I have a stress EchoCardioGram on next Friday. The leaflet and website say avoid smoking and tobacco for 2 hours prior

Just wondering if I can vape still? Or maybe even vape some zero nicotine, since my regular 50mg @ 50 watts might nudge whatever it is that they want to test upward

Also have a 24 hour holter monitor Monday. But that says no preparation required

Thamks

Dan

Link: GeekVape Obelisk 200 Kit

GeekVape Obelisk 200 Kit
Thanks to Geekvape for sending me the product for free in exchange for my honest evaluation.
Obelisk 200 Kit

Main features:
• Extremely compact dual battery mod
• CNC machined aluminum body
• Dual 18650 power supply
• Up to 200W of power
• Magnetic battery cover with CMF design
• Obelisk Tank with child resistant top refill
• AFC adjustable at the bottom
• Compatibility with the Coils of the Geekvape Z series
Enjoy the reading

GeekVape Obelisk 200 Pack:
The cardboard box is a version dedicated to reviewers, so it is not the definitive one.
On the front there is only the GeekVape logo, on the back they are present; The packing list, the useful numbers of GeekVape, the logos and trademarks of the law.

Inside the box, the kit is divided into two floors, the first is reserved for the Mod, while on the lower level you will find the tank and accessories.



Packing List:
• 1 * Obelisk 200 device
• 1 * Obelisk Atomizer (5.5ml)
• 1 * Geekvape Z Series 0.2Ω 70-80W Coil (pre-installed):
• 1 * Geekvape Z Series 0.4Ω 50-60W Coil
• 1 * Coil Extraction Tool
• 1 * USB-C cable
• 1 * Bag of spare parts
• 1 * Replacement Glass Tube (5.5ml)



Technical data:
• Dimensions of the Mod: 82 * 48.5 * 26mm
• Weight of the Mod:
• Battery: Two 18650 batteries (not included)
• Output range: 5-200W
• Supported resistance ranges: 0.05-3.0Ω
• Screen: 0.96 "TFT color display
• Temperature range: 200-600 / 100-315
• Charging voltage: USB Type C, 5V / 2A
• Atomizer capacity: 5.5ml
• Diameter: 25mm
• Drip tip: 810 replaceable



Obelisk 200 Kit colors:
• Black, Blue, Gunmetal, Silver.



Atomizer Colors:
• Black, Blue, Gold, Gunmetal, rainbow, SS.



Obelisk 200 Vs Obelisk 120:

I had already spoken very positively about the Obelisk 120 FC and its incredible charging speed of its integrated 3.700mAh cell. A new proposal from Geekvape now appears around the curious name "Obelisk". The new Obelisk 200 keeps the form factor and size almost unchanged, but it is a replaceable dual 18650 battery Mod.
Also for this version GeekVape used the "Unibody" CNC manufacturing technique in aluminum alloy. The two kits also differ in the use of a different sub-ohm Tank, the 120FC is equipped with the Zeus Tank with AFC from above while the 200 is supplied as a kit with the Obelisk sub-ohm Tank with air regulation from below. . The two tanks use the same identical Coil's series Z.



Obelisk 200 Mod feeling:
I received the Black version of the Obelisk 200 for this test.
The classic form factor in retro style is of sober extraction, the rounded edges, the weight contained in only 110g (mod), the construction in sturdy aluminum alloy and the compact dimensions, make the Obelisk 200 one of the double battery Box Mods. most interesting currently on the market.



Obelisk 200 Mod Side View:
The glossy finish on the black colored panels is very nice but is a magnet for fingerprints. The inscription "Geek vape" with silver light reflections appears on both sides.
The USB-C charging socket acts as a large safety "vent", and also allows you to charge the Mod in an upright position. However, I always recommend using an external charger when it comes to devices with replaceable cells, this certainly brings advantages in the sense of less circuit stress, better cell charging and greater safety.



Obelisk 200 Mod front/rear view:
The fire and adjustment keys "+" and "-" are well clickable, are well proportioned, seem well made, are protruding and do not produce abnormal noises.
The display is very bright and is adjustable as intensity in the percentage from 1 to 100%. With the maximum brightness selected it is good visualization even in light conditions outside those of the house. On the display it is possible to view all the information useful for vaping, mainly: Current mode, graphic indicator of the charge level of the two cells, set power, lock / unlock, Coil value, Amper, Volt, Puff counter.
The rear part on the sides is very rounded and connected and has two vertical grooves in the center, along the entire surface.

I bought this mod years ago. At the time, it was probably the nicest mech clone ever made. It's remarkably well made and works perfectly. It is practically brand new. I stashed it away and just recently unearthed it. I threw a battery in it, adjusted the 510, threw an atty on it and gave it brief shakedown.

The switch is super nice (this mod will stand on the switch with a battery and atty and not fire). Telescopes to accommodate 18350, 18500 or 18650 batteries.

It's not Super-T quality (I used to own two genuine Super-T mods ) but it's probably the nicest mech tube clone I've handled.

Price $23 shipped USPS First Class Mail. Payment PP F&F.

Auguse Era Pro RTA

Era Pro RTA is a rebuildable tank atomizer of 4ml e-juice capacity. It features knurling design, dual coil deck, bottom and side airflow. You can open or close the juice channel by turning the tank. And the drip tip has 3 layers of heat sink. Some pins are also included in the package to help you get greater vaping.

Details:

1. Easy top filling system
2. Knurling design, dual coil deck
3. Bottom airflow and side airflow
4. Drip tip has three layers of heat sink






Auguse Draw RTA

Draw RTA comes with the 510 adapter and it can match with VOOPOO Drag S/X when you remove the 510 adapter. It has 4ml e-juice capacity, features single coil deck and bottom airflow system. Draw RTA is easy to build and will provide you great MTL vaping. The package contains 1.0mm, 1.2mm and 1.5mm airflow pins.


Details:

1. With the 510 adapter
2. Can match with VOOPOO Drag S/X when the 510 adapter is removed
3. Single coil deck, bottom airflow
4. With 1.0mm/1.2mm/1.5mm airflow pins
5. Easy to build, for MTL vaping





GeekVape G18 Pen Kit

G18 Pen Kit is a flavor-in and color-out Starter Kit. The pen-shaped body comes with built-in 1300mAh battery, it supports a whole-day vaping and USB-C Port enables a convenient charging. The 3-level adjustable power output enables a low-med-high level flavor adjustment. The 2ml crystal-clear visible pod comes with leakproof deck design. With adjustable bottom airflow system, G18 Pen delivers a long-lasting, easy-to-use MTL experience. GeekVape G18 Pen Kit is compatible with G Series coil. Eight vibrant colors are available.


Details:

1. Built-in 1300mah battery with USB-C port
2. 3-level adjustable power, low-med-high level flavor
3. Pen-style portability, fashionable & durable
4. 2ml crystal-clear visible pod
5. Leakproof deck, easy to clean
6. Adjustable bottom airflow for direct and smooth inflow






Auguse Khaos RDTA

Khaos RDTA is a rebuildable dripping tank atomizer. It comes with a BF pin for RDA and is compatible with squonk mod. Khaos RDTA can hold 2ml e-juice capacity, features single coil deck for easy building. You can adjust the AFC ring from the top, or change the airdisk inside to obtain the best airflow.


Details:

1. Single coil deck
2. Top-to-side airflow
3. 2ml e-juice capacity
4. Comes with a BF pin
5. Top filling system
6. BF pin for RDA
7. Compatible with squonk mod

For who is looking for some poweful vape kit, here comes a brand new Fortis kit from SMOK, a reliable vape brand. Anything special about this SMOK Fortis? Let's check it out!



Main Features:
1. TFV18 Mini Tank, press-to-open & top filling system, with bottom adjustable airflow
2. Compatible with V18 Mini Coil 0.15/0.2/0.33Ω
3. Single 21700/18650 battery, output power 5-100/80W
4. Cylinder-shape & full-grained leather material, handy & light

Size: 38.8 x 32.4 x 149mm
Capacity: 6.5ml/5ml(TPD)/2ml(TPD/UK)
Resistance: 0.2Ω/0.15Ω
Battery: 1 x 21700/18650(Not Included)
Color: Silver, Black, Blue, Brown, Red, 7-Color


Learn More: (login first to check better wholesale price on Elego)
SMOK Fortis

Elego provides the most competitive wholesale price for Vozol disposable kits, login to check more latest vape kit with better price!

For any questions about SMOK wholesale or any vape wholesale in China, feel free to contact us.

The BP MODS Hilt Mosfet mod is a specialized portable mod for MTL/RDL vapors. It supports 3 output levels: 3.5V, 3.8V and 4.2V max power.

When you firstly see this mod, you'll see how it meets the ergonomics and futuristic design. The Hilt Mosfet Mod is powered by an 18650 battery, or an 18350 battery if you take off the extended 18650 battery tube and put on a short outer shell, depending on your personal preference. Despite its delicateness and exquisiteness, this mod can run from 3.2V to 4.2V on voltage and supports resistance from 0.45ohm to 3.0ohm. Like the slogan, it's absolutely portable.



Features:
1. Ergonomics and futuristic design
2. Comes with 22mm / 24mm beauty ring
3. Powered by single 18650 battery (not included)
4. Supports replacement outer shell to use 18350 battery (outer shell and 18350 battery sold seperately)
5. Three output levels: 3.5V, 3.8V and 4.2V max power
6. Waterproof chipset
7. Suitable for MTL / RDL vaping
...

Click here for more:

BP MODS Hilt Mosfet Mod: BP MODS Hilt Mosfet Mod

Hey guys. This time let's look at a new disposable vape named Tugboat Mega Flow. It is available in many flavors and can provide about 4000 Puffs. Don't miss out on it if you want a portable and easy-to-use MTL device, here we go!

Tugboat Mega Flow is a new disposable vape developed and launched by Tugboat. The large battery capacity and pod capacity of the Tugboat Mega Flow can support it to vape more than 4000 Puffs. It also has ten different popular flavors for you to pick from it and find the one that matches you best.

The Tugboat Mega Flow has an amazingly huge battery capacity that can reach up to 1000mAh, and its e-liquid capacity is also huge, with each device filled with 10ml of delicious fruits flavor vape liquid fully. You can also choose the vaping way through its adjustable airflow design, bringing you the most convenient and wonderful vape enjoyment.

Check for more details here: TUGBOAT MEGA FLOW Disposable Vape Device 4000 Puffs 1000mAh

You may also like:
hyppe max flow flavors
bang xxl vape price

Today,I will introduce you the Innokin Zenith 2 Tank uk.A good tank can enhance your smoking experience. Let's see what the advantages of this tank are, shall we?

This tank uk for sale improves on the original Zenith tank while also maintaining the fan favourite features. Featuring a rotating top cap, it is easy to fill up with e-liquid. Simply turn the top of the tank to reveal the vape juice port. Then insert the nozzle and fill with e-liquid. To prevent leakage the filling port has a silicone seal which prevents any vape juice from coming out.

The Zenith II tank is compatible with the Innokin Z coils which are available in a wide range of resistances to suit both MTL and RDL vapers. The 510 connection means this tank can be used with most vape mods or other devices that use a 510 connected tank.

This tank is ideal for mouth-to-lung vapers offering a perfect restricted airflow, plus the Z coils are available in a wide range of resistances to suit personal preference. Even restricted direct lung vapers will enjoy the Zenith 2 tank when used with lower resistance Z coils. Vapers who like to switch between e-liquid flavours will appreciate the removable glass tank making it easy to clean out when when switching flavours.If you are intrested in it,you could visit best online vape store uk to learn more.

SPECIFICATION
Material:304 Stainless Steel+Pyrex Glass
Diameter:26mm
Height:51.7mm
Capacity:5.5ml
Filling:Twist Top Fill System
Resistance range:0.1ohm-3.5ohm
Coils:Z Coil 0.8ohm MTL Coil (14-17W), Z Coil 0.3ohm RDL Coil (30-40W)
Compatible with All Zenith (Z) Series Coil
Thread type: 510 thread
Airflow:Adjustable Bottom Airflow
Colors:Black, Stainless Steel, Gun Metal

Quick Link:Innokin Zenith II 2 Tank 5.5ml 26mm

Willing to trade or buy outright.

Long post but please hear me out.

I'm willing to trade just about anything. I have a Troll, a Zeus X (with both coil and mesh decks) a Kylin Mini 2, a Creed two Profile Ms, a Profile Unity, the Doom X Mesh.... I'll trade anyone or maybe even two.
I'm even willing to trade a mod, with batteries. The Smok Scar-18 230w. With two hohmtech hohm Life 18650's. All of this is barely used and in like new condition.

The Bravo rta is sold out everywhere! I bought two of them about a year ago for 5$ a piece on wetvapes and it has been my main favorite ever since.I really love this rta... Ive purchased a lot of other rta's and not many of them can match the intense clean flavor I get from my bravo. TheSmok v12 Prince and v8 Cloud beast with their rba head give almost better flavor. The Taifun GT4 is almost as good. Zeux x is pretty good too. The Troll x was a huge let down at first but I got it tasting decent now. The Kylin mini 2, for me, is complete trash. Well not really but it's my least favorite. The Creed is decent.

Anyway my main rta's are the Bravo (all day every day) v12 Prince and Cloud beast (for work) taifun gt4 (daily) the rest I really don't use......

When will it available in the US if ever?

Voopoo Drag X Plus Professional Edition Kit, improving the 8.5V output with boost circuit makes it powerful and stable. DRAG X Plus continues the classic design of leather and metal and provides max to 100W output by GENE.FAN 2.0 chip. The new TPP pod tank with 510 thread and 21700/18650 dual compatible batteries allow you to explore more possibilities. the DRAG X Plus maintains a passion for sophistication and style, allowing you to be on-trend whether at work or at a party. This is probably the most lightweight MOD device available, overturning your imagination of MOD. The new TPP pod tank with 510 interface makes it lightweight and performance compatible. DRAG X Plus supports a single 21700 or 18650 external battery and is strong with Type-C 5V/2A fast charging port to accompany you from morning to night. With max 100W power output, DRAG X Plus enables you to make bigger flavorful clouds. Adjustable power range 5-100W is to satisfy your needs. Comes with a smarts mode for switch, the SMART mode is suitable for newbies, it will intelligently identify your coils; and the RBA mode allows you to break the power limit and feel powerful.

The updated TPP 2.0 tank is designed with reference to Aerodynamic Simulation and a new Two-way Convection airway structure to maximize the overall atomization efficiency. At the same time, the large capacity of 5.5ML also provides more possibilities for players. Magnetic design with 510 connector, giving players more space to match any favorite device more professional equipment, more explosive power. The TPP series coils feature a new patented technology that not only increases the internal atomization area, but also increases the heating speed to enjoy flavor than ever before.

Parameters:
Size: 28* 34.5* 139.8mm
Material: Zinc Alloy, Leather, PCTG
Battery: single 18650/ 21700 battery(Not Included)
Output: 5-100W
Output: Max 8.5V
Output modes: VW, Smart, RBA
Input voltage: 3.2-4.2V
Screen: 0.96 inch TFT display
Resistance range: 0.1-3.0Ω
Capacity: 5.5ml
Resistance: TPP-DM1 0.15Ω Mesh Coil (60-80W)
TPP-DM2 0.2Ω Mesh Coil (40-60W)
Thread: 510

Features:
Single 18650/ 21700 battery, output power 5-100W
New GENE FAN 2.0 chip, 0.001s ignition
New TPP 2.0 pod
0.96 inch TFT screen, dual UI themes
VW, Smart, RBA modes
Compatible with TPP & PnP & 510 Platform
Overtime protection
Short circuit protection
Overcharge protection
Output over-current protection
Over-discharge protection
Over-temperature protection
Max power protection
Battery reverse protection

Packages:
1* Voopoo Drag X Plus Professional Edition Mod
1* Voopoo TPP 2.0 Pod Tank
1* Voopoo TPP-DM1 Coil Head 0.15Ω
1* Voopoo TPP-DM2 Coil Head 0.2Ω
1* USB Type-C Cable
1* User Manual

So I have recently purchased the target pm 80 this after I have had the glass ejuixe holder with the long battery stick and I had to replace the glass every other week I'm a but clumsy plus have small hands and they were just too bulky for me. I've done some research I am a mtl I love nic salts flavor but now I find out the target isn't good for nic salts. My question is what if or can I use a 1 or 1.2 ohm coil in the target pm80 or must it be the. 2 or. 3 bc I have read I need to use a 1 ohm or greater for nic salts. I'm so angry even though this my first target pm80 it broke within 3 months and vaporesso stood behind their product and sent me another free bc a million others have encountered the same defect they offered to give me another product I asked for the target pm80 se which is a hybrid and would allow to enjot the salts and also eleimate the battery defect issue in the regular target pm80 bc it comes with rechargeable battery but it was more money n they wouldn't do it. That makes no sense. I'm. Curious how log this product will last until I run into same battery problem again. Why wouldn't they offer the se as the alternative bc it seems To fix battery issue. As u can tell I haven't had the best luck with e ciggs but I continue to try and to Educate myself bc it's a lot better than smelly cigarettes. Any suggestions about any of the issues I have? Lol

Howdy folks! I’m back again today to talk about the new Drag X Plus Professional edition mod that was sent to me by Voopoo in order to provide a fair and honest review. Several months ago I reviewed the Drag X Plus which I very much enjoyed testing and used for quite a while. It included the TPP pod tank but this time I only received the mod without the tank. From what I understand there is a new TPP 2.0 tank but I haven’t tried it so can’t really comment on how it is different. However, I just grabbed the TPP tank out of the first kit to test the Professional edition with it. The Pro edition is very similar to the Plus but has one big change in the output that it will provide.







WHAT’S IN THE BOX?

1* Drag X Plus Professional Edition Mod
1* Type-C Cable
1* User Manual




SPECIFICATIONS:

Size 28*34.5*139mm

Battery Single 18650/21700 battery (not included)

Output Wattage Range 5-100W

Input Voltage 3.2V-4.2V

Material Zinc, Leather, PCTG

Output Mode VW, SMART, RBA

Screen Display 0.96 inch TFT screen

Resistance Range 0.1-3.0ohm

Coil Compatibility TPP series coil

Tank Capacity 5.5ml

Tank Resistance TPP DM1 0.15ohm, TPP DM2 0.2ohm

Thread 510

Charging Type-C charging

Color Black+Black, Black+Coffee, Silver+Grey, Silver+Retro Brown, Silver+Blue





FEATURES:

• 1. Supports single 18650/21700 battery
• 2. 5-100W output power range
• 3. Powered by new GENE FAN 2.0 chip
• 4. Comes with new TPP 2.0 Pod Tank
• 5. Supports VW/SMART/RBA mode
• 6. 0.96 inch TFT screen
• 7. Compatible with TPP & PnP & 510 platform
• 8. Type-C charging design
• 9. Two-way convection airway structure
• 10. Magnetic suction pod
• 11. Safety protections: Overtime/Short-circuit/Overcharge/Output Over-current/Over Discharge/Over-temperature/Max Power/Battery Reverse Protection

INITIAL THOUGHTS:

The packaging for the Pro is simple but nice. Upon opening it, I immediately noticed the nice leather on this one. The Drag X Plus that I reviewed before had the light blue brushed material on it. I like the leather look much better on this new one. I like the grey well enough but honestly was hoping for the dark blue one.

The frame of the mod is made from a zinc alloy material and looks nearly identical to the Plus besides the lettering in the leather. The mod supports 21700 batteries as well as the 18650 with the included adapter. It has a range of 5-100 watts and has the Smart and RBA modes just like the earlier model. There are two display types also just like the original which are Iron and Core. I personally prefer the Iron display on this mod as the Core display comes up horizontally so you have to turn the mod sideways to read it.

Facing the display side, you have the fire button that has no rattle on top with the display directly beneath that. Below the display is the + and – buttons with the USB-C charging port below that. To the right of the display there is just “Gene chip inside” etched into the metal. On the opposite side from that is the Voopoo name etched into the metal. On the rear of the unit there is the leather wrap and “DRAG X” stamped in large letters with the word “PLUS” in much smaller letters below that. On top is the 510 connector held in with two screws and it has a spring loaded gold plated center pin. On the bottom is the battery door which has a single arrow indication which way to slide the cover in order to install the battery. It operates very easily. On the inside surface of the battery door it has a – symbol indicating how to install the battery. Everything I described is identical to the Plus except the Plus I received had a suede type finish on the wrap on the back.
















The menu or button operation is fairly simple without a lot of bells and whistles. The button sequences are as follows.

- Press the fire button five times to turn the mod on and off

- Press the fire button three times to switch between Smart and RBA modes

- Press both buttons to switch between the two available display themes which are Core and Iron

- Press the fire button and the + button to lock the device. This unfortunately not only locks the adjustment buttons but also keeps the unit from firing.

- Press the fire button and the – button to clear the puff counter

Once again, this is the same operation as the Plus model. What is the main difference on the Professional edition is that it has the Gene.Fan 2.0 chip with .001 firing speed and Dynamic Stable output and an output range up to 8.5v which means this one has boost where previous versions did not. I was able to run a 21700 battery down until the display showed a tiny red spot in the battery indicator without noticing a difference in the output. This was running a .2 TPP coil at 49 watts. I also tried a 1.2 ohm coil in a different tank and ran the wattage up and was able to get 5.8 volts output on the display. I didn’t want to go any higher or I would have burned the wicking in the coil. However, to me that verified that it does in fact have a boost circuit that works.




FINAL THOUGHTS:

I very much enjoyed testing the Voopoo Drag X Plus Professional edition mod. I do wish that I had gotten the TPP 2.0 tank to try but did not. The Plus and Pro editions are basically identical besides the branding on the leather and the Pro has the boost circuit that will most likely appeal to experienced users. It was a funny coincidence that I received the Pro for review with the boost circuit after just recently being involved in a discussion about whether another device did or didn’t have boost and it ended up that it didn’t.

The Plus and Pro both are very lightweight and on the small side in my opinion for a 21700 mod. Both are comfortable in the hand and I definitely prefer the leather wrap compared to the Plus with the suede feel. I’m sure the boost capability of the Pro will appeal to some and to some it won’t make a difference who don’t know any better.

One thing that I always forget about Voopoo products is once the screen goes dark, you can’t just pick it up and vape on the first fire button press. It’s kind of a safety feature in case you hit the button while picking it up so it doesn’t fire on you. So you have to press the button twice the first time after waking it up to fire the tank. It sounds like a really simple thing but even after using the Plus, Pro, Argus Gt, and some others, I still forget at least once a day. One other thing that I thought was nice was I thought I had a scratch on the screen not realizing that the screen has a plastic film screen protector on it. I just peeled the film off and no more scratch.

Are you wondering if I would recommend this mod? Yes, I definitely would. I really like it and plan on continuing to use it for some time. Here I am at the end of another review. I’d like to thank Chloe and Voopoo for sending the Drag X Plus Professional edition mod for this review. Also a big thank you to the readers. It’s very much appreciated. Below is a link to the Voopoo site if you’d like to take a look.

VOOPOO VAPE Spark Your Moments

Hi everyone and I'm delighted to be here! Like many, I suppose, I stocked up on mail order supplies while I could, but now have an issue since I'm an old retired vet with disabilities and this makes store runs a major ordeal. I need cartomizers (atomizer + tank) for standard Ego batteries and wonder if there's any online vendor doing that these days via a carrier that works. I'm still good on juice. Any links REALLY appreciated and thank you so much!

For sale is a neat little kit from Aspire. If you have a Nautilus X tank, you can use this kit to convert it to an RDTA.

Also in the kit: a 22mm black RDA, squonk pin, additional airflow barrel for squonk mode, and other bits. So, even without the Nautilus X tank, there is a lot to like here. (MVS carries the tank, FWIW). Kit is brand new, never used.

$14 shipped via USPS First Class mail. Payment PayPal F&F. Thanks!

For Sale: DOVPO Topside Dual 200 W Black

Price: $ 80

Condition: Brand New sealed and Unopened

Payment: PayPal or Check

Shipped when payment received or check clears.
Shipping included and will only ship to Continental USA only.

Thank you for viewing.

Hi ECF,
I was looking to upgrade my tank. I currently have the first Berserker MTL RDA but I've had my eye on the BP Mods Pioneer MTL RTA. Is it a good upgrade over the Berserker or I wont get much of a difference?

In need of the rebuild kit for the Grand. Mine is worn out!

An outstanding UK-based brand, Zeus Juice has gone from strength to strength since their beginnings all the way back in 2011. Now one of the leading and quickest selling e-liquids in the UK market, we caught up with the owners Paul and Tim to find out a little more about this exciting e-liquid brand.

Read the interview here: Vape Superstars: Zeus Juice

Siren MTL RTA V4 is an excellent RTA compatible with all 510 thread device. It can hold 2ml e-juice capacity(Replacement Glass Tube is included in the package). With center-located honeycomb-style airflow holes, Siren MTL RTA V4 allows the airflow to come up straight under the coil. Featuring leakproof bottom airflow system and semi-hidden AFC structure, it would bring dense clouds and flavorful taste. Single-coil two-post style deck enables an easy coil-building and leaves enough spaces for more possibilities on the coils. Digiflavor Siren MTL RTA V4 Tank adopts 510 long/short drip tip and 4 kinds of MTL coils to bring excellent MTL vaping experience and DIY fun for vapers and cloud chasers.


Digiflavor Siren MTL RTA V4 Giveaway, 1 winner, ends on July 27th

Enter here

Lost Vape Hyperion DNA 100C Box Mod⁠ built in the newest DNA 100C chip that created an unprecedented vaping experience, making it stronger than ever in terms of durability and functionality. Hyperion DNA 100C Mod inherit the excellent top-notch and high-end quality of lost vape, it is built with authentic leather to make it comfortable to hold in your hand. Powered by a single 21700 battery, it offers max 100w output to meet all your needs for sub-ohm and RDA vaping. Also, it is compatible with a 20700 or 18650 battery with the help of an adapter. The single battery compartment design makes Hyperion DNA 100C light and small, but very powerful. Moreover, comes with evolv's escribe software, Hyperion DNA 100C offers a wide degree of customization and allows you to configure, monitor, and modify exactly the way you want. The powerful IP68 military grade Tri-Proof makes Hyperion DNA 100C withstand water immersion up to 1 meter for up to 60 minutes, or completely dust-tight and prevent the ingress of dust, and easily against accidental drop and collision. Charging by 3A Type-C Charge, it is faster than most of the ordinary 2a charge devices on the market. waste less time on charging, and enjoy more time on vaping. Based on the extremely accurate temperature control mode, the Hyperion DNA 100C is able to reach temperature quickly and flawlessly for all of the most popular coil materials.

Parameters:
Size: 44.5* 34.5* 95mm
Material: Zinc-Alloy & Liquid Silicone Rubber
Battery: Single 21700/20700/18650 Battery（Not Included）
Power Range: 1-100W
Input Voltage: 3.0V-4.2V
Output Voltage: 0.2V-9.0V
Current Range: 0.5A-30A
Screen Pixel: 0.9“ 80*160
Temperature Range: 200℉-600℉
Resistance range: 0.1Ω-3.0Ω
Coil Material supported: Nickel, Titanium, SS316, KA1, Ni80, Ni90

Features:
Newest DNA 100C chip, military-grade materials
Authentic leather-covered, comfortable to hold in your hand
Powered by single 21700/20700/18650 battery, max 100W output
Military-grade tri-proof, IP68 Waterproof, IP68 Dustproof, Shock Resistant
3A Type-C fast charging
Evolv’s Escribe software, firmware upgradable: replay and boost modes, preheat function, temperature protection
Atomizer protection
Low resistance protection
Short circuit protection
Overheat protection
Low voltage step down protection
Reverse Polarity protection

Packages:
1* Hyperion DNA 100C Box Mod
1* TYPE-C Cable
1* 18650 Battery Adaptor
1* User Manual

Digiflavor Siren MTL RTA V4 is an excellent RTA compatible with all 510 thread device. It can hold 2ml e-juice capacity(Replacement Glass Tube is included in the package). With center-located honeycomb-style airflow holes, Siren MTL RTA V4 allows the airflow to come up straight under the coil. Featuring leakproof bottom airflow system and semi-hidden AFC structure, it would bring dense clouds and flavorful taste. Single-coil two-post style deck enables an easy coil-building and leaves enough spaces for more possibilities on the coils. Digiflavor Siren MTL RTA V4 Tank adopts 510 long/short drip tip and 4 kinds of MTL coils to bring excellent MTL vaping experience and DIY fun for vapers and cloud chasers.



Features:
1. 2ml PEI chamber, leakproof top filling design
2. GTA design deck, easy to build and trim
3. 22mm diameter, fit for 510 thread device
4. Semi-hidden AFC structure, precise airflow
5. Long/Short drip tip options, MTL vaping
6. 4 kinds of MTL coils for DIY fun
...

Click here for more:

Digiflavor S MTL RTA V4: Digiflavor S MTL RTA V4 Atomizer

Description:
Novo X Kit is an upgraded version of the Novo series, which comes with a stylish, ergonomic, and portable design. Powered by an 800mAh battery, it has an adjustable power range of 1-25 wattages. And it utilizes a delicate power button and a trigger system to offer you great convenience. And it is also equipped with a 0.49-inch OLED screen to display the key data. In addition, inhaling through the mouthpiece to start your fresh vaping, will provide you with style and comfort. Besides, it is compatible with two 2ml pods: a dual-coil 0.8ohm pod and a single-mesh 0.8ohm pod, allowing you to enjoy top-level MTL vaping with a satisfying throat hit. Moreover, it adopts a Two-way U-shaped airflow channel to bring you ultra-smooth vapor. Just get one to explore a brand new vaping experience.


Main Features:
1. 2ml e-liquid capacity with side filling design
2. 800mAh internal battery with 25W max output power
3. 2 pod cartridges for your option: DC 0.8ohm MTL Pod and Meshed 0.8ohm Pod
4. Adopts a small power button and 0.49-inch OLED display
5. Supports power adjustment with a click
6. Starts your fresh vaping by inhaling through the mouthpiece
7. Two-way U-shaped airflow channel for smooth vapor
8. Provides a variety of protective functions to ensure that you vape more safely


Specifications:
Brand: SMOK
Product Name: Novo X Pod Kit
Size: 26.5*16.5*92mm
Battery Capacity: 800mAh
Standby Current: < 50uA
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-4.0V
Output Power: 1W-25W
Resistance Range: 0.40-3ohm
Charging Voltage: 800mAh
Charging Current: Max 0.68A
Overcharge Voltage: 4.3V
Overdischarge Voltage: 2.4V
Overcharge Current: 1.75A
E-juice Capacity: 2ml
Filling Type: Side Filling


Package Contents:?
1 x novo X Device (800mAh)
1 x novo X DC 0.80ohm MTL Pod (2ml)
1 x novo X Meshed 0.80ohm Pod (2ml)
1 x USB Cable
1 x User Manual