Guys, have you already participated in the Freemax campaign of " We Vape, We Save!" to win Onnix 20W Green Limited Edition on Freemax official website? It’s a big surprise! Freemax will give away 1000 sets of Onnix 20W Green Limited Edition for vapers. You can not only take part in this activity on Freemax official website, but also enter the other platforms to participate, such as on Freemax official Instagram, Facebook, Forums, and Reddit. Seize the chance from 25th, March to 25th, April! You may be the lucky one.

Freemax Onnix 20W is the only pod for all your needs because it’s designed not only for RDL vaping but also for MTL vaping with OX Mesh Replaceable Coil 0.5ohm and OX DVC Replaceable Coil 1.0ohm for options. What’s more, OX Coil Series are designed to be Freemax’s next pod system atomization platform for the years to come.

Please click here to join>> Onnix We Vape We Save | Freemax - Taste the Clouds, Feel the Flavors!

Hey guys. Today let's check out the DEJAVU Pocket Kit. It is constantly adjusted, upgraded, and improved to make it a simple long-lasting design, easy setting, and convenience.

DEJAVU Pocket Kit features a square body with rounded corners, which is made of aluminum alloy and thermoplastic. The palette contains three kinds of color combinations. The upper platform is equipped with a large knurled thread base and a narrow 510 drip tip. The magnetic cover hides the cartridge and the exposed control panel inside the device comes with three buttons and a 0.49" display screen. The USB Type-C port is located at the bottom. Despite its compact size, this pod system still has good features and can provide variable wattage from 5 to 40 watts and automatically optimize the mode of setting the coil. An adaptive intelligent system, which can identify the best power and prevent the coil from burning cue to high wattage. DJV Pocket is powered by a built-in 950mAh battery. This may seem small, but it is quite sufficient for such a small pod system.

The cartridge is hidden under the removable cover inside the mod and has a capacity of 2ml. Refilling is done via the upper side of the cartridge. The front of the cartridge has a hole covered with a plug that cannot be removed. The kit comes with a 0.6ohm mesh coil and a 1.0ohm regular coil, which can bring excellent flavor and moderate vapor generation. 0.6ohm mesh coil is suitable for the half-free draw; 1.0ohm regular coil is suitable for the tight draw. On DJV Pocket, you can install the already manufactured RBA base, but you must purchase it separately, not included. In addition, the vape SMOK RPM series coils are very suitable for this equipment. In this packaging you will find two 510 drip tips, one drip tip(higher) focuses on MTL vaping, the second drip tip(lower) is more freely. They are fixed in a metal base and then screwed into the main body of the device.

Check for more details here: DEJAVU DJV Pocket 40W AIO Pod Kit 950mAh

You may also like:
geekvape aegis max price
cheap aegis boost coils

Today,I will introduce the Eleaf iSolo Air Pod Mod Kit uk to you.This is one of the most popular products recently. What attracts consumers?Let's take a look at it.

The Eleaf Isolo Air 40W Pod Mod Kit uk,constituted by alloy and leather, is a portable MTL Pod Mod with an ergonomic curved design. Eleaf Isolo Air has a built-in 1500mAh battery with a maximum output of 40W. Isolo Air pod mod kits feature adjustable double-slot Air flow valves to control Air inlet. Eleaf Isolo air cartridges have a 2ml capacity and a bottom filling design. The Eleaf Isolo air pod is compatible with the Eleaf GTL coils. Eleaf Isolo Air is available for MTL/DL vaporization upon coil request.Visit online vape shop uk to buy.

SPECIFICATION
Size:91mm x 34mm x 27mm
Weight:90g
Battery Capacity:Built-in 1500mAh
Output Wattage:1-40W
Resistance Range:0.2ohm-3ohm
Charging:5V/2A(USB-C)
Pod Capacity:2ml
Filling Type:Bottom Filling
Coil:GTL 0.8ohm Coil (Kanthal, 12-18W);
GTL 1.2ohm Coil (Kanthal, 7-13W)
Airflow:Adjustable
Colors:Blue, Red, Dark Brown, Light Brown

Quick Link:Eleaf iSolo Air Pod Mod Kit 1500mAh 40W

$51.99 Eleaf iStick S80 Kit

iStick S80 Kit applies the intrecciato design to the metallic finish, bringing unprecedented texture and luxury. With metallic and compact design, it will give you the most solid and comfortable hand feeling. Powered by 1800mAh built-in battery, it can fire up to 80W max output. And charged via safe and reliable Type-C 2A fast port, it also helps you save time. In addition, there are 2 modes available: Smart Mode and Power Mode. Besides, it is compatible with 3ml GZeno Tank, which comes with GZ 1.2ohm coil for MTL vaping and pure flavor. And it adopts convenient top filling and precise airflow adjustment with 5 airflow holes. May you obtain great joy with iStick S80!


Details:

1. Apply the intrecciato design to the metallic finish
2. 1800mAh built-in battery and Type-C 2A port
3. Provide Smart Mode and Power Mode
4. 3ml GZeno Tank and GZ 1.2ohm MTL Coil
5. Convenient and easy top filling
6. Precise airflow adjustment with 5 airflow holes
7. 0.96-inch screen
8. Come with multiple protections: Over-charge, Over-discharge, Over-current, Over 10s, Short Circuit and Reverse Polarity Protections





$32.99 iStick S80 Battery

iStick S80 Mod is compatible with iStick S80 Kit and GZeno Tank. It innovatively applies the intrecciato design to the metallic finish, bringing unprecedented texture and comfortable hand feeling. Powered by 1800mAh internal battery, it can fire up to 80W max output power. And it utilizes Type-C 2A fast and safe charging port. Besides, it supports 2 modes: Smart Mode, which will adjust the output automatically according to coil resistance, and Power Mode, which allows you to enjoy freely adjustment. And it is equipped with a 0.96-inch screen to show clear information and provide convenient operation. Moreover, it is designed with multiple protections to ensure your safety.


Details:

1. Apply the intrecciato design to the metallic finish
2. 2 modes for your option: Smart Mode n Power Mode
3. 1800mAh internal battery and Type-C 2A fast port
4. 80W max output power
5. 0.96-inch screen
6. Multiple protections: Over-charge, Over-discharge, Over-current, Over 10s, Short Circuit and Reverse Polarity Protections

If I remove some of this mesh coil, will it raise the ohms?

Forbidden Island - Maui Looking to satisfy that sweet tooth of yours but don't want a rich dessert flavour? Maui is a safe bet! Lychee, Peach and Apple complement each other perfectly in a cocktail of flavours that would be great on the beaches of Maui itself.


Login to view embedded media

Hi there
I need recommendations for a tank & this seems like a really good forum for that.

I live in Denmark & think pretty much every tank is available to me. Prices aren't that high, so it fitting my needs closest is more important.

What I need;

• Top fill, minimum of 60 Watt, between 0.1-0.5 ohm.
  100% leak proof, also for laying horizontally.
  I can't handle a metal drip tip. If it is metal, need there to be a replacement drip tip available for purchase that fits.
  
  
• Bottom must be screwed on - I almost bought the Aspire Cleito but turns out the bottom is just sliding down a piece of rubber.
  It will come off rather sooner than later, I'll pull it up from my pocket mainly by the tank.
  

I had the Aspire Nautilus. What was so awesome about it, the top was a screw on slide fill! It's just not powerful enough.

I really need some help, thank you

Well , it happened. Went in the bathroom, set my Dovpo VV by the sink. Bumped it and it fell. The mod bounced and landed in the trashcan but the battery door landed...you guessed it...in the toilet. And with a short string of creative profanities, I took the plunge. Retrieved the panel . I'm very happy it was just the panel and not the mod. Still not happy about having to stick my hand in the toilet though.

Digiflavor Drop RDA V1.5 24mm

When I received the package from the courier I did not expect a very large package, I was in fact waiting for the Drop RDA V1.5 24mm, but the pleasant surprise was to find two more new Digiflavor branded items that I will discuss later in agreement with Shenzhen GeekVape Technology Co., Ltd.
Enjoy the reading.

Package contents:

1 x Drop V1.5 RDA
2 x N80 Fused Clapton Coil 28ga * 3 + 40ga Ø3mm of 0.4Ω Nichrome.
2 x Cotton laces
5 x Spare O'ring
4 x Spare screws
1 x Pin BF
1 x Triangular tool



Characteristics declared:
* Construction materials: Steel, aluminum
* Size: 24x42mm
* Weight: 50gr
* Rebuildable Double / Single Coil Deck
* Drop system, easy to regenerate and cut the coil legs
* Support DL and RDL vaping
* Multi-slot airflow control
* Drip Tip 810
* Compatible with squonk mod via BF pin



Currently Digiflavor Drop RDA V1.5 24mm is offered in eight different color combinations.
Available colours:



I received the Black / Blue version of the RDA V1.5 24mm for this test and the first thought was to install it on my black Aegis Squonk for an excellent aesthetic result in my opinion.
Aegis squonk is a small and comfortable Mod, with its single 18650 cell it manages regenerated RDAs in single coil, but also in dual coil if you are satisfied with the limited autonomy at high wattages, however to manage the Drop RDA V1.5 24mm beyond i 40 / 50W it would be better to use a device with dual 18650 cells, so I did other tests with different Mods to which the Drop always matches in a pleasant way.



Digiflavor Drop RDA V1.5 regenerable with single or double coil, has a diameter of 24mm, has a multi-airslot AFC with rectangular windows arranged vertically on the sleeve to regulate a myriad of holes made on the bell below.
With so many adjustments Drop RDA V1.5 is suitable for both DL and RDL vaping.
Compared to its predecessor (Drop V1) we therefore find a redesigned AFC system, while the deck maintains the classic DROP bridge with four large holes above four uprights that are gold-plated for better conductivity.



The plastic Drip-Tip is held by an O'ring positioned inside the Top-Cap (bell). The Top-Cap made of aluminum has the task of dissipating the heat and regulating the flow of air by rotation, on the upper part several "teeth" with a helical texture have been made that resemble those of a gear, this design in addition to being beautiful makes it much easier to grip.




A large o'ring at the top allows the bell to rotate smoothly during the AFC adjustment phase, on the bell there are several openings for the passage of air, on this surface we find a total of 72 holes of Ø0.8mm and two slots of 2x6mm.
Starting from the top on each of the two sides we find these openings arranged in 4 rows positioned at different heights, the first row at the top has 4 holes, the second row 8, the third row 12 and the fourth and last row has 12 plus the 2x6mm slot.



The internal part of the Top-Cap (bell) measures 20mm in width and 18mm in depth, the upper vertex has a rather pronounced tapered area.



The newly designed outer sleeve has 4 slots arranged vertically to effectively adjust the height, width and side the air flow directed towards the coils.

With rotation from right to left, the AFC combinations allow these many variations:
- A vertical row of 4 holes (+ 4 holes)
- Two vertical rows of 8 holes (+ 8 holes)
- Three vertical rows of 12 holes (+ 12 holes)
- Four vertical rows of 16 holes (+ 16 holes)
- Three holes at the top of the first slot + 12 holes below (x2)
- Two holes at the top of the first slot + 12 holes below (x2)
- One hole at the top of the first slot + 12 holes below (x2)
- No holes on the first slot + 12 holes below (x2)
- Three holes at the top of the second slot + 8 holes below (x2)
- Two holes at the top of the second slot + 8 holes below (x2)
- One hole at the top of the second slot + 8 holes below (x2)
- No holes on the first and second slots + 8 holes below (x2)
- Three holes on the third slot + 4 holes below (x2)
- Two holes on the third slot + 4 holes below (x2)
- One hole on the third slot + 4 holes below (x2)
- No holes on the first, second and third slots, Buttonhole (+ Buttonhole) at the bottom fully adjustable (x2).

Hi folks,
I finally quit smoking around a decade ago. This site is partly responsible because I read some good e-liquid suggestions and finally found one that I've used ever since. Problem is, I've been ordering it from a shop that's about 600 miles away and I don't want to have to drive there to get it. I'm hoping to find some good suggestions for DIY. I really don't want to start smoking again. Thanks in advance for your advice.
-Philly555

Today to introduce DEJAVU DJV Pocket AIO Pod Kit, powered by 950mAh internal battery to fire up to 40W (5-40W) by DEJAVU DJV.
DEJAVU DJV Pocket 40W VW AIO Pod System Vape Kit, a compact and portable All-in-One pod kit, is monitored by upgraded Ronin X RX40 chip, which allows it to intelligently identify the best power and prevent the coil from burning cue to high wattage. In addition, DEJAVU Pocket AIO Kit has RBA mode for users to use coil with lower resistance. Constructed from aluminum alloy and PCTG, DEJAVU DJV Pocket AIO kit is compatible with RBA coil for (not included) and comes with DB OCC mesh coils: 0.6ohm DB OCC mesh coil and 1.0ohm DB OCC regular coil.

Adaptive intelligent system, which can identify the best power and prevent the coif from burning cue to high wattage
RBA mode available for users that use coil with lower resistance
RPM coils compatible (not included)
Type-C port charging
Dimension: 54 x 20.5 x 68.4mm
Resistance Range: 0.5-3.0ohm
Display: 0.49 inch OLED screen
Input Voltage: 3.3-4.8V
Capacity: 2.0ml
Filling Method: Side filling system

More details about DEJAVU Pocket 40W VW Variable Wattage AIO Pod System Vape Starter Kit, Please Check >> https://www.3fvape.com/48690-dejavu-pocket-40w-vw-variable-wattage-aio-pod-system-vape-starter-kit.html

Hi! so i broke my tank glass and i need to replace it asap,the thing is the exact same glass for this tank is hard to find, is there any other compatible glasses for this tank?

Hello peeps...

Soo I updated the vaporesso gen mod with the the latest firmware available and btw its the same as the Gen s for obvious reasons lol....and it's the Gen s ver 1.00 20200608

The thing is that one of the changes is the puff counter that is now just called puff in the menu and it's visible in the main screen also which is nice....

The thing is that in the menu now it looks like this...
See the the 7 different numbered thingys?
Each one can record up to 999puffs and when I saw it I thought that it was like that so u can choose which number u want and then record the puffs there so that u keep different records of puffs.....OR that is just this way and when reaches 999puffs it switches to next number counter until all is full...

The thing is that no matter what I do it doesn't seem u can choose any of those numbers even tho the pointer scrolls to each of them....
on the main screen shows always the number of all puffs combined and I can't see the point of this...lol
But inside this numbered puff menu u can see it randomly switches to different numbered counters and records at those like from number 2 to 1 and then to 2 again and then to 3 without any of those go full...I can't figure out what is going on...I tried many things in an attempt to see what is making it change but can't figure it out...

So if anyone knows how this thing works pls tell me cause ok I know it's not the most important thing lol but it drives me crazyyyyyyyyy not to know how it works lol

Where do you put the juice when you change your coil or clean the tank?

I will be going on vacation in two weeks, I know you're allowed to take liquid but it has to be a 3ml bottle but you can take a few. Where can I find 3 ml bottles online that I can fill with my Vape juice? Or if any of you have any suggestions, I will be on vacation for 6 days.

I have not personally verified this information. But, I heard that these shipping networks are now shipping Eliquids to once banned states.

Can anyone verify?

Hey guys, in search for the Wismec Reuleaux RX2/3 TC Mod 150W/200W with the 2/3 Cells mod. My first color choice is the all black one and my 2nd choice is the silver/gray colored. I was going to buy both colors last night off the net for $85.00 dollars. The took my payment then today they cancelled my order and refunded my money because of the stupid ... PACT ACT!

I'd like to get one new if possible but will take a lightly used one if need be?

I tried to get one off the net but I was a day late past the stupid PACT ACT (which is ridiculously) and they cancelled my order because they could not ship it to me! Grrrrrr!

I hope someone can help me out. Pretty please? I can show you my id if need be, I'm 49 years old I promise you.

Thanks

Happy Easter ECF,

Innokin wishes you and your loved one to be surrounded by love and hope.



Wish you filling your Easter basket with Joy and Sweet.
Innokin Sensis is always a good companion to cheer you up.

Best Regards,
Innokin Team

Before I take a trip to FastTech and take that chance was just wondering if anyone happens to have one of these clones collecting dust. I prefer the one that has the ledges on the clamps or the FL version as it's called. I'm a restricted direct lung vaper mostly. Will probably head to FastTech soon but thought I should try here so as not to have the nail biting wait just in case anyone purchased too many of them or something like that.

Hello again and welcome back for today's review of the Vinci Pod Kit by Voopoo. This newest addition in the Vinci line is a very simple and easy device, so simple that there isn't even a button on the device that you have to operate. The Vinci Pod uses a auto draw method to inhale and has airflow selection using a cover to tighten down the vape to a very tight MTL vape. I guess some people might be able to vape it in a very tight RDL mode but I feel this is a MTL pod system. Let's get to know the Vinci Pod a little bit prior to the review.




COLOR CHOICES





INCLUDED IN THE BOX





SPECIFICATIONS





800 mAH BUILT IN BATTERY





BATTERY STRENGTH LIGHT INDICATOR





GENE CHIP






SIX SAFETY PROTECTIONS





ADJUSTABLE AIRFLOW





TYPE-C CHARGE PORT AND CONSTANT 15 WATT OUTPUT





SIDE FILL POD





TINY AND ATTRACTIVE





FIRST IMPRESSIONS


Opening the box you are greeted with another box that the Vinci sits in on top of a form fitted cut out, inside that box is your type-c charge cord and user manual. The pod is already installed on the device and has a protective sticker on the contacts to prevent a accidental firing of the device. Voopoo only supplies 1 pod with this kit. Branding is done well with Vinci on one side with Gene barely visible below at the bottom and Voopoo on the other side .


The type-c charge port is located on the bottom of the device and in this case I really don't mind because the Vinci is a very thin device that tips over very easily if a table is bumped, corners are all rounded making it a very comfortable device to hold and operate.



The 2ml pod itself uses 3 small air inlet holes in the bottom center between 2 contacts, remember to pull off the protective sticker after filling the pod and letting it sit for 5 or ten minutes to saturate the coil inside the pod. The coil inside the pod is 0.8Ω.



The Vinci really has a nice auto draw to it and uses a slider to open or close the airflow selector, in the above picture the slider is just barely open. The picture below shows the slider fully open and as you can see this is more for MTL vaping.



This is not the only airflow inlet though, on the other side is a very tiny pinhole that is also a airflow inlet hole. The Vinci can be really tightened up for people that enjoy a very tight MTL vape, just using the pinhole with the slider closed is even tighter than a cigarette draw.


Inside the device where the pod clips in is where the auto draw control nozzle is, centered between the 2 contacts that connect to the pod. This is a very good auto draw system.




Unfortunately when the coils lifespan is over you can't just change the coil , you must change the entire pod. Side fill is the filling method with a very large fillport that is mess free.



On the side that has the Vinci name on it there is also Gene at the bottom, it's hard to see because it doesn't stand out until you vape the device, install the pod or are charging it, the Gene logo will light up. Voopoo uses a series of lights to tell you the percentage of battery strength that the device is at.

GREEN - 60-100%



BLUE - 20-60%



And when it turns red it's time to begin charging the device. The Vinci charges at 5v 1amp and takes about 1 hr and 20 min to fully charge. When charging the Gene indicator will light breathing on and off at whatever battery percentage it's at and turn a solid green when fully charged.

Using the Vinci has been so nice because the auto draw works as well as it does and the flavor is above average with this pod. Your not going to fog up a room but vapor production is fine, remember this is mainly a MTL device.

When you talk about simplicity the Vinci is it ( no buttons, on/off switch or even a display ) because none of them are needed with the Vinci's constant 15 watt output.

One thing that has improved while using is the airflow slider, when I first started using it the slider was tight making precise adjustments tough but once there all was good and the slider stayed where I put it. Airflow is smooth in any position with no whistle or funny sounds heard. I think that Voopoo did a great job with the Vinci Pod Kit and I will continue to use it.

PROS

* Lightweight

* Thin

* Very Good Flavor

* Great Auto Draw

* Clear Pod

* Smooth Airflow

* Type - C


CONS

* Airflow Selector ( Not Easy To Make Precise Adjustments )



I would like to thank Voopoo for providing the Vinci Pod Kit for the purpose of this review and I hope that this review helped anyone looking to purchase the Vinci Pod Kit. People in the tight MTL crowd are really going to like the Vinci Pod Kit. The Vinci is so minimalistic in design that there really isn't much to cover except how well it works.

THANK YOU
BIGBOB2322

So originally I was way too confused to even attempt to get one of these clones. And then one showed up on the classified and I missed out on it through my own fault and now I'm interested again. From what I see on FastTech there between $10 and $20 and while of course I would prefer that it actually get here It's not the end of the world if it doesn't at that price point. But I don't have the first clue on how to decipher what's what in the world of those things. I don't like really restricted mtl I like more of a restricted direct lung and options going both tighter and looser than that would be fabulous. If anyone who really likes those things and has tried a few of them could help me figure out which one's appropriate that would be great.a glass tank would be fabulous but the lemonade e-juice that is my all-day vape has never cracked a plastic tank and I use it with them all the time. The one with the little ledges the facelift version looks really nice I like that deck the best but I only see that with the mouth too long I think and then you can't get the top tank I'm just all around completely flummoxed

Hello ECF,

How are you folks today?

Innokin is celebrating 10 years of innovation by planting trees in the Amazon rainforest in hopes of encouraging others to help the environment.



Innokin has partnered with One Tree Planted, an environmental charity on a mission to make it simple for anyone to help the environment by planting trees.

Innokin will be planting 3650 trees in the Amazon rainforest to celebrate its tenth anniversary. One tree for every day Innokin has been a vaping company. We want to encourage people worldwide to take part in this initiative, together we can make this world better for future generations.

For more information, please visit our official website:
Innokin Partners With One Tree Planted: One Day, One Tree

Thank you.

Best Regards,
Innokin Team