The Z50 by Geek Vape is a return to the internal LiPo based small thin portable stock coil tank kits that used to be very prevalent in the market just before 2020 hit.

═╣ Z50 by Geek Vape ╠═

00:00 ◄ Intro and specs
02:28 ◄ Close up
09:14 ◄ Temp Control & Wattage Vape
11:28 ◄ Thoughts


Login to view embedded media

All of a sudden, my working SPEEDER 200 stopped working. I did all the check offs: batteries charged, atomizer good, etc. The digital screen continues to display EN TH.

I searched Aspire website and nothing is mentioned about how to correct an EN TH screen notice. It's Saturday and ASPIRE chat is offline. I replaced the batteries, still the same screen message. Tried resetting by clicking per instructions, received the same message. I attempted to update the software but my PC refused to recognize my ASPIRE device. Bummer Morning!

If you recognize this EN TH on the digital screen, please HELP with "step by step" instructions. Also, if you know how to get my PC using Windows 10 to recognize Aspire to update, I will appreciate that also. I searched for PC problems with updates, and nothing has worked.

Thank you and enjoy your Holiday.

Often there is a photo posted of someone's collection showing 10, 15, or 20 kits lined up on a desk or a shelf. Right now I have 11 of them lined up behind my keyboard, with the juice bottle behind each one. Every once in a while I go to grab something on the desk and they all go down like dominoes. It's infuriating and hilarious. So far no breakage. I need to build a rack or something. Has this happened to you?

Drag X Plus Professional Edition continues the classic design of leather and metal, and provides max to 100W output by GENE.FAN 2.0 chip. The new TPP pod tank with 510 interface and 21700/18650 dual compatible batteries allow you to explore more possibilities.



With 8.5V Max boost circuit, Drag X Plus Professional Edition brings you consistent flavor and super power.


Which of these features attracts you most? Comment below.

Hey guys. Today let's look at the Drag X Plus Professional Edition by VOOPOO. Maybe you've used the original Drag X Plus before but this new edition is very different. Here we go!

With dimensions of only 88x35x29mm, the new mod is small and also lightweight thanks to a zinc alloy chassis. In addition, the latest TPP pod tank is also quite small, so you may take the kit wherever you go. With 124 tests performed to find the best UI for the full-color display screen, VOOPOO decided on two alternatives for users. The first is the Core which is horizontally directed, while the second UI's name is Iron with vertical vape data. With both, you may set the color theme to your liking, and vape data is shown in a crystal clear manner. Another design difference with the new edition is that it is compatible with three different atomizer platforms. You can use it with VOOPOO's line of pods or install your own 510 atomizer with an adapter. Built with the latest Gene chipboard, this edition is ideal for all-level vapers. If you are just starting your vape journey, simply set the mod to Smart mode which means the atomizer resistance will be automatically detected for the ideal setting. But, if you are quite skilled, there's an RBA mode, ideal for RTA, RDA, and RDTA. You may adjust the power anywhere in the range of 5-100W.

VOOPOO also ensures you'll get long vape times by supporting both a 21700 battery or a 18650 battery with this setup. Either cell is inserted via a bottom-hinged panel, but you'll need to utilize the included adapter with the 18650 due to its smaller dimensions. A fast-charging USB-C port on the control face ensures recharging is done in no time at all. Due to the chipset, you'll also be quite safe while using the Drag X. As you can see in the infographic below, there's overtime, short-circuit, balanced charging, reverse battery, over-temperature, short circuit, and overcharge protection on both the software and hardware levels. With purchase you will get the latest TPP Pod with 5.5mL capacity and a bottom-fill method. This cartridge also features patented TPP coils of which two are included in the package. Choose from either the TPP-DM1 0.15ohm mesh coil (60-80W) or the TPP-DM2 0.2ohm mesh coil (40-60W). Perhaps the best aspect of the coils is that they produce the best possible flavor. They achieve this by fast heating and high e-liquid atomization efficiency to produce the flavor and vapor clouds you are sure to enjoy.

Get it here: VOOPOO Drag X Plus Professional Edition Kit 100W

You may also like:
innokin coolfire z80 price
hyperion dna 100c mod review

Has anyone had any bad luck with their flavorings?

Got some flavors from them about a month ago, mixed up a couple recipes that had roughly a week steep time but they all came out to be trash after 2 weeks. Some of the recipes were from reputable diy’ers so I’m kinda confused lol. Was thinking maybe it’s the flavorings idk. Even tried some single flavor recipes like harvest berry and 27 fishes but still trash. The blue raspberry cotton candy from cap used to be my fav adv but it’s a straight floral smell, can’t even use it.

Just curious if anyone has received bad stuff from them. I only hear good things about them which is why I ordered from them.

The Joyetech Evio pod system Kit uk is a compact and sleek Pod system that features an AST steel quick heating material with 0.001 ignition super boost flavor and throat shock. Zhuoyue EVIO POD system suite has a built-in 1000mAh battery with high/medium/low power consumption. Click the button 3 times.


Vape Joyetech uk EVIO Pod Kit adopts 3 indicator lights to show battery life and Draw-activated & Button Triggered to operate it easily. Joyetech EVIO utilizes Dual Air-inlet System: rotating the cartridge 180° to choose the large airflow or small airflow. Joyetech EVIO Pod has 2ml capacity with side filling design.
You can make an order from best online vape shop uk.

SPECIFICATION
Size:75*49*14mm
Battery Capacity:1000mAh
Charging Port:Type-C
Cartridge Capacity:2.0ml
Filling Method: Side Filling
Resistance:0.8-1.2ohm
Power:High/ Medium /Low
Charging:5V/2A

Quick Link:Joyetech EVIO Box Pod System Kit 1000mAh

Wotofo MDura Mod

MDura Mod is a high-wattage mod to provide a surprisingly high-performance setup. The proprietary nexChip Technology would deliver a rapid-firing mod that fires within 0.0001s. The fast 2A charging capacity through its Type-C port gives a rapid charging time for the MDura Mod. The device features 0.96" color screen with an intuitive interface that makes navigating the different options easier. You can adjust the settings for a customized vaping experience to enjoy blowing clouds of your favorite flavors. The Mod is compatible with 3.5ml nexMINI Sub Ohm Tank.


Details:

1. High wattage dual 18650 battery mod
2. High-performing, excellent build quality
3. Durable with an exquisite leather wrap
4. NexChip technology, rapid-firing in 0.001s
5. 0.96" color screen, easy-to-navigate interface






VOOPOO Drag X Plus Professional Edition Kit

Drag X Plus Professional Edition Kit includes Drag X Plus Professional Edition Mod and TPP 2.0 Pod Tank. It is made by zinc, leather and PCTG for more friendly and comfortable hand feeling. Drag X Plus Professional Edition Mod supports single 18650/21700 battery and has 5-100W output power range, It also supports VW/SMART/RBA mode, you can get the vaping information easily with a 0.96 inch TFT screen design. TPP 2.0 Pod Tank is compatible with TPP Coils. You can use other atomizers on Drag X Plus Professional Edition Mod with 510 connection.

Details:

1. Supports single 18650/21700 battery
2. 5-100W output power range
3. Powered by new GENE FAN 2.0 chip
4. Comes with new TPP 2.0 Pod Tank
5. Supports VW/SMART/RBA mode
6. 0.96 inch TFT screen
7. 510 connection for matching other tanks
8. Type-C charging design






Drag X Plus Professional Edition Mod

Drag X Plus Professional Edition Mod is powered by single 18650/21700 battery and has 5-100W output power range. It also supports VW/SMART/RBA mode. The vaping information can be get easily with a 0.96 inch TFT screen design. You can use other atomizers on Drag X Plus Professional Edition Mod with 510 connection design.


Details:

1. Smallest dual 18650 Battery Mod
2. 5-200W max output, TC/VW mode
3. 0.96" TFT color screen
4. CNC aluminum body, more durable
5. USB Type-C 5V/2A

One of my 18650 batteries had a snag so I did my first re-wrap. I thought I had it positioned well before turning on the hair dryer but seems I got way more wrap on the pos end than on the neg end of that Samsung 30-Q. Here it is next to an original wrap. There's not much wrap at all on the negative end. Do you think it's ok or should do over?

I need help!!!! So I upgraded from a smok rpm80 and now I have a aegis legend x Zeus edition it has a side screen and it keeps saying I have no could but i do what do I do to fix this?!?!?!?

Hi ECF members, In this review i take a look at the Artemis MTL RTA from Cthulhu Mod. The Artemis MTL RTA was supplied for the purpose of this review by Joshua from Cthulhu Mod.

CTHULHU MOD -Innovations for You



Introduction

Cthulhu Mod was the first manufacturer i came across that bridged that gap with some of their early RDA's and RTA's between mainstream and High End while keeping prices reasonable, of course now Thunderhead Creations and BP Mods are very similar with both Dovpo and Aspire with their Manufacture collaborations also upping their game in this regard!

Cthulhu Mod despite recently releasing a couple of Mods are rebuildable specialists and here we have their latest MTL RTA The Artemis. With a unique look and clever way of inserting airflow pins which allows swapping out while not disturbing your build this has a very interesting design. With adjustable AFC also having 5 settings and 4 different bore size airflow pins plus the option of no airflow pin gives 25 different airflow settings ranging from tight MTL to loose MTL, and even sketchy RDL. Also coming with alternative matching smoked tube and 510 drip tip and packaged in a useful deep tin with screw lid let's check out The Artemis MTL RTA from Cthulhu Mod!

___________________________________________________________________



In The Box



Contents:

Artemis MTL RTA
1.0mm, 1.4mm, 1.8mm, 2.0mm air pins
Alternative 510 smoked drip tip
Alternative Smoked Poly Carbonate tube section
Spare O-rings & Post screws
Legendary Blue handled Screwdriver
Manual

___________________________________________________________________



Aesthetics

I have always liked how Cthulhu Mod package their products, at one time they use to come in flip lid boxes with cushioned lining and a hemp like material on the outside with a nice badge and cord with tassel to finish it off! Nowadays we have more toned down packaging as they instead come in useful deep tins. Here we have a deep round tin with screw lid and on opening my eyes met a high end looking RTA, spare smoked tube and spare smoked drip tip in their own compartments within the foam inner lining! I received the Stainless Silver version which comes with a Stainless Steel very long narrow bore MTL 510 drip tip and frosted Poly carbonate tube, the option is Stainless Steel or Black.

Up top we have the top-cap which goes inwards before protruding out again, when removing you will see the actual practical top-cap ends with an O-ring seal and then we get that protruding extension almost giving it a double top-cap look, a very unique aesthetic look which gets added to further with that pre-installed long narrow drip tip!

We then have an upper Stainless Steel sleeve followed by narrow frosted tube. Below the tube we have a further Stainless Steel section followed by an airflow control ring with aggressive fine knurling.

Moving to the underside of the base we have the usual etched safety marks and branding then although the 510 pin can be removed when the base is separated from the deck when the tank is screwed together it's fixed so can't be adjusted, it's gold plated and protrudes slightly!

The Artemis has a SS304 construction, all threading and tolerances are spot on! The build quality and looks are much more in common with my high end rebuildable atomizers than most of my mainstream rebuildables but it comes at a very affordable price!



___________________________________________________________________



Artemis MTL RTA Specs and Features:

Diameter: 22 mm / 0.86 in
Height: 35 mm / 1.37 in (without drip tip)
Weight: 53g
High Quality 304 Stainless Steel Machining
Poly Carbonate tank tube
Air Flow Ring: 0.8mm, 1.2mm, 1.6mm, 2.0mm, 2.7mm
Air Pin under Coil: 1.0mm, 1.4mm, 1.8mm, 2.0mm (without air pin: 2.7)
Capacity: 2.4 ml
5*5=25 accurate air flow setting.
Changing Air Flow Pin under Coil without Damaging the Coil
Design for Tight MTL and Loose MTL Vapers
Asymmetric Posts for Easy Coil Building
New Dome Shape Chimney for Better Flavour and Throat Hit
Colours: Stainless Silver, Black



___________________________________________________________________



What You Receive?

You receive the 22mm in diameter Artemis RTA with pre-installed Stainless Steel long narrow 510 drip tip, narrow frosted Poly Carbonate tube section and one of the airflow pins also fixed in position.

You also get a smoked lower profile 510 alternative drip tip, matching smoked Poly Carbonate tube, 3 more airflow pins with different internal bores, Spare post screws, O-rings and of course both paperwork and the famous Blue Philips screwdriver!



___________________________________________________________________



It's Various Parts

The Artemiis consists of a 510 fitting drip tip followed by a unique looking top-cap. We then have a one piece 304 Stainless Steel section that consists of the upper sleeve, fill ports, air pipe and chamber which has really nice machined inner doming!



We then have the frosted tube section followed by base section which consists of the GTA style deck section and removable base with airflow control ring! The base section unscrews from the deck to allow the airflow pins to be swapped out but this will be covered in another section. With the top-cap removed we have 3 thin spokes and then large fill ports between, very similar to the Mercedes Benz badge so nearly entirely filling area which i like because it means any nozzle or glass dropper will be suitable.



The top-cap both simultaneously screws to the inner of the outer sleeve section and central air pipe before the seal completes with a thick O-ring. Going back to the Poly Carbonate tube which can be removed by simply putting a finger or thumb in the chamber and then using another finger or thumb on the outside of the tube just pinch and out it pops, putting back in place whether it be the frosted or alternative smoked tube is just the case of press fitting into place.



I like the way the tube just gets precision fitted into place both to the upper sleeve and base sections as it doesn't rely on either threading and/or O-rings for it's seal so no need to worry about an O-ring wearing, snapping or moving out of perfect position and no worries about threading between metal and Poly Carbonate which can be dodgy!

As well as the long narrow Stainless Steel drip tip and frosted tube you can fit the alternative drip tip and/or smoked tube or with it being a 510 standard drip tip fitting use another drip tip if you prefer!



___________________________________________________________________



The Airflow Pins

You receive 4 airflow pins which have different sized bores, one of which is pre-installed but i didn't take notice of which one was pre-installed and also you have to use your own eye to differentiate the different sized bores as there is no marked sizes on the pins themselves which is a rare con for the RTA!



___________________________________________________________________



Fitting The Airflow Pin

The Airflow pin is the upper section of the 510 pin which is hollowed out to a specific bore and air can enter through a cut-out section to the side, this allows for direct bottom airflow that travels from the standard AFC through the side of the pin and up through the hollow directed at the underside of your installed coil.

But rather than unscrewing the 510 pin from underneath the base and struggling not to disturb your build as the positive section of the deck at this stage would be unsecure here we have the lower base section which includes the AFC and positive pin that unscrews from a solid GTA deck section which has a fixed positive post! To unscrew you need to turn counter clockwise but once tightened back in position the AFC moves with such a nice tolerance there is no issues with the two parts unscrewing while altering airflow settings!



When unscrewing the deck from the chamber you need to make sure you hold the base section by the metal section above the AFC so you don't unscrew the lower base section from the deck rather than the deck from the chamber, also when putting onto a mod don't overtighten or again with that reverse threaded lower base section you could go too far and start undoing the lower section of the base from the deck. It just has a short learning curve until you get use to what's what and where to hold when securing the deck etc, i got the knack just while messing around taking photos for the review so by the time it even came to doing a build it wasn't an issue so although it needs mentioning it's not a deal breaker!



When the lower base section is unscrewed from the deck you will see the airflow pin is the top extension to the 510 pin although there is positive contact without the airflow pin being installed so no pin installed gives 5 of the 25 airflow options but for me which will be explained later an airflow pin really needs installing! The airflow pin just unscrews from the 510 positive pin which allows you to screw on any of the 4 different airflow pins, the different bore sizes are 1.0mm, 1.4mm, 1.8mm and 2.0mm, as mentioned you have to use your eye to choose which pin is which because no size is marked on the pins themselves, with no airflow pin installed the hollow underneath where the coil will be positioned is 2.7mm!



The Airflow control ring has 5 settings which are again different sized openings for airflow to travel to the pin, they are 0.8mm, 1.2mm, 1.6mm, 2.0mm and 2.7mm!

___________________________________________________________________



The Deck And Build

The Artemis has a GTA style deck with asymmetric posts which have post screws with Philip heads, I would prefer hex heads but in my opinion Philips are the next best type! I only came across one issue which i only became aware of because it happened to me so once you know it's not really a problem! When unscrewing the first post screw to fit a MTL fused Clapton it popped out, they are quite short post screws, once i was aware in future i just unscrewed enough to fit my leads and not a problem but worth a mention!

We have opened top posts with walls either side and central post screws so you simply unscrew your post screw to allow your lead to slide underneath and then when fastening down your screw head acts as a clamp and those walls stops the lead popping out while securing! Once fixed in position just use a coiling rod or fit for purpose tool to move your coil into the best position and then snip your access leads!



I did two builds, a simple round wire and the pictured fused clapton which needed either half a wrap adding or losing to have my leads facing opposite directions. I went for losing half a wrap and must admit it's not the prettiest, i don't think i would score high for either artistic impression or technical merit but it gave great results when vaping which is all that counts! Once your coil is secured in position just give it a few pulses strumming any possible hotspots out and burning off any residue left from manufacture!



Wicking is a doddle, very forgiving! I just fed my cotton through and cut quite short then simply after a fluff up teased into the wicking channels without pushing down, gravity will take care of that once the cotton is saturated! Then just prime, fire and admire your work even if it looks like one of my builds, actually the build was very easy once you are aware that the post screws are quite short!



___________________________________________________________________



How It Vapes And Thoughts!

First we have the reversed threaded lower base section which unscrews from the deck but once you get use to where the tank needs holding when unscrewing, screwing tight and not to overtighten on a mod it's not an issue and quite a short learning curve is needed to figure it out!

Also not having the sizes marked on the airflow pins is another minor con but i found my own sight was a good enough judge of which was which and also the design allows the pins to be swapped out not really on the fly as you need to remove from the mod and unscrew the lower base section but without disturbing your build which is a pro!

The short post screws also need a mention but no big deal and also no coil/coils or cotton is provided which for me is a con as i believe all rebuildable tanks should come with everything that is needed to do at least one build. The only other issue is using this as a RDL tank with no airflow pin fitted which is perfectly possible but the issue is this has really impressively smooth airflow with one of the airflow pins installed but with no airflow pin it becomes a choppy ride so i have to disagree with the 25 different airflow options and recommend only using with an airflow pin installed so 20 options in total.

After that it's pros all the way and some big pros. I actually found this that good with both my builds i picked the brains of a forum mate who has had this a while to make sure my builds were not a fluke and i wasn't missing something but apparently not this is one cracking MTL RTA which should be involved in the same discussion as the Pioneer, Glaz Mini, Intake etc, it's right up there!

Those 20 airflow options using a pin gives draws from as tight as anyone i know would need right up to a very loose MTL and silky smooth across the board, but as mentioned if you want that very restricted RDL which some people actually do buy MTL tanks for it means not using a pin and for me it's a very turbulent vape!

Apart from the odd sizzle or crackle from the coil the tank is silent, the AFC tolerance is spot on and the threading on the top-cap smooth, it's also a big pro that you can fill using any type of nozzle or dropper with those wide open fill ports! The build is easy and it wicks like a dream giving a really awesome saturated vape while not showing any signs of flooding even after a fill and i have had zero (i mean zero) leaking! I used a 2.5ID coil for both my two builds but a 3.0ID will also fit no problem.

I love the long narrow Stainless Steal drip tip it's one i would also use on other MTL RTA's but a bonus you get an alternative smoked drip tip and it's a standard 510 fitting so you can use one of your own if you prefer! I also like that a smoked tube is also included so if you do prefer the smoked drip tip you can matchy matchy or you might just prefer the smoked tube look! When it comes to flavour this is top drawer, i wouldn't say it gives better than my other favourites but it's a match for anything!

Big shout out to George Batareykin who designed the Artemis MTL RTA, he did a great job!



___________________________________________________________________



Likes

Excellent build quality
SS304 Construction
Tolerances, threading and machining spot on
Nicely machined domed chamber
Unique looking
Long narrow Stainless Steel Drip tip (really like a lot)
Alternative Smoked Drip Tip Included
Standard 510 drop tip fitting (use your own if you prefer)
Smoked Tube Included
4 Different Airflow pins included giving 20 airflow options (5 more options with no pin but see cons)
Tight MTL right through to loose MTL
When Using Airflow Pin airflow silky smooth across the board
Silent apart from the crackle of your coil
Easy build and forgiving wicking
No flooding or leaking (even after a fill)
Gives saturated vape with top drawer flavour!
Can swap out Airflow Pins without disturbing your build


Cons

Learning curve to get use to reversed threaded lower base section
Short post screws (once aware not a problem)
No size markings on Airflow Pins
Very turbulent when using without airflow pin so 20 not 25 setting choices recommended
No coil/coils or cotton included


I would once again like to thank Joshua from Cthulhu Mod for supplying the Artemis MTL RTA for the purpose of this review, thanks for reading and stay safe!

CTHULHU MOD -Innovations for You

___________________________________________________________________

Hello again and welcome to today's review of the Havok V1 Pod Mod from Uwell. The Havok V1 Pod Mod was supplied to me from Sourcemore for the purpose of this review and at the end of the review I will leave a link as well as a discount code saving you 29% off with a price of $27.99. The Havok is a very simple and easy to use device having a built in 1800 mAh battery and using wattage only as your power mode, no TC modes. The Havok is a very lightweight device being made of a aluminum alloy. Lets find out some information on the Havok V1 Pod Mod prior to my review.


COLOR CHOICES





INCLUDED IN THE BOX



1 * HAVOK V1 Pod Mod

1 * UN2 Meshed-H 0.25Ω HAVOK V1 Coil (Pre-installed) (DTL)

1 * UN2 Meshed-H 0.6Ω HAVOK V1 Coil (MTL/RDL)

1 * Pack of O-rings

1 * User's manual





SPECIFICATIONS








FEATURES


* Pro-FOCS flavor testing technology

* Intelligent Coil Recognition

* 1800mAh Internal Battery

* Max 65W Wattage Output

* 0.96-inch OLED screen

* Type-C USB Port - 5V/2A Fast Charging

* Puff Counter

* 4ml Refillable Pod

* Sliding Top Cap - Top Fill System

* E-liquid Level Window

* Airflow Valve - Adjustable airflow

* Removable Coil (Included 0.25ohm/0.6ohm UN2 Meshed-H Coil)

* New UWELL Havok Coil Series

* Magnetic Pod Connection

* Multiple Circuit Protection Functions


COLORFUL DESIGN





TYPE-C CHARGE PORT - 5V/2A FAST CHARGING





CONVENIENT TOP FILL METHOD








NO LEAKING





REPLACEABLE COIL





PRO-FOCS TECHNOLOGY





EXPLODED VIEW





FIRST IMPRESSIONS


Opening up the box you are greeted with the Havok with all it's bright and colorful design, lifting up the tray that the device lays in you will find the 2nd mesh 0.8Ω coil and extra O- rings in their own cut out spot underneath a long black packet containing your user manual, warning card and a weekly fans event card. Uwell does not provide a charge cord in the package and I have to mark that as a big con, for a seasoned vaper it's not because we all have a dozen or so charge cords from different devices that we already own but for a new vaper they are stopped dead in the water when the battery fully drains of power.






I plugged the device into my charge cord and began to top off the battery that was down 1 battery bar on the display meter, charging the Havok to full power only took about 10-15 minutes. I wanted to check the strength of the magnetic connection of the pod to the mod and really had to pull hard to separate the 2 from each other, not only does the Havok have a magnetic connection but it also clicks into place with a final push down on the pod.

Inside the device are 2 gold spring loaded contact pins that connect to the coil, the pod only fits in one way with the top fill port sliding door facing on the other side of the display screen. The pre installed mesh 0.25Ω coil is shipped with a piece of tape that has to be removed covering the contact to prevent a accidental firing of the device before the coil has been primed and tank filled. When reinstalling the coil remember to line the flat side up towards the airflow inlet door.





The Havok uses a top fill method that really makes filling the pod a breeze by incorporating a sliding door covering the fill port membrane that acts like a one way valve allowing liquid to enter then sealing back up when your bottle tip is removed, I'm glad to see this fill method starting to be used in many devices, Uwell is marked on the sliding door. Using a 30 or 60 ml bottle the juice bottle tip will fit all the way in the fill port, however if using a 100 ml bottle because the drip tip is fixed and not replaceable the bottle tip will still penetrate and fill the pod only it will not penetrate very far so tip the pod on a angle and fill slowly.







The 4ml pod has a clear window allowing you to view the juice capacity very easily, the shape of the juice window is in a angled triangle that keeps the device looking uniformed. It doesn't look like it holds 4ml but in fact it does.





The Havok has a airflow selector that is located on the pod itself and is also a sliding door type as the top fill door mentioned earlier. To adjust the airflow the pod must be removed and through trial and error of putting it back in place and testing it to find your desired selection. Airflow can be tightened down to a completely closed position where 0 airflow is produced. Adjustments are made by sliding the door up or down, the door has the right amount of resistance with no chance of it coming off it's setting because it sits recessed in the pod. Making MTL adjustments need to be made in very small slivers. The picture below shows the airflow door half open.





On the front side of the device is a very busy colorful design having HAVOK Faithful to Powerful written across it. Depending on your color choice of green, black, silver, red, or blue the entire device is that color with the colorful sticker placed in the center.





Turning the device around to it's backside lightly imprinted is HAVOK, Designed by UWELL and some GPS coordinates with a mesh symbol and a Havok logo. The juice window is visible from the front and back of the device.





The type-c charge port is located on the bottom of the device across from 3 battery venting holes, it would have been nice to have the charge port on one of the sides instead
of the bottom of the device.





The front face of the devices display screen has a clean high end look with the fire button at the top and the up/down buttons at the bottom above the Havok logo. This is one of the brightest most vivid screens I've seen in a while, the color is of white lettering and numbers with fonts that are sharp in detail and big enough to see without having to squint.

The display screen is laid out nicely with all the information you need presented in a vertical grid that I will list below from left to right and top to bottom.

* Power Mode

* Battery Bar

* Wattage

* Volts

* Coil /Ohms

* Time / Seconds Vaped

* Puff Counter





The Havok is so simple to operate that there is no need of a menu system only a few button combinations to remember and they are listed below.


* On/Off - 5 quick presses of the fire button

* Wattage Lock/Unlock - Press and hold the fire and up button simultaneously

* Lock/Unlock Entire Device - Press and hold the fire and down button simultaneously

* Clear Puff Counter - Press and hold the up and down button simultaneously

* Reset The Device - Press and hold all three buttons simultaneously


FINAL IMPRESSIONS


When Sourcemore asked me if I would review the Havok Pod Mod for them I of course said yes knowing the Aeglos coils are real flavor producers having reviewed the Aeglos Pod Mod earlier in the year. The new Aeglos coils for the Havok stay true to form as they are great flavor producers as well, very much above average and have a long lifespan as well.

Everything works as intended and I've had 0 problems. Because the coils airflow supply is inside the pod itself, it's pretty much a leak free system because there's no place for the juice to escape into the device.

The top fill method the Havok uses is starting to show up on more and more devices because it works flawlessly while being a very nice convenience for us . While some devices that use this system require you to touch the mouth piece with your fingers to access the fill port the Havok's sliding access door alleviates this, in today's day and age of germs this is a welcome feature.

The airflow is smooth but on the noisy side and can be very airy or closed down to a very tight MTL, you will have to make very tiny sliver adjustments in the MTL adjustments that can be frustrating but once found and the pod is put in place rest assured it's not coming off the setting you made. The drip tip works very well and is comfortable which is a very good thing because the drip tip is not replaceable.

I mentioned earlier how bright the display screen is, even in bright sunlight it can be seen and read easily because the font size is just right.

The Havok fires immediately with a tap of the fire button. As far as battery life on a single charge vaping using a 2.7 second average vape I was able to get 228 vapes before the battery was depleted fully. The charge time for charging a fully depleted battery is about 1hr and 30 minutes for a full charge.

The Havok is billed as being able to reach 65 watts but it uses a smart technology that limits the wattage to the maximum for the coil that is being used, I really love this feature as well. Maybe the 65 watts is for future coils for the Havok because the 0.25Ω maxes out at 46 watts with the pod installed, but when the pod is removed wattage can indeed reach 65 watts. The Havok also has the round robin feature.

So in closing I will tell you this one is a winner for sure and I will be getting more coils for it because it has been included in my rotation of personal devices I use regularly. I also feel with the smart tech that the Havok uses, it makes a perfect starter kit for a new vaper having everything they need in one kit ( MINUS THE CHARGE CABLE ) that should have been included with the Havok.

I said in the beginning of this review I would leave a coupon code and link to be purchased at Sourcemore for a price of $27.99 the code is HAVOK and the link is below.

Uwell Havok V1 Kit 65W 1800mAh Pod Mod Kit

I would like to thank Lilia and Sourcemore for providing the Havok V1 Pod Mod for the purpose of this review and I hope that this review has helped anyone looking to purchase the Havok V1 Pod Mod from UWELL.

THANK YOU
BIGBOB2322

Movkin Disguiser 150W Mod - this is a regulated dual 18650 mod which, well, disguises your tank/RTA (if less than 25mm diameter. Movkin made a squonk adapter kit for this mod but I'm having a hard time finding one anywhere in stock. The color of the mod is red.

Specs:
Size: 61x45x87mm
0.91 inch OLED Display
Wattage Range: 5w-150w
Voltage Range: 6.6v-8.4v
Resistance Range: VW(0.10-3.0ohm) VT(0.05-2.0ohm)
Temperature Range 200-600F/100-300C
Uses two (2) high drain 18650s (Sold Seperately)
10 second cutt-off
Short Circuit Protection
No Atomizer Protection
Low Voltage Protection
Over Current Protection
Over Heating Protection

Package Contents:
1x Disguiser 150w Mod (Tanks and Batteries Sold Seperately)
1x 15mm Elastic Delrin Drip Tip
1x 510 Extension Tube
User Manual

Price: $25 shipped via USPS Priority Mail. Payment Paypal F&F.

The Marvos T by Freemax marks the reentry of Freemax into the pen style of kits wrapped around the pod/aio concept of tanks with a stock subohm coil.

═╣ Marvos T by Freemax ╠═

00:00 ◄ Intro, specs and close look
08:31 ◄ Vape
10:32 ◄ Thoughts


Login to view embedded media

Kanger Arymi Armor Kit + Extra tank- Seems like Kanger may have been ahead of the curve on the side-by-side mod trend. Includes full kit and additional Armor tank. Mod is silver color as is the additional tank.

ATTENTION: this mod uses a built-in 2600mAh battery. The kit is in sealed packaging and I have not opened it to test or attempt to charge the mod. I will be happy to unseal it and test for interested buyers. If you would rather have it arrived sealed, we can do that as well.

Specs:

• 
  
  • Dimensions: 3-1/4" x 1-3/4" x 1"
  • Unique Stealth Design
  • Submerged Atomizer Design
  • Detachable Stealth Ring
  • Only Compatible with 22mm in Diameter and Smaller Tanks
  • Spring Loaded 510 Contact Pin
  • Built-In 2600mAh Battery
  • Simple One Button Design
  • Minimum Resistance: 0.15
  • Zinc Alloy Construction
  • Micro USB Charging Port: 5V/1A
  • Five LED Battery Life Display Screen
  • Low Battery Alert
  • Atomizer Short Circuit Protection

Features and Specs for Arymi Tank

• • Dimensions: 2-1/8" x 7/8"
  • 22mm Diameter
  • 3ml e-Liquid Capacity
  • 510 Threaded
  • Top Fill Design
  • Unique Drip Tip Integrated with CHC Atomizer Head
  • Drip Tip Features Dual Airflow Slots
  • Stainless Steel Construction
  • Glass Tank
  • Leak Resistant Cup Design
  • Easy Coil Replacement Design
  • Includes (1) Armor CHC SS316L 0.3ohm Atomizer Head for Variable Wattage or SS316L TC Mode
  • Recommended Wattage: 15-50 Watts

Package Contents
1 x Kanger Arymi Armor Box
1 x Kanger Arymi Armor Tank
1 x SS316L CHC 0.3ohm Atomizer Head
1 x Set of O-Rings
1 x Micro USB Cable

Price: $32 shipped via USPS Priority Mail. Payment PP F&F.

Joyetech BatPack Starter Kits - these little guys run on AA batteries! These would be great starter kits, travel mods or toss one in the glove box as an emergency option (which is what I did - one in my truck and one in my wife's car). Coils are still available from various vendors (MVS, for example).

Features and Specs:

• Joyetech ECO Technology
  
• Dimensions: 4-1/4" x 1-7/16" x 11/16" x (Including Tank)
• 510 Threaded
  
• Simple One Button Design
• Maximum Output Wattage: 8W
  
• 1.85V Constant Output
  
• E-Liquid Capacity: 2.0ml
• Top Fill Design with Twist Off Cap
  
• Dual Restrictive Airflow Hole Design
• Lightweight and Compact Design
• Requires (2) AA or AA Ni-MH Rechargeable Batteries
• Optimized for Higher Nicotine Levels or Nicotine Salt Based E-Liquid
• Joye ECO D16 Tank with BFHN Atomizer Head
• Includes (2) Joyetech BFHN Mouth to Lung (MTL) 0.5ohm Atomizer Heads (Pre-installed)

Colors available: rainbow, blue/pink, green, gold, red.

Price: $16 each shipped via USPS First Class Mail. Payment PP F&F.

The MELAMPOUS Chorus RTA Clone Rebuildable Tank Vape Atomizer is made from stainless steel in 22mm diameter and PMMA tank tube holds 4.0ml capacity. The RTA is faithful to MTL roots (2 x 0.8 flat) and Low profile feeding. The AFC is with three holes of 1.7mm & two of 1.0mm on each side.



More detils for this MELAMPOUS Chorus Clone RTA, check https://www.3fvape.com/50593-melampous-chorus-style-rta.html

@AndyColins

Pls check your PMs or email and reply to me asap so that your Forum Supplier status remains intact.

Dear Customers,

Good day!

Here comes our new round of Brand Discount for the brand new July, with 3% off for selected 10 brands and buy 10 get 1 free for selected hot vape. Take the chance to join us and save more on your favorite vape-brand products!

A. 3% OFF Selected Hot Brands

• Discount: 3% OFF for selected 10 hot brands
• Date: 5th – 12th July, 2021 (-0600 GMT)
• Wholesale ONLY
• No coupon code required, total discount amount can be found at your shopping cart

10 of our best selling brands listed below:

• VOOPOO
• UWELL
• INNOKIN
• VANDYVAPE
• DOVPO
• WOTOFO
• Horizon
• Eleaf
• HELLVAPE
• Yumi

B. Buy 10 Get 1 Free
Here is a special offer – buy 10 get 1 for selected items Uwell Yearn Neat 2 Pod Kit, plz feel free to check it below and order if you like it~



Buy Uwell Yearn Neat 2 Pod Kit Here

• Limited offer, first come first served!
• The free one will be added to your shopping cart directly!

With any questions, please feel free to contact your account manager.

Please view the July Brand Discount here.

Say Hi to Drag X Plus Professional Edition! Feel super power and consistent flavor with it.



Check more details in the video!
Login to view embedded media
Do you want to be the first tester? Share your thoughts below.
See more: VOOPOO VAPE Spark Your Moments

Buy Best E Liquid Vape Juice Online Store | Vape Hammer