Just bought the Cyborg quest about 2 months ago tops.
Been using it daily zero issues. Also use it with different attachments and it's worked great.
Just a few minutes ago I was puffing it and it was working fine then I put it down and came back to it 10 minutes after and it just stopped working.

I press the fire button and the wattage fluctuate and get almost no vapor.

I think it might have had a short circuit all of the sudden.

Below is a 2 min clip I made showing the issue.

Thank you!

EDIT Video uploading now (Decided not to post since issue is resolved below)

EDIT #2 SOLVED:
Holy CRAP I swear I did everything for 30 minutes and nothing worked. I reset 4 times I messed with the atomizer, I cleaned it with alcohol, I powered on and off, I tried different settings. I took the battery out. Nothing worked.
Guess what, now the dang thing is working again. I literally just smashed it on my palm a few times took a couple of hits and its working again haha.

Ty everyone.

I'm looking for eJuice that will help me both fall asleep and stay asleep. Anyone have any suggestions? From what I've seen there isn't a lot out there. Thanks in advance for any assistance.

Deb

Hi, today let's take a look at VooPoo Argus Pod G with launch date March 6, 2023. In this Test I will examine each of the features that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VooPoo Argus Pod G; Before starting, let's see together some special features indicated by the manufacturer:
• Powerful battery, long-lasting backup power
• Diversified vaping styles, super smooth taste
• Intelligent interaction, everything under control at all times



► VooPoo Argus Pod G; Packaging:
Unfortunately the package was delivered to me damaged by the courier, luckily I didn't find anything broken inside. The package is silver in color with mirror reflections and presents on the front; an image of the device in the same color as the device inside, the wording "Compatible With Argus Pod Cartridge", the name of the product and its color (Racing Green). On the back of the package are; Packing List, physical address and support addresses of the manufacturer, notices, trademarks & legal logos. On the side of the package you can see; some technical characteristics in the form of icons, QR Code, scratch & Check, serial number, batch number





► VooPoo Argus Pod G; Packing List:
• 1* Argus G Device
• 1* Argus Pod Cartridge 0.7Ω
• 1* Argus Pod Cartridge 1.2Ω
• 1* Argus Pod Platform Card
• 1* Type-C Cable
• 1* Lanyard
• 1* User Manual



► VooPoo Argus Pod G; Specifications:
• Dimensions: 110.9x25.7x13.5mm
• Power range: 5-25W
• Integrated Battery: 1,000mAh
• Output voltage: 3.2-4.2V
• Charging voltage: 5V/1A
• Supported resistance value: from 0.5Ω to 3.0Ω
• E-liquid capacity: 2ml
• Disposable Compatible Cartridges with Integrated Coils: ARGUS POD 0.7Ω and 1.2Ω
• Compatible Empty Cartridges with Replaceable Coils: ARGUS POD ITO-M0(0.5Ω), ITO-M1(0.7Ω), ITO-M2(1.0Ω) and ITO-M3(1.2Ω)



► VooPoo Argus Pod G; Available colours:
• Sand Drift Gold
• Glow Pink
• Satin Blue
• Space Grey
• Racing Green
Aurora Blue
• Gloss Black



► VooPoo Argus Pod G; First Impressions:
Compared to ARGUS SE here you can find the review: Review
Argus G grows in physical size and battery (800mah against 1,000mah), implements the use of a display and the Fire button in combination with automatic extraction. Argus G also has a slightly wider MTL/RDL airflow regulation system. Below you can see a comparison image between these two new VooPoo Pods.



The device that VooPoo has made available to me for my test is "Racing Green" in color with darker shades of green towards the bottom, the paint looks very nice and durable and this is most likely due to the careful CMF polishing process on the nanoscale. On the back there is the writing "Designed By VooPoo and on the bottom of the device there is a rubber support base to cushion the noise and increase the grip when you want to place the Mod standing up. Despite the narrow and elongated shape it is possible (with a little balancing act) keep the mod vertical even during the reloading phase.



On the main panel you can see two inscriptions "Gene AI" and "Argus". ARGUS G supports dual ignition, push button ignition and self-extraction. The fire button is metallic in texture and circular in shape. The button is located inside a screen which in turn incorporates a small monochrome OLED display. The information on the display is characterized by enlarged and clearly visible fonts.

* The "Gene AI" chipset allows you to view all the necessary info on the display such as;
• Power selected
• Ohm value of the coil
• Battery charge level
• Five-digit Puffs counter
• Duration of the last Puff
• Lock/unlock symbol

* In case of security notifications the screen will display text messages as follows:
• Low Power
• Short circuit
• Maximum power for the coil in use
• High temperature
• Timeout: (Even with automatic extraction), over 5 seconds of uninterrupted vape the protection will be activated.

For those who want to wear Argus G, there is good news, in fact inside the package there is a comfortable collar.



The long and thin form factor of Argus G can be seen from the side, in this case you can see the side that houses the TYPE-C charging port, with the supplied 5V / 1A cable it is possible to fully recharge the device in 60 minutes . According to VooPoo the built-in 1000mAh battery of Argus G supports stable vaping even with the maximum output of 25W and a full charge would last about 3 days at most. Of course, the duration of the battery charge depends on the frequency of use and the power selected.



► VooPoo Argus Pod G; AFC System:
VooPoo has introduced a fully adjustable 3-holes system to make the most of the incoming airflow; both for MTL extractions with the use of disposable cartridges and for RDL in combination with the use of Ito Sub-ohm Coils with special empty cartridges. The slider AFC system is controlled by a small but sturdy metal pin.



► VooPoo Argus Pod G; Operation Guide:
The intelligent interaction between the "Gene AI" chipset and the multifunction button allows the following operations:
• Power on: Press the button 5 times in succession.
• Shutdown: Press the button 5 times in succession to enter the function menu and keep pressing the button to select the shutdown option.
• Wattage adjustment: Press the button 3 times in succession to enter the function menu, select the wattage adjustment option, keep pressing the button to select a wattage between 5 and 25W. 【Warning: the maximum wattage on the screen varies with the resistance value of the installed coil】
• Lock/Unlock: Press the button 5 times in succession to enter the function menu, keep pressing the button to select lock or unlock option. (Auto lock after 15 minutes of inactivity)
• Puff reset: Press the button 5 times in succession to enter the function menu, and keep pressing the button to reset the counter.



The Compartment/Pod houses two rectangular magnets on the sides, two gold-plated spring-loaded pins and the sensor for activating the automatic puff placed in a raised position with respect to the bottom.



► Argus Disposable Pods:
ARGUS POD 0.7Ω cartridge and ARGUS POD 1.2Ω cartridge; With a patented multi-layer design, VooPoo built its cartridge with the intention of eliminating leaks by locking them securely within the structure itself. The cartridge made of transparent PCTG has an ergonomic lip spout and allows you to discreetly view the level of e-liquid inside it. The filling is done by lifting a silicone rubber, the good-sized hole allows you to easily insert up to 2ml of e-liquid. On the bottom of the cartridge there are 4 holes for the passage of air towards the coil, according to VooPoo this system expands the air flow that globally invests the coil, increasing the flavor, moreover the 4 holes are an integral part of the anti-leaking system present at the inside of the cartridge itself. On the bottom of the cartridge we can see that the magnets are NOT visible, actually there are and they work quite well.

► Argus Empty Pods:
This cartridge has the same characteristics as the disposable pod that I listed above, however the spare empty Pod (sold separately) allows you to use the replaceable ITO coils for both MTL and RDL. In this cartridge the coil is inserted from the bottom with a slight pressure.



In the tables below you can see all the "disposable pods" and all the "empty pods" compatible with the various Argus Pod devices. ARGUS Pod cartridges are compatible with the ARGUS POD family (ARGUS P1, ARGUS G, ARGUS Z, ARGUS POD, ARGUS POD SE). The empty cartridges are to be used in combination with ITO M1, M2, M3, M4 coils. Argus Pod G reaches a power of 25W Max for this reason and if you want to fully enjoy RDL-type extractions it is advisable to use the 0.5Ω (18-25W) ITO Coil. For this test VooPoo sent me two additional cartridges and two 0.5Ω ITO M4 replaceable coils for RDL, it's nice to have a replacement option like this compared to the original disposable cartridges.





► VooPoo Argus Pod G; Vape Test & Final Conclusions:

• ITO M4 Coils 0.5Ω range 18-25W:
For this test with the empty cartridge and the 0.5Ω ITO M4 coils (which VooPoo sent me separately) I used a self-produced e-liquid with Hypnos flavor diluted 10% in a base VG/PG 50:50 + 3mg/ ml of boost. For my way of vaping among all the available options this 0.5Ω ITO M4 Coils is definitely my favorite coil, very suitable for my needs for hot, abundant and full-bodied vapor, it gives my "Hypnos" all the aromatic notes I want, it also amplifies the boost present in the e-liquid to the maximum. The coil is detected by the chipset and automatically set to 23W which in my opinion is just the perfect wattage for it. This resistance passes the test with flying colors reaching a very high level of general performance, but above all I have not detected any worrying condensation. A definitely interesting Plus is the possibility of buying these empty cartridges as spare parts to be used with all the replaceable Ito coils; For example;
• 0.7Ω ITO M1 for an aggressive, airy and Hit-laden MTL vape.
• 1.0Ω ITO-M2 for MTL with a soft, velvety and narrow puff type in the right way for a discreetly airy MTL use.
• 1.2Ω ITO-M3 for MTL with a fluid puff type without spitting and with a perfect suction contrast for restricted MTL.

• Argus Disposable Pods:
In the package there are two disposable Pods with integrated coils; one of 1.2Ω and one of 0.7Ω dedicated to MTL vaping, my favorite is the 0.7Ω one because it provides greater Hit and heat, but I think both can really satisfy everyone as the aromatic yield is of a good level with exemplary operation and free from spitting. After a very intense use of both of these cartridges (on various VooPoo devices) I have not detected any trace of condensation in the compartment/pod. According to VooPoo the average coil life supports the vaping of around 30ml of e-liquid.

The new Argus Pod G in "Luxe" version is beautiful, well finished and relatively light with a robust zinc alloy construction. The Mod implements the oled screen becoming "professional" and more exploitable also in RDL. The GENE.AI 1.2 chip allows both manual and automatic double extraction. The automatic extraction mode works very well, in fact a slight aspiration is enough to activate the Puff instantly and with any degree of opening of the airflow, without any hesitation. The intelligent chipset detects the installed coil and automatically sets the best power, the button allows both lightning-fast activation and customized power setting and other adjustment options. The 1,000mAh battery seems really well managed by the chipset and recharges in a quick time of about 60 minutes, while recharging phase, the display shows the percentage and the time remaining at the end of the operation. That's really all for this interesting and modern Pod device which has many options to choose from disposable cartridges and empty cartridges with replaceable coils, I'm sure you will like Argus G.

• Thanks to VooPoo for sending me Argus Pod G for review:

• Thank you for reading.

Hi, today let's take a look at VooPoo Argus Pod SE with launch date March 6, 2023. In this Test I will examine each of the features that distinguish this item. I hope that at the end of this reading you can understand this product, and therefore decide whether to invest in it or not. As always, my opinions are free and based on my personal experience.
• Enjoy the reading.

► VooPoo Argus Pod SE; Before starting, let's see together some special features indicated by the manufacturer:
• Beautiful design gives a shiny look
• ARGUS POD cartridges with ITO atomization technology offer a delicious taste
• Simplicity simplifies operation, GENE.AI intelligence reassures the vape



► VooPoo Argus Pod SE; Packaging:
The box package is black and has the front; an image of the device in the same color as the device inside and the writing ARGUS POD SE in raised silver characters. On the back of the package are; Packing List, physical address and manufacturer's support addresses, warnings, legal trademarks & logos, scratch & check, batch number and color indication of this sample (Shiny Orange). Sideways on the package you can see; some technical characteristics in the form of icons, and 4 different QR Codes.





► VooPoo Argus Pod SE; Packing List:
• 1* Device Argus Pod SE
• 1* Argus Pod Cartridge 0.7Ω
• 1* Argus Pod Cartridge 1.2Ω
• 1* Type-C Cable
• 1* User Manual



► VooPoo Argus Pod SE; Specifications:
• Dimensions: 93x26.2x13.2mm
• Maximum power: 18W
• Built-in Battery: 800mAh
• Output voltage: 3.2-4.2V
• Charging voltage: 5V/1A
• Supported resistance value: from 0.5Ω to 3.0Ω
• E-liquid capacity: 2ml
• Disposable Compatible Cartridges with Integrated Coils: ARGUS POD 0.7Ω and 1.2Ω
• Compatible Empty Cartridges with Replaceable ITO Coils: ARGUS POD ITO-M1(0.7Ω), ITO-M2(1.0Ω) and ITO-M3(1.2Ω)



► VooPoo Argus Pod SE; Available colours:
• Black
• Brown
• Red
• Shiny Orange
• Shiny Blue



► VooPoo Argus Pod SE; First Impressions:
For this test I received the "Shiny Orange" color version of the Argus Pod SE which is the latest minimalist style version of the VooPoo Air Pod series. The finished product features a very compact size, eye-catching look, sturdy metal construction, brand-worthy finish, and updated GENE.AI chipset. In the image below you can also see Argus Pod G (next review) which is the updated "rich" version of this successful series of Pod Mods by VooPoo.



On the main panels; at the top and in relief there is the writing "Gene Chip Inside", on the opposite side there is the air flow regulation system (MTL) with scroll key made of zinc alloy like the rest of the body. Airflow adjustment allows you to go from loose MTL to tight MTL. On the lower panels, there are white silk-screened writings; on one side "VooPoo" and on the other side "Argus". The decorations are extended by the fine nanoscale lithography process, these decorations create a slight contrast of light and shadow against the bright orange color of this device.



The side panels blend smoothly into the rest of the Argus SE body; on one side there is the small (almost invisible) writing "Designed By VooPoo", on the other side there is the notification interaction system made up of 3 LED lines.

► LED notifications:
• Three lit white LED lines correspond to a battery charge level between 66% and 100%
• Two lit white LED lines correspond to a battery charge level between 33% and 66%
• A lit white LED line corresponds to a battery charge level between 0% and 33%
• During the charging phase, the corresponding white LED will be on.
• At the end of the charge, the 3 white LEDs will remain on
• During the vape the LED light gradually becomes brighter.
• When the battery is low, the LED light turns red and flashes 10 times
• In the event of a short circuit, the LED flashes red twice
• During use, if you exceed 8s of uninterrupted vaping, the LED flashes red 8 times
• In the event of high temperatures, the LED flashes red 15 times.



The Type-C charging port is located in the lower part of the Mod and allows the integrated 800mAh battery to be fully recharged in a rather short time, about 50 minutes.



The Compartment/Pod houses two rectangular magnets on the sides, two gold-plated spring-loaded pins and the sensor for activating the automatic puff placed in a raised position with respect to the bottom.



► Argus Disposable Pods:
ARGUS POD 0.7Ω cartridge and ARGUS POD 1.2Ω cartridge; With a patented multi-layer design, VooPoo built its cartridge with the intention of eliminating leaks by locking them securely within the structure itself. The cartridge made of transparent PCTG has an ergonomic lip spout and allows you to discreetly view the level of e-liquid inside it. The filling is done by lifting a silicone rubber, the good-sized hole allows you to easily insert up to 2ml of e-liquid. On the bottom of the cartridge there are 4 holes for the passage of air towards the coil, according to VooPoo this system expands the air flow that globally invests the coil, increasing the flavor, moreover the 4 holes are an integral part of the anti-leaking system present at the inside of the cartridge itself. On the bottom of the cartridge we can see that the magnets are NOT visible, actually there are and they work quite well. According to VooPoo the average coil life supports the vaping of around 30ml of e-liquid.

► Argus Empty Pod:
This cartridge has the same characteristics as the disposable pod that I listed above, however the spare empty pod allows you to use the replaceable ITO coils. In this case the coil is inserted from below with a slight pressure.



In the table below you can see all the "disposable pods" and the "empty pod forITO Coils" compatible with Argus Pod SE. All the ARGUS Pod cartridges are compatible with the ARGUS POD family (ARGUS P1, ARGUS G, ARGUS Z, ARGUS POD, ARGUS POD SE). On the occasion of this test VooPoo kindly sent me two empty cartridges to be used in combination with ITO M1, M2, M3 coils. Argus Pod SE reaches a power of 18W Max for this reason it is not recommended to use the 0.5Ω (18-25W) ITO Coil.



► VooPoo Argus Pod SE; Final conclusions:
The new Argus Pod in minimalist version renounces the oled screen becoming user friendly and more compact. The GENE.AI 1.2 Chip on this Mod allows the one and only extraction of the automatic type, simplifying its operation for vape neophytes. In fact, a slight aspiration is enough to activate the Puff instantly, with any degree of opening of the airflow and without any hesitation. The 800mAh battery seems really well managed and recharges in a relatively short time. In the package there are two disposable ITO Pods, one of 1.2Ω and one of 0.7Ω dedicated to MTL vaping, my favorite is the 0.7Ω one because it provides greater Hit and heat, but I think both can really satisfy everyone as the aromatic yield It is of a good standard with exemplary operation and free from spitting. After a very intense use of both of these cartridges (on various VooPoo devices) I have not detected any trace of condensation in the compartment/pod. Another certainly interesting Plus is the possibility of buying the empty cartridges as spare parts to be used with the replaceable Ito coils; such as 1.0Ω ITO-M2 for a soft and velvety type of puff, shrunk in the right way for a fairly airy MTL use. Or the 1.2Ω ITO-M3 which offers a smooth puff type without spitting with a perfect suction contrast for restricted MTL. I think this is really all that good that could be expected from a modern Pod system from VooPoo.

• Thanks to VooPoo for sending me Argus Pod SE for review:

• Thank you for reading.

Hello, I recently purchased 2 Aegis Solo 2's, one for myself and one for my wife.

I've noticed a few different things between the 2 units. On hers, when I replace the battery it remembers the color I have the screen set to, on mine when I replace the battery the color goes back to the default color.

Also today we found out on hers she can press and hold the + and - buttons and the wattage setting will lock, on mine pressing and holding the + and - does nothing.

I checked the firmware (?) version and hers says "R20210927 V11 , mine says 20210819 V2.4

Geekvape says there is no firmware update.

any way to get mine to do what hers can do?

Thanks

Clearing out all the old vape gear and hoping someone can get some use out of it. Willing to part with the whole shabang for $100.

The things I can still identify:
Original Zen ZNA
Aluminum Zen ZNA +copper battery tube + spare top cap
Evic VT
SMOK Stick v8
Two generic mech mods. One unused.
Copper Quasar RDA

Dear valued customers,

Here comes Healthcabin new round of giveaway!

Have you tried a pod kit supports both MTL and RL before? Heathcabin is now partnering with Lost Vape to giveaway the Ursa Baby Pro Kit with 5 winners in total. Ends on 13th Mar. How do you like it? Wanna test it for free? Here is the chance.

Come to join us and win it home!

Prizes:

Lost Vape Ursa Baby Pro Kit – 5 Winners

*If you are luckly to win, you will get one of the colors randomly.

About Lost Vape Ursa Baby Pro Kit​

Lost Vape Ursa Baby Pro Kit is a top-tier level pod system featuring 25W max power, 900mAh battery capacity, and has an MTL/RL airflow range. The combination of MTL and RL design makes it more choices for both newbies and veterans. Equipped with upgraded Ursa Cartridge that features 50% longer coil lifespan and 50% stronger flavor boost, you can enjoy the refreshing vaping at a whole new level across pod system device. Featuring a classic box-style alloy body, it is pocket-friendly portability, highly durable and precise, it also has sleek & modern appearance.

Join & Win​

Finish the tasks below and win the Lost Vape Ursa Baby Pro Kit home easily. Good luck to you all!!

If you cannot load the contest table below, please click here to join.

I’m rather inrrigued to find out which country everybody’s from, vaping is worldwide and that’s what brings us all together, I myself am from the United Kingdom, England.
I reside in a place called Nottingham (Robin Hood country) and at the time of posting I’m thoroughly enjoying A US range of E Liquid, “Shamrock Cookie” It’s a mix of Mint, Chocolate, Milkshake, reminds me of a chocolate we have here named “Aero”
Kindest regards
Nathan

Biff Bar LUX Disposable Vape - the latest addition to our lineup of premium vape devices. The Biff Bar LUX boasts a sleek and elegant design, coupled with exceptional performance, making it the perfect choice for any vape enthusiast.

One of the key features of the Biff bar lux disposable vape uk is its exceptional flavour. Available in four unique flavours, including Rainbow, Dragon Paradise, Fuji Grape, and Straw Colada Ice, each puff is bursting with delicious and authentic taste. Whether you're a fan of fruity or sweet flavours, the Biff Bar LUX has something to offer for everyone.

But the Biff Bar LUX isn't just about flavour - it's also designed to deliver an exceptional vaping experience. The device is pre-filled with 13ml of vape juice, which is more than enough to last you for several days. Additionally, the device comes with a rechargeable 650mAh battery and a Type-C cable, allowing you to quickly and easily charge your device.

With the Biff Bar LUX, you can enjoy over 5000 puffs vape - which is significantly more than other disposable vape devices on the market. The device is equipped with a mesh coil, which delivers a smooth and consistent vaping experience. The device is also draw-activated, which means that you can start vaping as soon as you take a puff.

The Biff Bar LUX also features adjustable airflow control, allowing you to customize your vaping experience to your preferences. Whether you prefer a tight or loose draw, the Biff Bar LUX has you covered.

Finally, the Biff Bar LUX comes in a range of nicotine concentrations, allowing you to choose the strength that best suits your needs. Whether you're looking for a nicotine-free vaping experience or prefer a higher concentration, the Biff Bar LUX has options to suit everyone.

In summary, the Biff Bar LUX Disposable Vape is a premium and high-performance device that delivers exceptional flavour and an outstanding vaping experience. With its sleek design, rechargeable battery, and long-lasting vape juice, the Biff Bar LUX is the perfect choice for anyone looking for a convenient and high-quality vaping experience. More vapes for sale, you are allowed to visit to learn more.

You may be like:
nicotine free disposable vape
good g pro 7500 puffs

The Esco Bars Mesh 6000 is a popular choice as a starting point for new vape users and those new to the brand.

The Elf Bar is the hottest product right now! Whether you're new to vaping or a long time vaper, you've probably seen this kit. You may be wondering what are the best Elf Bar Flavors, click the link to see it!

I recently picked up a Stumpy device, and absolutely LOVE the cable-fed boro inside. Not one leak, minimal condensation, and not a single dry-hit.
Are there any other bottom-fed/ cable fed boros that are worth my time?

I've seen some pretty negative reports on the Ponte, and I'm not really interested in getting custom panels for the Atemporal, so count those out for now.

I'd love to hear of your experiences and opinions, recommendations

TIA

I have a brand new in the box Bishop 3 Dotcubed RBA that I ordered on accident that I thought I was getting the boro version. Anyway, I just got it and it’s unused. I’d like to get $40 shipped only in the US.

So I been using regular cotton for years. I recently bought 3mm shoelace cotton for my 3mm clapton coils. Is this the appropriate size shoelace cotton? Because it seems really tight using 3mm shoelace cotton in 3mm coils.

Hey guys,

I bought a bottle of Vanilla Custard by Mr. Custard sometime last year. I really liked the flavor however I didn't really pickup any custard notes, what I got out of it was that it tasted more like a vanilla cake batter (no complaints here)! Anyways... I picked up a bunch of 100ML's from an online store that I won't name (for obvious reasons), they were having a killer sale on the line so I grabbed 5 Vanilla Custards and 6 Killer Custards and a bunch of coils.

Question for anyone that has this flavor at home right now (preferably new bottles that you just ordered recently). What color is the juice in your bottles? Mine is a dark, golden color and there is no EXP date anywhere on the packaging or the bottles. I can't remember what color the juice was when I bought a bottle of this stuff last year because I only bought it once, and just can't remember. If anyone has any they can post a pic of, I would appreciate it!

Thanks

Been trying to find an answer to this for a while and can't find anything.

My question is if you smoke 3mg at 60w, are you consuming twice as much nicotine as you would be smoking 3mg at 30w, as you're burning the juice twice as fast? (Twice the wattage = twice the nicotine consumption?)

And so by this logic, smoking 18mg on 10w would be the same as smoking 3mg on 50w?

If not, how does this work?

Thanks

Which is the one to get? Mostly play Forza, Fifa, Madden, Cod

Hey guys

Shot in the dark but I'm looking for a coilart azeroth rta or parts to it. Does anyone have the triple coil deck or the rta itself?

I got asked if I could attempt to fix a coworkers. He had gotten the grub screws stuck and stripped them out. I drilled the center of the screw and the post broke trying to remove the remainder of the screw.

I've tried looking for parts and the rta online and have had no luck.

Hey guys
Im a bit curious just for fun I did a comparison between 2 atties for flavor,
Decided to compare the wasp vls (basicly v2 wasp nano) using dual claptons 0.5ohm and the new Uforce L tank with the pnp TW/VM 0.15ohm mesh heads they use
Ive noticed they both taste very good... I cant lie but the uforce taste slightly better is that because of the mesh coils?
Seems like the new tanks with new coils now a days are getting really good!
Or maybe its because the rda I compared it with is very cheap I believe its the cheapest rda you can get its like 20bux maybe 15...
That might play a role?
Anyway curious on why that is or maybe my mouth likes mesh more idk haha but im not giving up rda tho its my main atties

Last night, I was in a rush, switched batteries in my mod, and had a little trouble getting the battery in, but got it in. I've done this more times than I can count. Anyway, got in front of my computer, hit the fire button and it sounded like it always did. Put the drip tip up to my mouth, hit the fire button again, and WOW! Got the shock of my life which woke me up from a terrible dream. The inside of my mouth rooftop got hit with high heat. Thank God, I pull away quickly. Now I usually vape at 30-40 watts, but somehow this thing got turned up to 180 watts! I believe I'm okay, raised my mouth out with salt and water, and when to bed.
Question: Has this happened to anyone else that is reading this, and what was the outcome of it? What did you do and how long did it hurt for.
Thanks

Excellent condition 10/10, not a scratch
Everything stock included, box, airflow pins RBA etc, only selling due to upgrading to a Billetbox, preferably UK only due to shipping costs, everything works as it should
Rrp £119.00

Asking price £70.00, will be posted Royal Mail special delivery at no extra cost, I’ll cover that
Any questions please ask
Best regards
Nay