Lost Vape Thelema DNA250C Mod Limited Edition

Thelema DNA250C Mod Limited Edition provides three series for your choices, each series contains 4 covers of different colors. It is a box mod that powered by the top-tier DNA chip and is a combination of classic and stylish. It can offer 200W max output power with dual 18650 batteries. Thelema DNA250C Mod features firmware upgrade and accurate temperature control. You can get the flavor and satisfaction of the "perfect puff" with Replay mode, you can also reach your desired vapor output faster with Boost mode. The magnet battery door not only brings a strong connection between battery door and mod, but also provides smooth and convenient battery replacement.


Details:

1. 200W max output power
2. Powered by dual 18650 batteries
3. Magnetic battery cover
4. 0.96 inch screen
5. Advanced DNA250C chipset
6. Firmware upgradable, accurate temperature control
7. Replay/boost mode
8. The combination of classic and stylish
9. USB fast charging
10. Built with a range of high-quality genuine leathers
11. Multiple protections: Atomizer/Low Resistance/Short Circuit/Overheat/Low Voltge Step Down/Onboard Reverse Polarity Protection





IJOY Captain AirGo Kit

Captain AirGo Kit is the first auto-draw military grade IP68 Tri-proof Pod Kit, it is powered by built-in 930mAh long-lasting battery. IJOY Captain AirGo Pod Kit features Univ Pro3.0 chipset to provide multiple protections, it is easy to operate and safe to use. Additionally, Captain AirGo comes with 5.5ml large capacity for daily use, it adopts upgraded 0.8Ω coil for amazing flavor and longer life-span. What's more, the new injection molding technology brings ultra portable and stronger design.


Details:

1. The first auto-draw IP68 tri-proof pod kit
2. Upgraded 0.8Ω coil, amazing flavor&long life-span
3. Univ pro3.0 chipset, simple operation and safe to use
4. 5.5ml large capacity, best flavor on the go
5. Type-C fast charging, 930mAh long-lasting battery
6. Ultra portable and stronger design
7. New injection molding technology
8. Direct vaping through air-sensor or one button






Vapefly Brunhilde SBS 100W Kit

Brunhilde SBS Kit is a cooperative project between Vapefly and German Community. It consists of Brunhilde SBS 100W Mod and 4ml Kriemhild II Tank W Version. Brunhilde SBS 100W Mod is a powerful mod of 5-100W output wattage and VW/Bypass/TC output mode. It supports single 18650/20700/21700 battery, features type-c 5V 2A fast charging. Kriemild II W Version adopts the Duplex™ mesh coil that will fire up instantly, heat evenly and create soft, delicate taste. Available in Blue, Red, Rose Gold, Silver, Pink, Gunmetal, Black. The Rhinestones only for DIY fun, and are included in the package of pink & rose gold & red colors.


Details:

1. Vapefly & German Community project
2. Consists of Brunhilde SBS Mod and Kriemhild II W Version
3. CNC 5-axis carving processed
4. 1800 seconds for carving a single wing
5. Typical Brunhilde design, German standard
6. Aerospace aluminum casing, light in weight, perfect in hand
7. VW/Bypass/TC output mode
8. 5V 2A type-c fast charging
9. Supports single 18650/20700/21700 battery
10. 3S chip brings safety protections: Short Circuit/Reversed Battery Connection/Low Voltage/High Temperature/Over Charge/10s Cut off Protection

Today we are gonna to introduce the latest Yocan UNI Twist vape mod UK.From the outside, it's not flashy, but it's powerful, and if you expect it, read on!

Yocan box mod UK cheap have chosen to house the device in a sleek but durable body that gives the Yocan UNI Twist the advantage of a sophisticated look and a hard exterior. The Yocan UNI Twist uses a solid quality zinc alloy shell. Compared to earlier UNI models, the Yocan UNI Twist not only looks but also feels premium.

Yocan outfitted the UNI Twist with USB-C charging to give it both the benefits of a newer and a more advanced charging technology but also to allow the Yocan UNI Twist to keep up with the advancing trend in vaporizers. What this means for consumers is faster charging times as USB-C boasts a charging speed of about 20 times faster than a basic USB.

The Yocan UNI Twist offers a decent temperature range of 1.8 volts to 4.2 volts which gives you a good spread where you can choose to extract the flavorful and potent effects of your oils and wax concentrates. With a total of six temperature profiles available, you can get a superior vaping experience regardless of the extract you’re consuming.If you wanna learn more about Yocan UNI Twist,please click our official website:UK Vape Shop Online, Best E-Cigs & E-Liquids Store

SPECIFICATION
Material:Zinc-Alloy Shell
Size:32.5mm x 22mm x 67mm
Battery:Built-in 650mAh
Charged through:USB Type-C
Output Voltage:1.8-4.2V
Preheating:10s (Activated by clicking the power button 2 times)
Compatible with Atomizer Diameter:≤12mm
Colors: Silver / Black / Red / Green / Blue

Quick Link:Yocan UNI Twist Vaporizer Box Mod 650mAh

IJOY Captain AirGo Pod Kit 930mAh


Efun.top new arrival New Arrival
Sale Products In Stock

New Arrival | Smok RPM 4 Pod Kit -ECigMafia



Specifications:

Size: 103m*25*27.9mm
Weight: 102g/107g*
Battery Capacity: 1650mAh
Power Range: 5W-60W
Standby Current: <100uA
Input Voltage: 3.3V-4.2V
Output Voltage: 0.8V-4.OV
Resistance Range: 0.2Ω-2.5Ω
Charging Voltage: 5V±O.2V
Charging Current: Max 1.5A
Overcharge Voltage: 4.3V±O.05V
Overcharge Current: 2A±O.6A
Over-discharge Voltage: 2.4V±O.05V

Package Content:

1x RPM 4 Device (1650mAh)
1x RPM 4 LP2 Pod (LP2 Meshed 0.23Ω DL Coil Preinstalled) (5ml)
1x RPM 4 RPM Pod (RPM Mesh 0.4Ω Coil Preinstalled) (5ml)
1x Type-C Cable
1x User Manual

Hi everyone.. I'm curious to if anyone has switched from freebase subohming to nic salts.. What my perceived benefit would be to vape less.. I'm probably in a weird case.. I'm vaping 12-18mg currently and have been for years.. I work at home and I'm going through about 5-7mls a day.. I'm wondering if anyone else has switched over and did it make you vape less?

Thanks!

It seems that regulations have changed. My 5 year old bottle of 100mg nic base is almost empty, and I’m having trouble finding more. Who are the current sources?

So these are my thoughts on the new Requiem BF kit from Vandy Vape after about a weeks use. I am going to sperate this out into two parts, 1 - The RDA which I have not used and 2 - the Mod that I have been using exclusively for the past week or so. I purchased the Gun Metal Version.

First the RDA. So the RDA is a 22mm and the airflow feels restricted direct lung. Since I have not used it yet, the only other thing I will say is that it feels cheap. Both caps are plastic of some kind and the feel is not great. The base is metal, but the feel is not great. I am not sure how this compares to the original Requiem RDA as I do not have one. This doesn't bother me as I wanted just the Mod and only the kit is out now. I may be more upset if a Mod only version comes out and it is $20 cheaper cause this RDA is not worth that.

Now the Mod. So for performance I am using the Gorge RDA with a single 3mm SS round wire coil coming out to .37ohms. Since this is a mech I am using brand new Molicel P26A batteries. I have some thoughts on these below as this is the first time I am using them.

Look and feel - This is a very small Mod, much smaller than I was expecting. I guess the reviewers I watch all have small hands cause it didn't look this small. The Mod unlike the included RDA, this Mod is solid and heavy, like use it for brass knuckles heavy. The weight feels very good in my hand. Hard corners on the front, rounded on the back, and it feels very good in the hand (I have very Large meat hooks).

The 510 is adjustable, and a 24mm RDA fits, but the plate is only 22mm so there is an ever so slight raised look that I don't notice unless I look for it. If you have OCD this may bother you.

The Shut of Switch works. Inside the battery fits very tight and I am using a ribbon I have to wrap around the battery to make it easier to get out. Without it you are doing the smash the mod on your hand thing. It would have been nice if they included one since they sent battery wraps.

The contacts are easy to remove for cleaning, and while I haven't done the 510 yet, it looks like I can do it with my fingers. I will update this post if I have troubles. Being able to easily disassemble a mod for cleaning is a plus to me.

The bottle is the only really big negative I have. First it is small - maybe 5.5ml of juice capacity. The fill method they added doesn't work unless you are using a syringe and the cap part is way too big. If they would have put a normal cap I bet they could have gotten 2ml more in the capacity. The feel of the bottle is perfect just firm enough. For now I am using the stock bottle as it is working for me based on the battery performance I am getting. If you are looking for other bottles, they do need to be short as the space the 510 takes up is on the larger size. The bottles from the pulse will not fit (too tall). I had some random SNK bottles I bought in my spares bin that fit fine though.

Performance - this Mod hits nice. I do not bothered to measure the voltage drop, but based on other mods I have this is very low. With the Molicel and my build, I get two bottles out of it between battery changes.

Overall I will be getting another of these and I think I have found my daily driver. I have not put this down since it came in.

A note on the Molicel P26As - Mooch did testing on these so you can see the numbers in his blog, but performance wise, at the start they hit a little lower than the Sony VTC4s but keep a more consistent vape through out the life of the battery. I have been using VCT4 to this point and I bought these cause they were on sale and had good testing results and I can say I think I will be switching to these from now on.

Some Pics below - let me know if there are questions

Hey guys. Today let's look at another new pod system by Joyetech named EVIO Box Kit. If you like square pod vapes, then don't miss out on it.

The appearance of Joyetech EVIO Box is compact and lightweight, using AST steel technology, which improves flavor transfer and extends the winding life. EVIO Box equipped with an integrated battery with a capacity of 1000 mAh, which is charged with a modern USB Type-C connector. You can quickly replenish the reserve of autonomy using a current of up to 2A. Comes with LED indicator to shows the user three vaping modes: High, Medium, and Low.

Also, the Fire key can switch vaping modes. In addition, the EVIO Box by Joyetech vape will be a vibration prompt that is triggered when the cartridge is installed, when the battery is discharged and when there is little liquid left in the cartridge. As for the pod cartridges, a capacity of up to 2ml and two vaporizers in the kit (EN 0.8ohm and EN1.2ohm), they are backward compatible with those of the previously released Evio C Pod. Moreover, the primitive airflow adjustment is available by inverting the cartridge.

Check for more details here: Joyetech EVIO Box Pod System Kit 1000mAh

You may also like:
geekvape z max price
morph pod 40 review

A novelty from the "almost luxury" brand Lost Vape. As you know, these guys especially respect the creativity of the foreign company Evolv, so they can't ignore the release of the new chipset at all. So, let us get acquainted with the new Scutum DNA 100C mod.

Feature:
Dimensions: 95 x 44.5 x 34.5mm
Body material: zinc alloy + liquid silicone + leather
Power supply: 1 x 18650/20700/21700
Chipset: Evolv DNA 100C
Output power: 1 - 100W
Range voltage: 0.2 - 9.0V
Operating mode: VW, TC (NI200, SS, TI), TCR, Reply, Boost, Preheat
Temperature range:200 ℉ - 600 ℉ / 100 ℃ - 315 ℃
Supported resistance: 0.1 - 3.0Ω

The Smok novelty design is very good, but the developers absolutely did not provide any new content. For decoration, there are leather inserts and metal moldings, which can solve all these aesthetic feelings.

Although the control chipset has changed, the control panel element set has not changed. There is an enlarged activation button on the top of the box mod. Compared with the previous chip model, the display color is slightly lower and the diagonal lines are reduced.

Other kits we recommend:
cheap geek vape l200
cheap uwell yearn 2

Hi all,

Curious if anyone knows which 510 the boxer bf mech mod is using ? It has a very large contact “collar” Unfortunately that 510 design isn’t great if you dissemble frequently to clean, the tiny collar screw strips extremely easily and I can’t seem to find that one tiny screw, weirdly. I’m also in Europe so trying to get parts from ginger wouldn’t be cost effective.

Second to that, and about more than just the mech bf, has anyone dyed their boxer back to glory? Maybe it was living in a sunny place but they certainly faded quickly for me and I have a few I’d like to get back to black. In the case of the mech it’s easy enough to dunk, or I can “paint on”. If necessary I can take apart the regulated too but meh.

Cheers!

Uwell Havok V1 presents an impressive and handsome pod system that is suitable for MTL as well as DTL, or RDL, and therefore meets almost all requirements. A resin-style panel is embedded on one side of the device. In addition to the standard power button and a pair of adjustment buttons on the control panel, a 0.96-inch OLED screen for a clear display of all data is added. The upgraded Type-C port is located at the bottom of the device. The battery capacity of the device is 1800mAh with a 65W max output, it's sufficient for your whole day vaping and cloud chase. Fast charging at 5V/2A high charging rate through Type-C port. There's no draw activation on this, you have to press the button to fire. With a single button control quickly click the fire button 5 times to turn on/off the device, safe and reliable. Driven by a smart chipset, the Havok V1 can auto-detect the installed coil and matches the wattage accordingly to improve coil lifespan. The chip has multiple circuit protection functions to supply stable, safe, and reliable performance. In addition, Havok V1 also comes with a Puff counter and device lock function: Puff counter records your daily usage. Press the fire button and "-" button at the same time to Lock/unlock the device, prevent the accidental operation from causing equipment failure.

Havok V1 Pod is made from a dark translucent PCTG that uses magnets to stay at the top of the device. It is a refillable pod with top filling, cost-effective to use. The capacity is 4ml, with a sliding cover top filling system.




Features:
1. Pro-FOCS flavor testing technology
2. Intelligent Coil Recognition
3. 1800mAh Internal Battery
4. Max 65W Wattage Output
5. 0.96-inch OLED screen
6. Type-C USB Port - 5V/2A Fast Charging
7. Puff Counter
8. 4ml Refillable Pod
9. Sliding Top Cap - Top Fill System
10. E-liquid Level Window
11. Airflow Valve - Adjustable airflow
...

Click here for more:

Havok V1 Kit: https://www.healthcabin.net/uwell-havok-v1-pod-mod-kit-p/26899.html

Havok V1 Pod: https://www.healthcabin.net/uwell-havok-v1-pod-cartridge-p/26929.html

Havok V1 Coil: https://www.healthcabin.net/uwell-havok-v1-replacement-coil-p/26928.html

Hey guys,

I’m new to vaping. I have been a heavy 2 pack a day Marlboro light smoker for 20 years. I recently got into vaping and so far it has been an amazing journey!

I started with a small pod device (Caliburn) with 16MG nic salt. I found that I was still not able to quit smoking. I went back to my local Vape shop and got some 20mg nic salt juice, and that was too strong! It made me dizzy and confused and I just felt unwell. Even though @20mg I was getting a lot of nicotine I still wanted to smoke a cigarette.

On a whim I decided to give sub ohm vaping a try. I got myself a Lost Vape Thelema DNA 250c + a Freemax Mesh Pro 2 tank. I opted with 6MG freebase juice at 70/30. And sure enough it worked! I was able to quit smoking and have been smoke free for a week now!

My question though, is 6MG freebase nic @0.2 ohms (dual mesh), 70-80 watts too much? I feel fine for the most part and my cravings for cigarettes are under control. However from what I’ve read (and what the guy at my local Vape shop says) is that for sub ohm vaping you generally should stick to about 3mg of nicotine.

I know everyone is different, and you should do what works for you. But I’m just worried that with the large amount of Vapor I’m producing 6MG might just be a little risky.

I Vape quite a lot (200-250 puffs a day) and probably somewhere around 15-20ml of juice a day (at 0.2 ohms @ 70w the juice burns pretty quick). As mentioned above I generally feel fine. However sometimes I do feel a bit out of breath and like my chest is heavy. This could be gas (perhaps from inhaling so much air?). Or it could just be me adjusting from cigarettes to vaping. I don’t feel nauseous or have headaches.

Please let me know your opinions. Would really appreciate some advice from more experienced vapers!

Thanks!

Hello everyone! Just started vaping about a week ago. I was a heavy 2 pack a day smoker and have finally been able to quit! I look forward to being a part of this great community!

How do you think of a card-shape vape kit? Like Suorin Air pod kit, Vozol D4 disposable kit, ect, they all got square outline with Ultra-thin size.

If you are interested in this kind of vape kits, now here comes one from SMOK. SMOK Thiner Pod kit. THINER impresses on you with a card style, more creative and space-saving than common bulky vaporizers.



Main Features:
1. Translucent cartridge, side-filling system
2. 0.8Ω built-in Meshed coil for smooth flavor
3. 750mAh built-in battery, output power 1-25W, with a 0.69'' OLED screen
4. Card shape with round corners and smooth lines, portable&delicate

Size: 88 x 43 x 10mm
Capacity: 4ml/2ml(TPD/UK)
Color: Black, Grey, Silver Red, Silver Lake Blue, Silver Blue, Blue Purple

Learn More: (Login first to check better wholesale price)
SMOK Thiner

Elego 10th Anniversary Sale stills on! Join us now to get the biggest discount ever.

Elego provides the most competitive wholesale price for all the vape devices, login to check more latest vape kit with better price!

For any questions about SMOK wholesale or any vape wholesale in China, feel free to contact us.

Freemax M Pro RBA Coil is Freemax’s first rebuildable coil type designed for M Pro and M Pro 2, which are widely recognized as the best sub ohm tanks in the market. What’s more, there are also multiple mesh coils of M Pro Series Coils and SS904L M series mesh coils that are compatible with M Pro and M Pro 2 Sub Ohm Tank. If you are a DIY fan, and also love M Pro Series Tanks, M Pro RBA will be your best choice.

The deck comes with an innovative postless design and creative Honeycomb Turbo Air Hole system, making coil-building easier and more time-saving with less coil waste. The build deck is available for both single and dual coil configuration, single for flavor tasting, or dual for the abundant cloud. You can build your own coils to your desired resistance at ease and customized your favorite vaping modes.



For more information about Freemax M Pro RBA, please enter here>> RBA | Freemax - Taste the Clouds, Feel the Flavors!

https://www.2fdeal.com/search/?Keyword=RST&CateId=$45.9 Hotcig RST Restart 212W TC Dual 18650 Box Mod

The Hotcig RST Restart Box MOD perfectly combines exquisite craftsmanship and practicality, to create a nearly perfect existence. The Hotcig RST MOD displayed in front of you is undoubtedly a huge piece of artwork for users. The Hotcig RST adopts streamlined surface design. The perfect arc not only increases the beauty, but awakens the demand for compactness and convenience. The ergonomic design makes Hotcig RST MOD easier to grasp. It is not a big deal for vapers to hold the device firmly in palms. Powered by dual 18650 batteries, the Hotcig RST MOD fires to a huge output of 212W. The working modes can be easily switched between WATT, BYPASS, TEMP and DIY. The centered 510 thread is capable of taking 24mm tanks without any overhang. The included Type-C charging cables brings a new way for QC too.


https://www.2fdeal.com/search/?Keyword=temple&CateId=$12.9 Vazzling Temple Style 28mm RDA w/ Extra Cap

Features
510 threading
Quick release squonk pin with spare screws set in deck
Two-post build deck deck 6mm juice well
Two 3mm X 3mm post holes
Matching Acrylic heat sink
Matching Acrylic airflow diffuser
Matching Acrylic chamber reducer
Locking top cap and rail system
Spare screws and Orings

https://www.2fdeal.com/search/?Keyword=hussar+the+end&CateId=Coppervape Hussar The End Style 316SS 22mm RTA 3.5ml

Features
Diameter: 22mm;
Capacity: 3.5ml ;
316 stainless steel construction;
PEI tank tube;
Dual posts build deck;
Single coil configuration;
Bottom airflow system;
510 threading connection

https://www.2fdeal.com/search/?Keyword=Boxx&CateId=Authentic Aspire BOXX 18650 Kit 4ml

When you get to know the new product Kizoku Oaker Kit uk developed by the Japanese manufacturer, you will have a new understanding of them.Kizoku Oaker marks the first foray into pen-style vape kits.Let's cheak it out.

Kizoku Oaker Starter Vape Pen Kit UK is a stylish and compact tube appearance for MTL flavor. Kizoku Oaker kit consists of Oaker tube mod and Shima MTL tank. Kizoku Oaker mod, made of SS304, works with 1100mah built-in battery with 3 level adjustable output from 3-3.8V. Shima tank has 510 drip tip and 2.4ml / 3ml capacity with top filling design.

Kizoku Shima is compatible with Kizoku KCL coils and Aspire Nautlius coils. And Kizoku Shima tank supports single coils RBA deck for self winding.You can choose best online vape store uk to learn more.

SPECIFICATION
KIZOKU OAKER Battery
Size:80mm x φ19mm
Battery type:Built-in 1100mAh
Wattage Range:5-25W
Output Voltage:3.0V-3.8V
Input Voltage/Current:5V/1A
Charging port:Type-C
KIZOKU Shima Tank
Size:51mm x φ18mm
Drip-tip Material:Stainless Steel + PC
Capacity:2.4ml
Coil:KIZOKU KCL1 0.7ohm Mesh Coil, DIY coil
Connection:510 thread
Mouthpiece:510 drip-tip

Quick Link: KIZOKU OAKER Kit 1100mAh with Shima MTL Tank

Hello everyone,
I have five mods I would like to sell as a package. Asking $115.00 shipped within Canada. Please contact me for a shipping quote if you are in the US. Descriptions and conditions below each picture. Thanks for looking!



Sigelei Fuchai Duo-3. 175 watt version. Good+ condition. Some scratches/chips along top and bottom edges. Fully functional. Does not come with packaging or accessories except for the 2 and 3 battery doors and 2 new ModShield sleeves.

Vaporesso Revenger X. Fair condition. Scratches and chips all over. Fully functional. Does not come with any packaging or accessories except for a new silicone sleeve.

Smok Alien. Silver Edition. Good+ condition. Some very light scratches on screen and a few scratches at 510 connection. No packaging or accessories except for a new silicone sleeve.

Eleaf Pico S rainbow. Good+ condition. A few very light scratches. No accessories except for the battery adaptor sleeve.

HCigar Towis Aurora squonker. Like new condition save a few light scratches on the screen. Comes with packaging, accessories and 5 new soft silicone bottles.

Pod parameters:

Material and technology：

The pod is made of semi-permeable PCTG, its base is made of POK

Craft: injection molding process

Airflow:

Preset non-adjustable airflow

Filling System:

Pod system

Dimension:
31*28*15.5 mm

Key selling points/ Highlights:

1. Pod capacity more choice is 2 ml and 3 ml

2. The Minican+ uses premium 0.8Ω mesh coil, in conjunction with a constant voltage output, allows the puff more plump and intense.

3. Minican+ is compatible with the Minican pods (with different coil resistance) for more choices which increase the favour

4. The larger battery capacity upgraded from the Minican’s 350 mAh to 850mAh

5. Draw-activated,easy handling

6. 3.7V constant output and quick charging

7. Aspire ASP chipset safety protection.

Hello..any Snow wolf users?

Hello. What device do you recommend to vape 0mg nicotine with 70vg? I would like a mod type pod with a screen. I have read that the 0.3 ohm coils are the best for 70 vg liquids. What can you say to me? Thank you so much.

I know absolutely nothing about it. I have prostate cancer and can't sleep at night due to the pain, I tried a Norco before bedtime, and slept pretty good, but didn't like how I felt in the morning, so just as soon not mess with it.
The daughter in law was telling me about her boyfriend who was in an automobile wreck and used something called RJ something or other. He'd put just a drop on a cracker before bed and it helped him a lot.
I did briefly talk to my Primary care Dr., about the medical stuff, and while not against it, she would be concerned about me becoming dizzy, dis oriented, and fall and break a bone as I have osteoporosis. I want to talk to my Urologist about it, but don't see him till next month.
So anyway, maybe start a convo here and maybe I can become a little more enlightened.

Thanks.

Hello ECF,

I've been creeping for a few weeks now, but finally decided to take the plunge and make an account. After countless hours (days...weeks??!!) of research, hopefully I am at the point where I form some sentences together about what I'm looking for in a set-up and ACTUALLY make sense. I came here asking for help, so please feel free to tell me if you think I made a wrong decision on anything below.

So, here is my story...(cut to end to see the quick and dirty version)

First and foremost, what I WANT out of the build is excellent flavor. Not quite as important but still important is large clouds and a "cool" factor. I'm leaning way towards DTL over MTL, as I never smoked a cig in my life and have no nicotine addiction. This is something that will be used with friends or when I'm bored, so maybe 1-2x/week. I wouldn't say there isn't a budget, but let's say I have no prob paying for the best quality/functioning gear.

For the majority of my research, I was pretty set on going sub-ohm. But more and more I was reading how if you really want flavor, RDA's can't be beat. Then I start thinking about squonking more and more, and now I think that might be the best of both worlds. I get the convenience of the "tank" (not having to drip, which is what I was most concerned with), and all the flavor benefits. Any learning curve with the squeeze and determining the quantity (if you can squeeze too much) should be minimal. I really think it's a good option for me. I'm really curious what the pros think.

Now, surely you'd all make fun of me behind my back if I didn't acknowledge the elephant in the room: the atomizer. I need to learn a lot here, still. Any and all help would be appreciated. Single coil vs. double coil? Mesh? RDA? What I DOOOOO know is I have no problem paying for pre-builts out of convenience, assuming they aren't impossible to find in stock most of the time.

Equal in both importance and the level of my ignorance on the subject is (are?) batteries! I don't want to die, folks. So any recommendations on 1 vs 2 batteries, battery size, is also needed.

Once the battery thing is figured out, I can look at mods. I don't mind paying a pretty penny for a mod, but what I want is function and reliability first. As mentioned previously, I want "cool", but to a point. For reference, what I have been trying to figure out how to buy is something from BMM. So far, all attempts to get into said facebook group have come up short. But I like the challenge of the hunt, and am willing to see what it takes to get. I've looked at numerous other brands, but am willing to hear what you recommend! And regulated?

There doesn't seem to be any shortage of juice on the market. They all sound soooooo good! Lots of opinions out there, too. I looked all over the place for higher-end juice and ordered way too many already (around 1,000 mL). They range in VG from 50 (I fell for 5 pawns)-90ish. Can I smoke that range out of the same coil?

I'm sure I forgot something, but that is plenty to start!! Thanks so much for anyone who took time to read that and for any assistance they can provide.

Quick summary version:

This will be my first vape set up. I know little about the technical side, but have used vapes often over the past few years. I don't smoke (cigs). I think I want a regulated squonk w/ RDA (don't think the learning curve will be that bad), and plan to buy pre-built stuff instead of build my own if that's a thing. I need to find out what battery size and how many to use. Box mod is up in the air, and probably of least importance. Juice ranges from 50-90 VG currently. In the future, I will probably stay closer to 70. Don't let budget prevent a recommendation.

Hello, new here, my friend got caught recently at a roadblock, they don't supply, but are middleman, however, their phone was taken and I have a record of purchase from them on it, any advice what steps to take? Will HSA contact me, and how long will that take?