Freemax has launched many good vape starter kits with different wattage so far, including pod system, pod mod, vape pens and box mod starter kits, so which wattage of Freemax kits can meet your needs?



Here are four kinds of best vape kits for options, so which one do you like best? Which one is always you are looking for?

A. Freemax Twister 30W Kit =Twister 30W Tube Mod + Fireluke 22 Tank Metal Edition
B. Freemax Maxus 50W Kit = Maxus 50W Box Mod + Fireluke 22 Tank Resin Edition
C. Freemax Maxus 100W Metal Edition = Maxus 100W Box Mod + Fireluke 3 Tank Metal Edition
D. Freemax Maxus 200W Metal Edition = Maxus 200W Box Mod + M Pro 2 Tank Metal Edition

As we all know, Pod Cartridge is a consumable, and timely replacement of Pod Cartridge allows you to enjoy the purest flavor. Have you tried SMOK Nord X Kit? Are you looking for SMOK Nord X Replacement Empty Pod Cartridge?

If you are looking for SMOK Nord X Pod Cartridge, then grab it on vapesourcing.uk, the discount price is only ￡4.70.



Features

Two kinds of Pod, compatible with RPM 2/RPM series coils
Side Fill System-Silicone Stoppered
6ml Large Capacity Pod
E-Juice Viewing Window
Bottom Press-Fit Coil Installation
Magnetic Pod Connection
Ergonomic Mouthpiece

SPECIFICATION

Pod Type:
Nord X RPM 2 Pod-Compatible With RPM 2 Series Coils
Nord X RPM Pod-Compatible With RPM Series Coils
E-liquid Capacity: 6ml
Filling: Side Filling
Fit for: SMOK Nord X Kit
Quantity: 3pcs/pack

SMOK Nord X RPM Pod Cartridge and SMOK Nord X RPM 2 Pod Cartridge come in a pack of 3 and are designed exclusively for the SMOK Nord X Kit. Smok Nord X Pod Cartridge featuring a 6mL capacity, bottom press fit coil installation, and offers compatibility with SMOK RPM & RPM 2 Coils. The RPM 2 coils allow for thick clouds and full-bodied flavors on DL vaping, while the RPM series coils restore the best flavors on MTL vaping.

Quick link: SMOK Nord X Replacement Empty Pod Cartridge 6ml (3pcs/pack)

Guess you like: SMOK Nord X

How much do you know about SMOK TFV18 Replacement Meshed Coils?Today ,we are talking about the Replacement Meshed Coils for SMOK TFV18.It must be your expectations when you learn more anout it .

The Mesh Coils for Smok UK TFV18 Tanks, 0.33ohm Single Mesh Coils, 0.15ohm Dual Mesh Coils and RBA available. the Mesh Coils with single or dual mesh wire inside, which will enlarge the contact area with the e-juice, will heat the juice fastly and evenly, the Single Mesh Coil with the tightly contact with the cotton inside, will bring the mellow flavor, best rated at 100W to 110W. the Dual Mesh Coil for optimized taste, accelerating heating for the dense vapor, best rated at 100W to 110W. the RBA core will provide the DIY fun, supports dual coil building.Please go to vapesourcing.uk to buy .

SPECIFICATION
Coil Type:0.33ohm TFV18 Meshed Coil, rated for 80-140W (Best at 100-110W)
0.15ohm TFV18 Dual Meshed Coil, rated for 80-140W (Best at 100-110W)
Compatibility:SMOK TFV18 Tank
Quantity:3pcs/pack

Quick link: SMOK TFV18 Replacement Meshed Coils (3pcs/pack)

Afternoon everyone or morning/night
Just a quick question Is black/brown spots in mucus and in snot normal 1 month later after not smoking? I get overly worried about these type of things just want to make sure its nothing out of the ordinary.

Hope everyone is having a good day!

Selling one of my & Gen. Betterhalf's SXmini SL's. We had 6 total and with other Acquisitions over the past year the Stands are overflowing...
This is the "Coffee Tang" version and there is nothing, nada, zero wrong with it and it operates and performs just like it did when new. Other than setting the 5 Pre-Sets it is totally OEM Stock with no modifications to its OS. Never Charged the Batts internally-Always outside the Mod on a Charger.
Bought New from either VariTube or Element Vape (I don't remember which on this one).
Will come as pictured; Mod, 18650 Batt Adapter, and the YiHi Manual. No Box or Data/Charging/Update Cable (who needs the Box and everybody has too many Cables layin around as it is).
**It will come with an Extra: the Samsung 40T 21700 Battery that's in it IS INCLUDED in this Sale.

These are going for @ $140 everywhere I looked this morning (@ 5 diff Vendors) and the Batts are @ $11-$14 new.
So, I figure a below Market-Value Quick-Sale/NO Haggle Price at $68 includes USPS Priority Shipping to the lower U.S. 48.
Payment via PayPal Only.
*No Trades needed or considered except This and some Cash for an Authentic Taifun GX RDTA 4ml or GT IV non-TPD version. Otherwise nothing else please.

Check my Feedback to be confident & assured in Gear & Descriptions.

Thanks much for looking & considering

Damn Vape DOOM X Mesh RTA is an upgraded version of DOOM RTA. It retains the unique features of its predecessor and adds huge capacity and a juice flow control system. It is a 26mm diameter mesh rebuildable tank that provides anti-dry-hits and leak-proof, for all Mesh enthusiasts, from beginners to veterans. The perfect combination of mesh coil and RBA tank. According to the installed tank tube, the volume of DOOM X Mesh RTA will be different: 2ml/5.5ml/8ml. The enclosed bubble glass tube can be used to achieve a huge capacity of 8mL. Refills on the DOOM X Mesh RTA can be facilitated by the threaded top fill system mounted at the top, unscrewing the top to reveal a set of two bean-shaped fill ports. When filling your Doom X, make it upside down first to let the juice underneath flow out, then closed the juice flow ring and refill your tank. In addition, the juice flow control glass offers an adjustable feature to control the amount of juice going to the cotton wicks within.





Features:
1. Anti dry-hits and leak proof
2. Spring-loaded clamp-style build deck and 3D liquid flow
3. Simple wicking & building
4. Compact vaporizing chamber
5. Juice flow control system
6. 5.5ml/8ml e-juice capacity
7. Adopts mesh coil & normal coil
...

Click here for more:

Doom X Mesh RTA: Damn Vape Doom X Mesh RTA 8ml | Healthcabin

Doom X Mesh Tube: Damn Vape Doom X Mesh Replacement Glass Tube

Doom X Mesh Coil: Damn Vape Doom X Mesh Replacement Coil

The mod accepts 21700/18650 battery and the max wattage output increased to 100W, which means a lot for vapers who use subohm tanks or rebuildable atomizers.

And now it adopts standard 510 thread to match with all kinds of tanks or atomizers, including the new TPP tank and PnP pods which are used on the original Drag X. So the new Drag X Plus mod will be a good choice for vapers who needs a single battery mod.

Another new design is the TPP tank. The new TPP tank is a combination of a TPP pod and a 510 thread base. You can use the TPP pod on Drag X, Drag S, Drag Max and Argus Pro, Argus X, with the 510 thread base you can use your PnP pods on Drag X Plus and Drag 3.

Overall, the new Drag X Plus offers more options for vapers to choose the tanks and a wider range of wattage output!

Will you try the new VOOPOO Drag X Plus kit? Share us your thoughts in comments below.

First there were pods, then there were mods …

Now, there are Pod Mods!

We take a look at 5 of the best for 2021...

Hi,
I know there is a huge fanbase of vaping in australia, simply put because im one of them!
Nice to meet you all
Im glad there is a community here

I am currently using EVOD vv 1300mAh battery (and have many more to use up) with a mix of Kanger Evod Clearomizers and cheap ce4 clearomizers. The EVOD clearomizers get very warm (hot) after only 3 or 4 draws on the lowest setting. I am using 2.5 ohms coils and even on the lowest setting of 3.2v they get hot quickly. The card that comes with them recommends 3.9-4.2V for the 2.5 ohms coils.
Meanwhile I can use the cheap clearomizers up to 4.0v before they even get slightly warm and then only if I chain vape.
These are the ones getting overheated
Kanger eVod Clearomizer

Any idea why they are getting so hot so quickly?

What is the best way to start a new day, by only vaping, if addicted to the ciggys too much.

I have lack of will power. But want to rekindle my love of vaping. As done 42 days about 5 years ago.

I bought this aspire model about 4-5 weeks ago but only today did it stop working. When I plug it in, there is no problem and it shows on the screen that it is charged to 99% but as soon as I try to turn it on a take a hit, it doesnt turn on. Anyone have this model and know what to do?

I ordered one of these to try... I will try using round wire in the rebuildable coil!!!
Optima Pod Mod

Hello

i havent change my cotton in about 2 months and i vape quite often does the old cottons affects too much my health?

Been using drag x before but i got the drag Max now but i can barely go over 40 watt on it without coughing...i usually vape at 80 watt on my drag x without any problems. The coil says 60-80 watt recommended. Im using a new juice now btw. Is that juice supposted to be vaped at lower watt?

Recently bought some white silicone sleeves for a mod because all that was left to by anywhere. Not a big fan of white pr translucent silicone sleeves because when they get stained it's impossible to clean them, not even bleach works.

I figured I could try dying them.

Anyone do this successfully before?

I've read about it on a few sites. One method is to use hair dye, but I figured I would ask here in case maybe someone has done it using a better method.

I also have a bottle of black RIT fabric dye, but I don't know if that would work well.

Just don't want it to rub off on my hands or clothes.

I received artemis rta from sourcemore for the purpose of this review.

Colors:

- Black
- Silver






Specifications:

Diameter: 22mm
Material: Staninless Steel 304
Juice Capacity: 2.4ml
Airflow Ring Holes: 0.8mm/1.2mm/1.6mm/2.0mm/2.7mm
Air Pin Holes: 1.0mm/1.4mm/1.8mm/2.0mm(2.7mm without air pin)
Coil Type: Single Coil



In the box:

- Cthulhu Artemis RTA
- User Manual
- Spare Parts
- Extra drip tip







Artemis rta comes in really nice package, in the package you will get airflow pins, two drip tips and spare tank. This atomizer is 22mm in diameter and capacity of the atomizer is 2.4ml. Build quality of the atomizer is very good. On the atomizer you can see some details on the top cap and airflow control ring.

Atomizer comes with 510 drip tip preinstalled and people that like long drip tips will like this one. The other drip tip that comes with this atomizer is better in my opinion and it is really comfortable for using. In case that you don't like drip tips from the package you can use any other 510 drip tip on this atomizer.
This is a top fill atomizer, on the top cap you can see some details so you can easier unscrew the top cap and when you take off the top cap you can see two fill holes. YOu can fill this atomizer really fast and easy.










Atomizer comes with regular glass tank and capacity of the tank is 2.4ml. In the pacakge you will receive spare tank.





On the base you can see the airflow control ring and on the ring you can see airflow holes. On the airflow control ring you can see 5 different holes, 0.8mm, 1.2mm, 1.6mm, 2.0mm i 2.7mm. Under the airflow control ring you can see one airflow slot. You can take off the airflow control ring which is nice.
On the base you can see two screws for coil leads, screws are good, also you can see here airflow hole under the coil and two wicking slots.
On the base you can also see reverse threading and when you unscrew the base you can replace the airflow pin under the coil. With this atomizer you will receive 4 different airflow pins, 1.0mm, 1.4mm, 1.8mm i 2.0mm. You can really easy replace the pin and you don't have to take out your coil which is really nice. You can build and wick this atomizer really fast and easy.













My thoughts:



Build quality of the atomizer is very good. Package is also good because in the package you will receive two drip tips, two tanks and airflow pins. Drip tip that comes in the package is comfortable for using and drip tip that comes preinstalled is for people that want long drip tips. This is a top fill atomizer and you can fill the tank fast and without any problems. Capacity of the tank is 2.5ml which is good for mtl atomizer. Building and wicking here is simple. With this atomizer you will receive airflow pins so you can change the airflow under the coil which is really good. You can really easy put any pin inside and you don't have to take off your coil or cotton which is really great. On the base we have reversed threading which can be small con because sometimes when you are screwing atomizer on the mod you can easily unscrew the base but anyway i will not take it as a con because solution is good and you don't have to take off your coil when you want to change the pin. Also this atomizer has a bit false airflow, would be nice that airflow ring is a bit tighter. Flavor on this atomizer is really good, I really like flavor here. In my opinion this atomizer is good atomizer, especially if you want good flavor and simple atomizer.

Cons:

- Would be nice that airflow ring seals better




Pros:

- Good build quality
- Two drip tips
- I really like drip tip from the package
- Airflow pins
- Easy to change pins
- You don't have to take off coil or cotton to replace the pin
- Easy to build and wick
- Very good flavor
- Easy to fill
- Simple for using


Thanks sourcemore
You can buy this device here for $26.29
Code: ARTE
Cthulhu artemis

I received grus from sourcemore for the purpose of this review.

Lost vape grus colors:

- SS/Carbon Fiber
- Gunmetal/Carbon Fiber
- Black/Carbon Fiber
SS/Zebra Wood
- Gunmetal/Walnut Wood
- Black/Walnut Wood
- SS/Jungle
- Gunmetal/Puzzling
- Black/Marine








Specifications:

- Dimension: 94.6*40.5*30.5mm
- Battery: Single 21700/20700/18650 battery (not included)
- Power Range: 5-100W
- Temperature Range: 200℉-600℉/100℃-300℃
- Screen: 0.96 inch color TFT display screen
- Body Material: Zinc Alloy
- Coil Resistance Supported Range: 0.1ohm-5.0ohm



In the box:

- Grus 100 Mod
- Type-C USB Cable
- 18650 Battery Adaptor
- Warranty Card
- User Manual




Grus mod is powered by one battery and this mod is compatible with 18650, 20700 and 21700 batteries which is really good. I really like design of this mod and build quality of the mod is really good. Mod is very comfortable for using, it is rounded and it feels really nice in the hand. Mod works from 5-100w.





From the top side of the mod you can see the connection and I really like that connection, threads here are good and we have here spring loaded 510 pin. On this mod you can use atomizers up to 30mm in diameter which is very good.
From the bottom of the mod you can see the battery cap that you need to unscrew. Threads here are very good and you can easy take off the cap. This mod is compatible with 18650, 20700 and 21700 batteries which is really nice. In the package you will receive adapter for 18650 battery.
On one side of the mod you can see the fire button, screen, buttons and usb port. This mod has usb c port which is really good. The fire button and buttons are good and I didn't have any problems. The fire button is clicky and comfortable for using. We have here color screen and brightness of the screen is good so you can see everything nice on the screen.











You can turn on and turn off this device when you click 5 times on the fire button. When you turn on the device on the screen you will see:

- Battery indicator
- Ohm
- Power
- Time
- Puff
- Color of the screen

When you click on the button in the middle you can choose the working mode:

- Power
- Voltage
- Ni
- Ti
- Ss

To change the color of the screen you need to hold the button in the middle, it is really nice option.





My thoughts:

Build quality of the mod is really good, also I really like the design of the mod. Connection is really good and I didn't have any problems here. It is really nice that this mod supports 30mm atomizers without overhang.
THe battery cap has really nice threading and it is easy to replace the battery. I use here 21700 battery. The fire button and buttons are good and so far I didn't have any problems. Mod is really nice shaped and it is very comfortable for using. We have color screen here and brightness of the screen is good, you can see everything on the screen without problems and also you can change the color of the screen.
This mod has usb c which is really nice. This mod is also very simple for using, we have few working modes that you can easily change and we have different screen colors which I like. On the screen you can see everything that you need. Mod works very good so far, I use it every day and so far I didn't have any problems, I really like it. In my opinion this is one really good device and I would suggest you this mod.


Cons:

- None


Pros:

- Good build quality
- Really nice design
- Comfortable for using
- Atomizers up to 30mm in diameter
- Color screen
- Good buttons
- The fire buton is good and responsive
- 18650, 20700 and 21700 battery
- Easy for using


Thanks sourcemore
You can buy this device here:
Code: LVG to get it for $26.99
Grus mod

I have a Fireluke 3 tank, and I love it. But I've been wanting to play with temp control on my device (Vaperesso Revenger X). I have tried several times using the SS TCR for 904L stainless, tweaking the tcr up and down, tweaking the max wattage, but cannot get anything like a real TC flow.

So, my question, is there a Kanthal or Titanium coil for the Fireluke 3 tank? Is that even a fair question? Should I just try a different tank? Is my device the problem?

Lots of questions. But anyone's opinions or assistance would be appreciated.

Thanks!
--Glenn.

The eLeaf iStick 80 is on its second release after its initial release with a slightly different shape back in 2019. This iteration of the iSitck 80 (now with a T!) comes with a release of one of eLeafs more popular pod tank systems.


═╣ eLeaf iStick T80 ╠═

00:00 ◄ Intro and specs
01:57 ◄ Close up
08:03 ◄ Temp Control & Wattage Vape
10:25 ◄ Thoughts


Login to view embedded media

Geekvape Wenax K1 Mtl Kit...There's no two without three!
Geekvape after introducing Wenax Stylus and Wenax C1 releases the third version of this line, the Wenax K1. The new device is a 600mAh MTL “entry level” kit with double mechanical / automatic suction.
I think that in this range of products Wenax K1 stands out from the crowd, I really liked the functionality of the single control button and the aromatic performance of its disposable cartridges.
Enjoy the reading



Geek Vape Wenax K1 arrives in an elegant and inconspicuous white package. "Geek Knows Better" is the motto that appears on the side, while from the front you can see a light decorative texture very fine and almost invisible, the mark of geek Vape is present at the bottom right.

On the back of the box are listed; the packing list, addresses, warnings, logos & brands.





Packing List:
1x Geekvape Wenax K1 device
1x Geekvape Wenax K1 cartridge from 0,8Ω range 12-16W (Pre-installed)
1x Geekvape Wenax K1 1.2Ω cartridge range 10-12W (Spare)
1x USB cable (type C)
1x User Manual



Technical data and features:
Materials: Aluminum Alloy and PCTG
Dimensions: 21.6 × 114.6mm
Weight: 30g
Output power: 9-16W
Power output adjustable on 3 levels
Puff: Automatic (Cut-off 10s)
Puff: Manual (Cut-off 10s)
Coil Range: 0.4-3Ω
Battery capacity: 600mAh
Charging Specifications: 5V USB-C charging port
Low voltage warning: 3.2 + - 0.1V
PCBA temperature alarm: 80 ° C
Safety lock of the fire button.
Working temperature: -10 ~ 45 ° C
Stand-by current: <= 15uA
Pod capacity: 2.0ml



Available colours:



First impressions:

I received the blue sample, I must say that the rest of the color range is also pleasant in its monochromatic simplicity, the dimensions of this kit are naturally very small, you can store it in any pocket and you can easily forget you are wearing it.
The finishes of Venax are good as well as the tactile feedback, the back bears the writing "Wenax" very light and not visible against the light.



The classic K1 factor form is reminiscent of many devices in this category, such as the Vaporesso Xros.
I was a little surprised that the battery capacity is only 600mAh, I would have hoped for a bit more capacity as the Venax is almost as tall as Xros.



Control key:
The front side contains the circular control button slightly protruding and concave in the center, this is the only button on the Veenax and has several interesting functions, you can use it for vaping but you can also lock it (anti-touch function) using only the automatic puff , and then store the device in your pockets and without any danger of it being activated inadvertently.
- Power on / off: 5 clicks on the button
- Anti-touch function: To lock / unlock the key you need to make further 5 clicks on the key.