started coming out with factory mesh coils that could handle higher wattages...

Just recently I purchased a SMOK kit for the mod. The mod came with a TFV 18 MINI tank but I was not in the least interested in the tank due to it using factory coil heads and so I set it aside for a few days. Plus the TFV 18 line of tanks have always been known to be "airy" (they still are) and their flavor was often diluted due to the massive airflow.... However, out of curiosity I decided to try the new tank and to my utter surprise I was blown away by the intense flavor those coils produced. The flavor rivals that of my RDAs, if not even better. I was shocked because the SMOK tanks of the past that I have used did not have too swift of flavor.

Another great sub ohm tank I own for flavor is the Fireluke 4.... It's not as good as the TFV 18 mini but pretty close....

So, it seems that these newer mesh coil heads in the sub ohm tanks are getting very good.....

So join in this thread and share what type of atomizer you prefer and why..... Anyone else getting the great flavor off of the Smok TFV 18 mini like I am? The Fireluke 4? I would like to hear about what other sub ohm tanks are producing good flavor.

I recently bought the Argus XT and the Drag 4
When I first got them both, everything was all good and behaving like they should, but recently my Argus XT feels like I'm drawing on 20 watts on my 80 watt coil.
Switching the tanks over, the one that was on Argus XT fires like it should on the drag 4, so it's definitely related to the mod.
I've tried different batteries and its always hovering around 2V's even on fully charged batteries (The batteries are fine in other mods). And it does also seem to jump around the voltage between 1.9 and 2V while drawing.

If anyone has any ideas it would be much appreciated as it's a great mod for out and about use. (The Drag 4 likes to go off in my pocket)

Riot Squad - Punx Strawberry, Blueberry & Raspberry
Producer: England
And here's another "squad" which would be a sweet mix of strawberries, blueberries and raspberries. Not only 'would be' but is. This is the third in the series that I've had the pleasure of trying and all of them have very similar flavours. As in the previous flavours, it is the effervescence that dominates combined with the juicy fruity flavours. Out of curiosity, I started the test without reading the description of what was in it. I could only identify the raspberry, not the other two fruits. The scent is pleasantly fruity, but here again I only smell raspberries. On the inhale, the sweet raspberry and the usual effervescence carry the line. And on the exhale, it's a rather sweet, multisweet fruit drink that pinches the end of your tongue with the effervescence. Of the three fruits, raspberry is the only one that dominates more, but the other two are there too, but they kind of hit each other so you can't really taste them separately. There's also a hint of coolness smuggled in, as if you've taken it out of the fridge. It's not in the description, but it's faint. Overall, it totally delivers as described, very subtle and powerful flavours, with a tiny bit of spiciness to add a little something extra as I described with the rest of the series.

Thought i would do something nice and make a playlist of my all time favorite romantic songs.
Wish you all the best in company of your significant other

Hope you like my selection:

Login to view embedded media

Hello again. It’s been a little while since I’ve done a review for Lost Vape but here I am again with yet another device to attempt to provide you with a fair, honest, and informative review. This time I was sent the Ursa Baby Pro by Lost Vape. The Pro is a top tier level pod system. What seems like quite some time ago I reviewed the original Ursa Baby. The Pro is obviously an upgraded version of the original. For starters, the original had a maximum wattage of 18 while the Pro has a maximum of 25 watts. Also the original had an 800mah battery while the Pro has a 900mah battery. It’s not a huge increase but more battery is always a plus or as some might say “more battery is more better”. The original was made from a clear plastic but the Pro is made of zinc alloy to give it an extra level of toughness while also improving the appearance in my opinion. The Pro also comes with two cartridges. The Pro does have adjustable output of 5-25 watts with a display screen and uses the Quest chipset. It only has one button which performs a couple different features and the Pro can be button fired or used as an auto draw device. One has a built in coil that claims a 50% improvement in lifespan and flavor production while the second is an empty pod where you can change the coils only and one coil is included. The Pro even has a sliding airflow adjustment. What more could you ask for on a pod device? Probably very good flavor would be what I would ask for. If this new pod holds true to the promise made then I have a feeling it will deliver since I remember liking the original Ursa pods and coils that are compatible across the Ursa pod line.





WHAT’S IN THE BOX?

1* Ursa Baby Pro Pod Device
1* Ursa Empty Cartridge
1* 0.6ohm Ursa Cartridge
1* UB Mini S1 Coil 0.8ohm
1* Type-C Charging Cable
1* Lanyard
1* User Manual
1* Warranty Card

SPECIFICATIONS:

Dimension: 46.5*15.2*71.6mm

Tank Capacity: 2.5ml

Battery: 900mAh

Battery Voltage: 3.2V-4.2V

Power Range: 5-25W

Body Material: Zinc Alloy

Chip: Quest Chip

Output Voltage: 1.7V-3.9V

Display: 0.42 inch OLED screen

Charging: Type-C, 5V/2A

Airflow: Easy access airflow valve

Color: Gunmetal Espresso, Classic Black, Navy Blue, Pearl White, Golden Knight, Silver Lust, Emerald Green, Frost Blue, Sakuka Pink

FEATURES:

1. Rock solid zinc alloy, max 25W

2. With upgraded Ursa cartridge

3. Compatible with salt/freebase

4. Supports all MTL to loose MTL & RL

5. Safety protections: Short-circuit/Weak Battery/Over Head Protection

INITIAL THOUGHTS:

I received the pearl white and the frost blue versions for this review. The white is nice but have to say the blue was my favorite of the two. It was generous of Lost Vape to send two samples which makes testing easier.

The packaging for the Ursa Baby Pro is nice and clean looking. You can see on the blue version below that the Lost Vape Quest and Ursa Baby Pro names are printed on the front along with a nice color picture of the actual device contained inside. I like when companies do this instead of using the same picture on all color versions. The back side of the box has a brief description of the device along with a contents list, warning, company information, and authenticity code.

Once the outer cover is slid off, the owner’s manual and instruction card are on top with the Ursa Baby Pro underneath with the .6 ohm pod pre-installed. There is a safety seal over the bottom of the pod so it can’t be accidentally fired prior to filling. There is a second pod sitting under the Pro but unlike the pre-installed one, this one uses the replaceable UB Mini series of coils. Below the Pro, sitting in the plastic insert, is a box of accessories that includes a .8 ohm UB Mini coil, a USB-C charging cable, and a lanyard if you like to use lanyards. Although it is made of zinc alloy, it is still lightweight enough to carry on a lanyard.

The front of all of the color versions look very similar with the color being the only difference. Going from left to right on the front, there is the sliding airflow control that allows the user a range of airflow from MTL to RDL. Below that is the Lost Vape name vertically inside a small inset panel. To the right, on top, is the single button found on this mod. It can be used to fire the output or the output can be used in auto draw mode.

The Pro has a .42” OLED display screen that shows the following information.

• Set wattage
• Battery level indicator
• Coil Resistance
• Puff counter

The single button on the front not only fires the output but also gives the user the ability to do a couple different things. I did struggle initially figuring out how to reset the puff counter since it was not mentioned in the user manual but discovered that when you power the Pro off and back on then it resets the puff counter. The other functions for the button are as follows.

Press the fire button 5X to turn the device on/off

• Press the fire button 4X to lock the adjustment. This locks the fire button but you can still use it in auto draw

• Press the fire button 3X to enter the adjustment mode. The wattage will flash on the display. Press or hold down the button to adjust the wattage.

I noticed that with the pre-installed pod that the Pro recognized the .6 ohm coil and defaults to 16 watts. I liked it better at 19 watts myself. With the .8 ohm replaceable coil pod the wattage defaulted to 9 watts which was also too low for my tastes. I preferred it at 12 watts.

The back side of the Pro can look quite different between color versions. You can see in the picture below that the back side has the same type of panel that is used on the front of this version while the blue one I received has a really nice graphic on the back side. Both of course have the Ursa Baby Pro name on this side.

On one side of the Pro is a single airflow inlet hole while the opposite side has the USB-C charging port which is rated for 5V/2A. I haven’t measured this but have a feeling it’s a little generous as many charging rates are. Above the port is an opening in the frame where you can attach the included lanyard if you so decide.

From the top you can see the usual two spring loaded contacts as well as the two magnets that align with the magnets in the pod to hold it securely into the pod opening. Near the top is the auto draw airflow sensor. Also to the left of the contacts there are three airflow inlet openings that lead down to the sliding airflow control on the front of the mod.

The pod in the second picture below is the .6 ohm pod with a built in coil that comes pre-installed in the Pro when you receive it. It is initially covered by a safety seal to prevent accidental firing. The kit also comes with a second pod which uses the Ursa Mini series of coils and can be seen in the third picture. The coil that is included in the kit is a .8 ohm coil but .6 ohm coils can be bought separately. Both pods are side filled with a port plug that is probably one of the easiest ones I have tried to remove for filling. The fill port opening is large enough that I had no issues with filling using the bottles that I normally use every day. The pods hold 2.5ml of liquid which is a nice increase from what has become a pretty standard size of 2ml for most pods. I know that the promotional pictures say that these pods are upgraded and 50% better but I think that is when comparing them to the original version of the Ursa pod. The V2 pods and coils have been out for a while now and I have tested them on other devices from Lost Vape.

FINAL THOUGHTS:

I feel like Lost Vape has done a great job with the Ursa Baby Pro. It took care of the things that I didn’t care for or thought were missing with the original Ursa Baby. I definitely appreciate the adjustable airflow on the Pro. I feel like if you’re going to put out a “Top Tier” pod system then there are certain things it needs to have and airflow control is definitely on that list of features.

Although the display is only .42” in size, it is readable even with my old eyes. The ability to adjust the output is also high on my list for a device like this. It does a fine job with the single button operation and its operation is much like other single button devices like this.

I found it interesting that they didn’t take the easy way out but instead decided to change the aesthetics of the devices from color to color. So depending on which color you choose then you may get a different design or material used. To me that is Lost Vape putting in the extra effort like we have become accustomed to from them. It would have been much easier for them to make them all the same style and just change up the colors but they didn’t.

During my time testing the Pro, I did not experience any kind of leaking and basically no condensation. I was not surprised by this since as I mentioned before, I have used these same pods on other devices. I have to give kudos to Lost Vape for breaking the mold and including two pods in the kit. Not only do they give you two pods but they give you one of each type of pod so you can decide which you like best. Whether you want a pre-built pod or a pod where you can replace the coils only, this kit allows you to try both.

I started out with the pre-built .6 ohm pod. When I turned on the Pro and inserted the pod then it defaulted to 16 watts. This is a good median starting point for this pod. However, I wanted to use this one for RDL so increased the wattage to 19 watts after an initial break in of the coil. It performed very well with no dry hits. For this one I used Dinner Lady Lemon Tart that I use a lot for testing and the flavor was very good for a pod and produced plenty of vapor for such a small device.

Next up I primed the included .8 UB Mini coil and pushed it into the pod until it was fully seated. I seem to remember from past experience that it is recommended to insert the coil with the slots cut in the bottom pointed to the sides. I may be wrong but was thinking this was the one that it was important to do that on. This time the Pro defaulted to 9 watts. I knew this was going to be too low for me so immediately bumped it up to 12 watts and tested it there while using an Orange Tart DIY recipe. Once again flavor was very good and vapor production was good but obviously a bit less than what was seen with the .6 ohm pod at the higher setting. The auto draw function on the Pro worked flawlessly the entire time I used it and rarely used the button to fire the mod.

To be honest, I usually don’t care for these small square type pods. I usually find them awkward to hold and use. This was not the case with the Pro. I discovered pretty quickly that the pod mouthpiece has to be on the left with the button on the right for it to feel right when taking a puff but since then I have really enjoyed using it. I’d like to thank Lost Vape and Bella for sending the Lost Vape Ursa Baby Pro samples for this review. No, I didn’t forget about you. Thanks to everyone that takes the time to read my reviews. It is much appreciated. Below is a link to the Lost Vape website so you can explore all of the fantastic devices they have to offer.

URSA BABY PRO - Lost Vape

Decadent - Creme Anglaise
Producer: England
A real dessert flavour, a sumptuous, custardy full vanilla flavour sweetened with brown sugar and a hint of caramel. A must try for all pudding fans. I've tried many custard flavours and somehow each one had a negative point in a different direction. Either it was too sweet, or there was too much vanilla, or it tended to have a side flavour. Anyway, vanilla pudding is a tricky flavour in my opinion.
But here you get everything you need in a real pudding. There's not much to say about the smell. The flavour is all the better because you really get what you expect from it. On the inhale, you'll be swept away by the sweet vanilla custard, and on the exhale, you'll get a little bit of caramel to make it leave your mouth even sweeter. It's just so hard to put down, it's so demanding. The proportions are perfect, the vanilla and the custard are just as sweet as if I had the dessert in a little bowl in front of me. I matured it for a month, cherishing it like a little sapling , but it was worth waiting for the final result. If you're in the mood and want a good vanilla pudding to steam alongside your favorite series, don't miss out on this flavor by any means.

Riot Squad - Cherry Fizzle
Producer: England
Packaging: 15ml aroma in 60ml Chubby Gorilla bottle
These filler bottles that the manufacturer has come up with for this brand, all in different colours, I think they look very nice and even make them comfortable to hold. Obviously everyone has a different opinion, but that's what I get from them. So, what we get is a cherry soup that hopefully won't be too overcomplicated. It smells like cherry soup, although I have to add that cherry and sour cherry soups always get a bit confused for me, as it's hard to tell the difference between the two. For me, it was totally "mummy's" cherry jam in terms of flavour. On the inhale, the jammy sensation comes out, sweet and cherryy. It has a little fizz to it, which gives it a freshness and makes the jar even more delicious. On the exhale, there's also a slight tartness that mixes with the sweet cherry. Overall, it's more sweet than sour. It's an interesting sensation when it bubbles in your mouth, like a fruity candy. Then I thought of something like Pez candy, although I don't know if it has cherry in it. The jarred flavour is accentuated in both the smell and the taste, which smooths out the steaming all the way through, and the fizz is a bonus feature to keep it from being boring after all day use. I read a lot of good and bad things about the aroma, but it's definitely worth a try if you like sweet flavours.

G'day Everyone For sale I have two very highly sought after atomizers!!! The Taifun GX and Kayfun 5(2) SE. Both are brand new and sealed in the original boxes.
I am located in Australia but will put all prices in US dollars.


Kayfun 5(2) SE, 25mm.
Price: $140us.
Kayfun 5² SE - Stainless Steel | 35550

Taifun GX, 23mm.
Price: $180us.
Taifun GX, reconstructable atomiser RDTAtop of the range, Taifun GX | Le Petit Vapoteur

Shipping cost from Australia to the US with Express Shipping is $34us.-$42us. PayPal FF Only.
Both of these tanks are slightly negotiable. Please do feel free to PM me at anytime.
Everyone Needs To Have Some Fun

Whether you are a novice or an experienced vaper, you must be looking forward to owning a stylish and powerful device. The eleaf ijust p40 box mod is a well-deserved product. With its compact size and impressive 40W power output, it offers you a great vaping experience in a portable and user-friendly package.

This box mod has a built-in 1800mAh battery, which can provide enough power for your all-day vaping use. Not only that, but you can charge it quickly and easily via its USB-C port. You can observe the battery level through its LED light and arrange the charging time reasonably.

With a maximum power output of 40W, the iJust P40 is able to produce thick, satisfying clouds and full-bodied flavours. You can experience multiple vaping modes from this device, including VW (variable wattage) and smart mode. The smart mode automatically detects the coil resistance and sets the appropriate power, allowing you to get started easily.

Apart from that, user-friendliness is also one of the strong points of this device. The iJust P40 Box Mod is compatible with various tanks and atomizers, making it a versatile choice for vapers who like to experiment with different settings, and is very user-friendly. The minimalist design makes the whole device stylish and simple. A single button controls all functions of the device, including power on/off, vaping mode selection and ignition. In order to protect your safety, iJust P40 Box Mod is also very safe to use. A variety of built-in protection functions can prevent overcharge, over-discharge and short circuits. It is a reliable choice for e-cigarette users who pay attention to safety and peace of mind.

With its powerful 40W output, multiple vaping modes and multiple compatibilities, Eleaf iJust P40 Box Mod is a device that can grow with you as you explore the world of vaping. So if you are looking for a reliable and satisfying vaping experience, the iJust P40 Box Mod is definitely worth considering.

More attractive new products are in our vape store, you are welcome to choose.

We also want to recommend more boutiques for you:
vape 10000 puffs
7000 elf bar

IJOY Q Disposable Vape is a compact and easy-to-use vaping device that comes pre-filled with e-liquid and is designed for single use. The device features a draw-activated firing mechanism, which means that you don't need to press any buttons to use it - simply inhale to start vaping.


IJOY Q is powered by a 400mAh battery that is designed to last for the life of the device. The battery is non-rechargeable, which means that once the e-liquid is depleted, the device should be disposed of and replaced with a new one.

Each IJOY Q disposable vape contains 2ml of e-liquid, which is available in a variety of flavours to suit different tastes. The e-liquid is formulated with a blend of high-quality ingredients, including nicotine, flavourings, propylene glycol and vegetable glycerin as a base.

The disposable Vape is small and lightweight, making it easy to carry with you wherever you go. The device is also designed for convenience, as it requires no maintenance or upkeep - simply open the package and start vaping.

IJOY Q Disposable Vape is a great option for vapers who are looking for an easy-to-use and convenient device that provides a satisfying vaping experience. Whether you're a beginner or an experienced vaper, the IJOY Q Disposable Vape is a great way to enjoy your favourite flavours without the hassle of refilling or recharging your device.

And you are able to visit any vapes you are interested in at cheap online vape shop.

Maybe you want to know:
9000 puff vape
instabar 5000

I'm an old fan of Heather's Heavenly Vapes, I bought a ton of Legend Purity just before they closed up shop. Now I'm getting close to running out, and I'm not finding the selection of PG-free tobacco flavors out there that I used to. I appreciate any recommendations! My basic requirements are: tobacco flavor, no PG, no fruit/candy flavoring.

I've tried some "max vg" options that contained a little PG, but I broke out in painful acne just as I do whenever I vape PG,

VOOPOO Argus GT II 2 Kit with UFORCE-L Tank

VOOPOO Argus GT II New Kit is the combination of Argus GT II Mod and UFORCE-L Tank. Argus GT II Mod is powered by dual 18650 cells and GENE.TT 2.0 Chip, comes with 200W max power stable output. With the advanced IP68 rating tri-proof function (water-proof, dust-proof and drop proof), it is durable and strong. In addition, it also supports Turbo/Smart/RBA/TC mode. And the features of 3A type-c fast charging and 0.96 inch TFT display screen will make the vaping more convenient. UFORCE-L Tank comes with 5.5ml e-juice capacity and easy top filling system. It is compatible with all PnP coils and two PnP coils are included. Adopting 3-hole top air inlets, it can deliver the balanced & sufficient airflow and avoid condensate & e-juice leakage effectively. What's more, The 360° adjustable airflow can also customize your favorite flavor.

Details:
1. 200W max output power
2. IP68 rating tri-proof: water-proof, dust-proof, drop-proof
3. GENE.TT 2.0 Chip
4. Turbo/Smart/RBA/TC mode
5. With 5.5ml UFORCE-L Tank
6. Top air inlet leakage-proof
7. Top to bottom airway
8. 3A type-c charging
9. 0.96 inch TFT display screen




Smoant Pasito Mini Kit

Pasito Mini Kit applies AI smart ANT-CHIP, which will ensure your safety and bring the function of auto-adjust output. It comes with 1100mAh built-in battery, type-c charging. A larger slider is added to help you adjust airflow. What's more, you can refill the juice from the side without taking the cartridge out. The cartridge has 3.5ml capacity, and is designed with a big visible window for you to see the juice level. Smoant Pasito Mini Pod Kit features constant voltage output. It will display different output with the different colors of strip light. 3 levels of output are available for Smoant Pasito Mini Kit: 3.65V(high level), 3.55V(medium level), 3.45V(low level). Smoant Pasito Mini Kit is packed with the P Series Coil that applies new advanced coil technology.

Details:
1. 1100mAh battery and type-c charging
2. Constant voltage output
3. 3-level output: 3.65V/3.55V/3.45V
4. One-step operation
5. Comes with new P Series Coils
6. Large slider to adjust airflow
7. Side filling and no need to take the cartridge out
8. Big visible juice level window
9. Solid magnetic connection
10. Strip light to display the different output
11. AI smart ANT-CHIP
12. Safety protections: Short-circuit/Over-temperature/Low Voltage/Overtime Protection

The Eleaf iJust P40 Starter Kit, offering a 1500mAh battery, 40W output maximum, and is natively paired with the 3mL iJust D20 Cartridge. Constructed from durable zinc-alloy, the chassis of the Eleaf iJust P40 Kit is lightweight and incredibly portable, easily fitting within the palm of the hand. Trading a screen for LED indicator lights, the iJust P40 Pod System further extends the battery life and adopts a chassis-based airflow control switch, carefully closing or opening the dual slotted design along the side of the device.



Size: 31*25*108mm
Battery Capacity: Built-in 1500mAh battery
Output Wattage: 10-40W
Charging Current: 5V/2A (USB-C)
Pod Capacity: 3ml
Filling : Top filling
...

Click here for more:

Eleaf iJust P40 Kit: Eleaf IJust P40 Pod Mod Kit

VALENTINE'S SALE IS LIVE NOW!
USE COUPON CODE (LOVE) TO GRAB 14% DISCOUNT STOREWIDE TILL 14th FEB,2023