I received artemis rta from sourcemore for the purpose of this review.

Colors:

- Black
- Silver






Specifications:

Diameter: 22mm
Material: Staninless Steel 304
Juice Capacity: 2.4ml
Airflow Ring Holes: 0.8mm/1.2mm/1.6mm/2.0mm/2.7mm
Air Pin Holes: 1.0mm/1.4mm/1.8mm/2.0mm(2.7mm without air pin)
Coil Type: Single Coil



In the box:

- Cthulhu Artemis RTA
- User Manual
- Spare Parts
- Extra drip tip







Artemis rta comes in really nice package, in the package you will get airflow pins, two drip tips and spare tank. This atomizer is 22mm in diameter and capacity of the atomizer is 2.4ml. Build quality of the atomizer is very good. On the atomizer you can see some details on the top cap and airflow control ring.

Atomizer comes with 510 drip tip preinstalled and people that like long drip tips will like this one. The other drip tip that comes with this atomizer is better in my opinion and it is really comfortable for using. In case that you don't like drip tips from the package you can use any other 510 drip tip on this atomizer.
This is a top fill atomizer, on the top cap you can see some details so you can easier unscrew the top cap and when you take off the top cap you can see two fill holes. YOu can fill this atomizer really fast and easy.










Atomizer comes with regular glass tank and capacity of the tank is 2.4ml. In the pacakge you will receive spare tank.





On the base you can see the airflow control ring and on the ring you can see airflow holes. On the airflow control ring you can see 5 different holes, 0.8mm, 1.2mm, 1.6mm, 2.0mm i 2.7mm. Under the airflow control ring you can see one airflow slot. You can take off the airflow control ring which is nice.
On the base you can see two screws for coil leads, screws are good, also you can see here airflow hole under the coil and two wicking slots.
On the base you can also see reverse threading and when you unscrew the base you can replace the airflow pin under the coil. With this atomizer you will receive 4 different airflow pins, 1.0mm, 1.4mm, 1.8mm i 2.0mm. You can really easy replace the pin and you don't have to take out your coil which is really nice. You can build and wick this atomizer really fast and easy.













My thoughts:



Build quality of the atomizer is very good. Package is also good because in the package you will receive two drip tips, two tanks and airflow pins. Drip tip that comes in the package is comfortable for using and drip tip that comes preinstalled is for people that want long drip tips. This is a top fill atomizer and you can fill the tank fast and without any problems. Capacity of the tank is 2.5ml which is good for mtl atomizer. Building and wicking here is simple. With this atomizer you will receive airflow pins so you can change the airflow under the coil which is really good. You can really easy put any pin inside and you don't have to take off your coil or cotton which is really great. On the base we have reversed threading which can be small con because sometimes when you are screwing atomizer on the mod you can easily unscrew the base but anyway i will not take it as a con because solution is good and you don't have to take off your coil when you want to change the pin. Also this atomizer has a bit false airflow, would be nice that airflow ring is a bit tighter. Flavor on this atomizer is really good, I really like flavor here. In my opinion this atomizer is good atomizer, especially if you want good flavor and simple atomizer.

Cons:

- Would be nice that airflow ring seals better




Pros:

- Good build quality
- Two drip tips
- I really like drip tip from the package
- Airflow pins
- Easy to change pins
- You don't have to take off coil or cotton to replace the pin
- Easy to build and wick
- Very good flavor
- Easy to fill
- Simple for using


Thanks sourcemore
You can buy this device here for $26.29
Code: ARTE
Cthulhu artemis

I received grus from sourcemore for the purpose of this review.

Lost vape grus colors:

- SS/Carbon Fiber
- Gunmetal/Carbon Fiber
- Black/Carbon Fiber
SS/Zebra Wood
- Gunmetal/Walnut Wood
- Black/Walnut Wood
- SS/Jungle
- Gunmetal/Puzzling
- Black/Marine








Specifications:

- Dimension: 94.6*40.5*30.5mm
- Battery: Single 21700/20700/18650 battery (not included)
- Power Range: 5-100W
- Temperature Range: 200℉-600℉/100℃-300℃
- Screen: 0.96 inch color TFT display screen
- Body Material: Zinc Alloy
- Coil Resistance Supported Range: 0.1ohm-5.0ohm



In the box:

- Grus 100 Mod
- Type-C USB Cable
- 18650 Battery Adaptor
- Warranty Card
- User Manual




Grus mod is powered by one battery and this mod is compatible with 18650, 20700 and 21700 batteries which is really good. I really like design of this mod and build quality of the mod is really good. Mod is very comfortable for using, it is rounded and it feels really nice in the hand. Mod works from 5-100w.





From the top side of the mod you can see the connection and I really like that connection, threads here are good and we have here spring loaded 510 pin. On this mod you can use atomizers up to 30mm in diameter which is very good.
From the bottom of the mod you can see the battery cap that you need to unscrew. Threads here are very good and you can easy take off the cap. This mod is compatible with 18650, 20700 and 21700 batteries which is really nice. In the package you will receive adapter for 18650 battery.
On one side of the mod you can see the fire button, screen, buttons and usb port. This mod has usb c port which is really good. The fire button and buttons are good and I didn't have any problems. The fire button is clicky and comfortable for using. We have here color screen and brightness of the screen is good so you can see everything nice on the screen.











You can turn on and turn off this device when you click 5 times on the fire button. When you turn on the device on the screen you will see:

- Battery indicator
- Ohm
- Power
- Time
- Puff
- Color of the screen

When you click on the button in the middle you can choose the working mode:

- Power
- Voltage
- Ni
- Ti
- Ss

To change the color of the screen you need to hold the button in the middle, it is really nice option.





My thoughts:

Build quality of the mod is really good, also I really like the design of the mod. Connection is really good and I didn't have any problems here. It is really nice that this mod supports 30mm atomizers without overhang.
THe battery cap has really nice threading and it is easy to replace the battery. I use here 21700 battery. The fire button and buttons are good and so far I didn't have any problems. Mod is really nice shaped and it is very comfortable for using. We have color screen here and brightness of the screen is good, you can see everything on the screen without problems and also you can change the color of the screen.
This mod has usb c which is really nice. This mod is also very simple for using, we have few working modes that you can easily change and we have different screen colors which I like. On the screen you can see everything that you need. Mod works very good so far, I use it every day and so far I didn't have any problems, I really like it. In my opinion this is one really good device and I would suggest you this mod.


Cons:

- None


Pros:

- Good build quality
- Really nice design
- Comfortable for using
- Atomizers up to 30mm in diameter
- Color screen
- Good buttons
- The fire buton is good and responsive
- 18650, 20700 and 21700 battery
- Easy for using


Thanks sourcemore
You can buy this device here:
Code: LVG to get it for $26.99
Grus mod

I have a Fireluke 3 tank, and I love it. But I've been wanting to play with temp control on my device (Vaperesso Revenger X). I have tried several times using the SS TCR for 904L stainless, tweaking the tcr up and down, tweaking the max wattage, but cannot get anything like a real TC flow.

So, my question, is there a Kanthal or Titanium coil for the Fireluke 3 tank? Is that even a fair question? Should I just try a different tank? Is my device the problem?

Lots of questions. But anyone's opinions or assistance would be appreciated.

Thanks!
--Glenn.

The eLeaf iStick 80 is on its second release after its initial release with a slightly different shape back in 2019. This iteration of the iSitck 80 (now with a T!) comes with a release of one of eLeafs more popular pod tank systems.


═╣ eLeaf iStick T80 ╠═

00:00 ◄ Intro and specs
01:57 ◄ Close up
08:03 ◄ Temp Control & Wattage Vape
10:25 ◄ Thoughts


Login to view embedded media

Geekvape Wenax K1 Mtl Kit...There's no two without three!
Geekvape after introducing Wenax Stylus and Wenax C1 releases the third version of this line, the Wenax K1. The new device is a 600mAh MTL “entry level” kit with double mechanical / automatic suction.
I think that in this range of products Wenax K1 stands out from the crowd, I really liked the functionality of the single control button and the aromatic performance of its disposable cartridges.
Enjoy the reading



Geek Vape Wenax K1 arrives in an elegant and inconspicuous white package. "Geek Knows Better" is the motto that appears on the side, while from the front you can see a light decorative texture very fine and almost invisible, the mark of geek Vape is present at the bottom right.

On the back of the box are listed; the packing list, addresses, warnings, logos & brands.





Packing List:
1x Geekvape Wenax K1 device
1x Geekvape Wenax K1 cartridge from 0,8Ω range 12-16W (Pre-installed)
1x Geekvape Wenax K1 1.2Ω cartridge range 10-12W (Spare)
1x USB cable (type C)
1x User Manual



Technical data and features:
Materials: Aluminum Alloy and PCTG
Dimensions: 21.6 × 114.6mm
Weight: 30g
Output power: 9-16W
Power output adjustable on 3 levels
Puff: Automatic (Cut-off 10s)
Puff: Manual (Cut-off 10s)
Coil Range: 0.4-3Ω
Battery capacity: 600mAh
Charging Specifications: 5V USB-C charging port
Low voltage warning: 3.2 + - 0.1V
PCBA temperature alarm: 80 ° C
Safety lock of the fire button.
Working temperature: -10 ~ 45 ° C
Stand-by current: <= 15uA
Pod capacity: 2.0ml



Available colours:



First impressions:

I received the blue sample, I must say that the rest of the color range is also pleasant in its monochromatic simplicity, the dimensions of this kit are naturally very small, you can store it in any pocket and you can easily forget you are wearing it.
The finishes of Venax are good as well as the tactile feedback, the back bears the writing "Wenax" very light and not visible against the light.



The classic K1 factor form is reminiscent of many devices in this category, such as the Vaporesso Xros.
I was a little surprised that the battery capacity is only 600mAh, I would have hoped for a bit more capacity as the Venax is almost as tall as Xros.



Control key:
The front side contains the circular control button slightly protruding and concave in the center, this is the only button on the Veenax and has several interesting functions, you can use it for vaping but you can also lock it (anti-touch function) using only the automatic puff , and then store the device in your pockets and without any danger of it being activated inadvertently.
- Power on / off: 5 clicks on the button
- Anti-touch function: To lock / unlock the key you need to make further 5 clicks on the key.

Hi. Let me introduce myself, my name is Sandrine. I am from France, city of Toulouse. Apparently like everyone here, I signed up to trade and share with members of the forum. I realize that I waited a long time to register in your forum because I have a smoking addiction problem, but hey here I am! PS: I don't really know how to start a discussion but I will try anyway! Thank you for your welcome.

I have a recurve dual rda that I was previously trying to trade for the single coil version but I think that was a little bit too restrictive. It is rainbow in color and I will post pictures below.

Looking for $23 shipped conus paypal
But would consider a trade particularly for single coil rebuildables especially the recurve solo but not only the recurve solo.

*I would have just edited the other post but it was too late for me to edit.That's why there's going to be two posts for one product. I have asked admin to formally close that one when they get a chance. I don't have two of them this is the same as that but I didn't know what else to do since I couldn't edit it and it was getting no attention

I have a recurve dual rda that I was previously trying to trade for the single coil version but I think that was a little bit too restrictive. It is rainbow in color and I will post pictures below.

Looking for $23 shipped conus paypal
But would consider a trade particularly for single coil rebuildables especially the recurve solo but not only the recurve solo.

I can remove the build or leave it your choice. It comes with everything except the coils in the baggie I'm not sure if those are what's in the atomizer or not I just know they're not there anymore. Happy to take more pictures if necessary

*I would have just edited the other post but it was too late for me to edit.That's why there's going to be two posts for one product. I have asked admin to formally close that one when they get a chance. I don't have two of them this is the same as that but I didn't know what else to do since I couldn't edit it and it was getting no attention

Good morning everyone buying this vape today, thoughts?
SMOK R-Kiss 200W Kit and TFV-Mini V2 2mL Tank
coils are rated at 110-130watts

So basically, i just changed coils on my rda, then when I was dry hitting it (60w). An electric blue spark was coming from the corner bottom (every time i was hitting the button, shown on pictures)

I have 5 brunhilde mtl and 2 of them are perfect.
1 has the issue that you have to turn them Really hard from vaping hole to fill hole. The 2 others I can hardly get them to turn at all, and can hardly get the cap off.
I used the ultrasonic cleaner but it doesnt help at all.

Is there anything i can do to get these 3 to work as they suppose to ???

So, I want to try out these new disposable vape things. They seem to be catching on like wild fire. I mean I guess the prices have come down a lot. I see you can get these things for the cost of a pod coil replacement.

Do you vape on a Disposable? If so which one is your favorite? Please send along some recommendations.

Package deal Squape N and Dvarw FL MTL $180 fees on buyer

Squape N Duro DL w/box, spares, 2 and 4ml chimneys

Dvarw FL MTL 22mm w/box, spares, 2mm and 2x1.5mm airflow inserts, 5ml glass tank

I've just dropped all my juice and i'm going to get a pack of cigs aint a good day
I hate how hard they make it to get the cap off to add nicotine shots

Hello everyone I've been vaping since I quit cigarettes 8 yr ago. Early on I settled on box mods and pre made coils. Kangertech and Clouper mods and kangertech .5ohm ooc coils which I still use today and will be stocking up. Always bought my vaping products online. Now with the new not being able to ship I will have to DIY my ejuice. Have syringes and scale. Stocking up on Nicotine. I think I will still be able to get flavors with the shipping ban.

Since have gone plumb "Heels over Head" completely Insane for SbS Mods, I am going to glean & RIF another rare (and highly neglected) "Chairside Queen" from the Ft. Vape Armory to help fund the next SbS Mod Acquisition...

Bought this directly from Asmodus in Feb of 2020 along with the matching SS Blank BF RDA. It was Mineral Oiled & Connesurier Waxed 3 times within the 1st week of its arrival and once since. NEVER taken out of the House and vaped sparingly. Matter of fact, just put a new Build in it for the first time since the 1st just 2 weeks ago.
This truly is one absolutely STUNNING Stabilized Wood Mod with very little Resin Block filler. The differing Dye-Coloring & Grains are phenominal. You see this alot BUT HONESTLY; The Pics Do NOT do this proper justice...
Ima definitely regret parting with this one some day REALLLL BADDD (won't be the 1st time or the last I'm sure) but Themz tha Breaks for being such the Gear-Compulsive EsOhBee that I is.... My Defects = Your Benefit
The Drip Tip was custom ordered from CoilClout for another Green Stab Wood I have but liked it on the Pumper for both its Looks and the way it hit (Flavor & Vape-Mass) so left it on and will include it in this Sale. Batt NOT included.
Comes with both OEM Boxes and Blank has all Spares & both Allen Keys it came with (as pictured).

Absolutely ZERO issues or blemishes/marring other than usual marks of use internally of the Blank BF RDA.

These 1 of 1 Stab Wood Pumpers went for about $140-$150 if I remember correctly and the Blank BFRDA for about $40. You most Definiteley don't see or find these for sale and Asmodus has been sold out for a long time.
*Oh yeah, the custom Coil Clout DT is @ $27 shipped on top of that ..
Given all that: I'm gonna call this at $110 for all includes USPS Priority Shipping to the lower U.S. 48 Only please.

Payment via PayPal ONLY.

Check my Feedback to buy confidently & assured.

Thanks for looking & considering.

Hi,

So, I know what "Pass-through" is but what is "Pass-Through Protection"?

Ends Today (2/15) ..25% coupon code includes everything. Enter "valentines25" at checkout at ejuice.deals for your savings.

Selling my Dicodes Dani Box 21700 in Titan Grey Color. Love it & these/this is truly an AWESOME Mod and if weren't for new obsession with SbS Mods (funds from this being used toward purchase of a Dani SbS ) I wouldn't even consider parting with it. Period. NO Way...
Purchased new from Creme de Vape and used once weekly in normal Rig Rotation. No issues, glitches, or probs in the least. Has the typical light signs of usage on Bottom, Top (around 510), but as seen in pics light and not readily noticeable. Always mated to a Kayfun 5 squared and used only a Samsung 40T Batt and charged outside the Mod. Sincerely in great pre-owned Condition and perfect like-new Operation/Performance.
Going to include the 40T Batt and the OEM Dicodes Box and Wire as seen in Pic.

Check my Feedback to be confident and assured in my Gear, Descriptions, and quick shipping.

These sell new for between $315-$325 shipped U.S. Dollars and very very rarely come up for sale.
Given that: I consider $220 includes USPS Priority Shipping to be quite Fair and well within anyone's perceptions of true Market Value.

Sell and ship to Lower U.S. 48 Only and Payment via PayPal Only.

Thanks much for looking and considering. Questions Welcomed.

Looking to sell some juice. Let me know if your interested in any of these. All of the juice is only 1 week old, practically brand new!

60m: $8
100ml: $10
120ml: $12
PG/VG Diluent: $10

- The Hype (0mg 100ml) Blue Frost
- Glas Basix (3mg 60ml) Strawberry Blast
- Glas Basix (0mg 60ml) Blueberry Cake
- Rockt Punch (0mg 120ml) Melon Crusher
- Candy King (0mg, 100ml) Strawberry Watermelon
- Naked 100 (0mg, 60ml) Hawaiian POG
- Skwezed (0mg, 100ml) Green Apple
- Skwezed (0mg, 100ml) Peach
- Air Factory (3mg, 60ml) Blue Razz Ice
- Ruthless (0mg, 60ml) Swamp Thang
- Coastal Clouds (3mg 60ml) Citrus Peach
- Pachamama (0mg 60ml) Fuji Apple
- Shijin Gummy O’s (0mg 100ml) Peach Rings, Apple Rings, & Blue Razz Rings
- 1 Gallon of 70Vg/30Pg Diluent


All Shipments will be sent out within 24 hours after receiving payment, and a tracking number will be provided.

Please do not put any notes in the PayPal transaction or your payment will be refunded immediately.

- Shipping: CONUS
- Shipping Cost: ($4 First Class or $8 Priority)
- PayPal F+F (No Charge)
- PayPal G+S (Add 4%)
- CashApp: (Add 1.5%)

Check out items I’m looking to Buy:

Im interested in buying a couple of the items mentioned down below. For the RTA color I’m looking for Black or Gold. If you have one of these please DM me. Thanks!

MODS:
- Dovpo Odin Mini 75W DNA75C (Silver)
- Dovpo Odin Mini 100W (Matte Black or Chrome)

RTA:
- HellVape Destiny (Matte Silver)
- SvoëMesto Kayfun (5, 5 Squared, 52, 52 SE)
- Vaperz Cloud Trilogy 30mm
- QP Design GATA
- Augvape Druga (RTA)
- Steam Crave Aromamizer Supreme V3 Advanced


Sent from my iPhone using Tapatalk

Without a doubt it has been fun. But due to a mixture of health, cost and increased demand elsewhere. The Make 'N' Vape website will be coming to an end very very shortly. I would like to take this opportunity to say a big thank your to all the manufactures who submitted items for review. But a special big thank you to you the readers for taking the time to visit and read my articles. I wish you all the best and keep well.

Feel free to buy as much or as little as you’d like. I also have other stuff for sale not listed, just ask. The tanks will come with their accessories. All of the coils are brand new never used.

All items sold will be cleaned and disinfected before being shipped

- GeekVape Zeus (Gold) 10/10) $15
- GeekVape Zeus (Gold) 10/10) $15
- Innokin Zlide MTL/RDL (Black) 10/10 $10
- Innokin Z Coils (6 pcs, 0.8 ohms) $5
- Smok RPM40 (7/10) $5
- Smok RPM40 Pods (15 pieces) $1 Each
- Smok RPM40 Nord Pods (1 piece) $1 Each


All Shipments will be sent out within 24 hours after receiving payment, and a tracking number will be provided.

Please do not put any notes in the PayPal transaction or your payment will be refunded immediately.

- Shipping: CONUS
- Shipping Cost: ($4 First Class or $8 Priority)
- PayPal F+F (No Charge)
- PayPal G+S (Add 4%)
- CashApp: (Add 1.5%)


CHECK OUT ITEMS IM LOOKING TO BUY BELOW:

Im interested in buying a couple of the items mentioned down below. For the RTA’s color I’m interested in either Black, Silver, or Gold. If you have one of these please DM me.

MODS:
- Dovpo Odin Mini 75W DNA75C (Silver)
- Dovpo Odin Mini 100W (Matte Black or Chrome)

RTA:
- HellVape Destiny (Matte Silver)
- SvoëMesto Kayfun (5, 5 Squared, 52, 52 SE)
- Vaperz Cloud Trilogy 30mm
- QP Design GATA
- Augvape Druga (RTA)
- Steam Crave Aromamizer Supreme V3 Advanced



View attachment 930311