There is no setting for SS430 in the RX200 [Yet] although adjustable TCR must be due shortly as they released it on the VTC Mini
The preset is for SS316
WISMEC Reuleaux RX200 TC
- Thread starter USMCotaku
- Start date
- th_trl_thread_readers 0
- Status
There is no setting for SS430 in the RX200 [Yet] although adjustable TCR must be due shortly as they released it on the VTC Mini
The preset is for SS316
It's not...it even has a higher scorch point then cotton, so burnt wick happens less
Sent with one hand, the other is busy vaping.
Not exactly spot on...but 1° variance is as close to spot on as I've tested in a mod
Sent with one hand, the other is busy vaping.
I run my tests usually on a spaced (but very close, almost contact, coil and take the temp from inside the coil
My guess would be build differences....my vape is subjectively warm at 420 before even probing...very similar to my two adjustable tcr mods....and I know those are accurate.
Sent with one hand, the other is busy vaping.
430 for me runs hotter then set temp.....i was running it around 350-380
Sent with one hand, the other is busy vaping.
We DO know that it doesnt handle dual coil well, so this makes sense for that build
Sent with one hand, the other is busy vaping.
I think until there is a manual TCR adjustment there will be these variances. All I know is mine at 480 right now is giving me the same vape as the SX at 420. I use a single 5 wrap spaced 3mm 26awg coil using Unkamen Ti. I am very happy with it the way it is now that I know what I need to use the get the vape that I'm used to.
I'm getting a very smooth vape with plenty of vapor for me. I'm not a cloud chaser but thats not what Ti is used for. I only use 25w but thats all the Ti requires hits TP every couple secs but thats fine.
I probably should unlock my resitance and when it sits overnite would probably set in at .27 but .28 is fine with me all that would do is I would probably have to go to 490 or 500.
Well I wonder how those guys are doing that bricked their mods. Thats a real bummer. With the time diff it's like 3am tomorrow there. China I forget the city that they make all these ecigs.
im wondering to! I have one that's gonna show up any day now and i'm a bit reluctant to update it until we know what the heck is going on forsure
I haven't had any problem with mine but I haven't used the USB for charging. That seems to be what the problem is with the update. They both did that. I have changed batteries and everything is fine just don't charge with the USB port.
@Quantum Mech How does that VTC mini perform with the manual TCR. I see that Joyetech shows the value for Ti01 at .00300-.00400 quite a variation and if their chip is set to around .00300 SE puts it at .00366 that would definately make the difference.
Good plan!im wondering to! I have one that's gonna show up any day now and i'm a bit reluctant to update it until we know what the heck is going on forsure
Thanks to the folks on ECF posting about potential issues, I am avoiding any updates and not charging via USB until I am confident all bugs/issues have been fixed. I tend to stick with Kanthal builds and don't bother with TC often, so I am currently happy with my RX200 and love the vape I am getting between 30-80w.
So far it is a great mod. But I have only had I only had it a few days and haven't really done anything that might cause it to malfunction.
Very nice.
I am hoping to find some time today to build my Aromamizer but the holidays have been crazy since I picked it up earlier in the week.
What kind of build are you using?
I expect that variance is based on the purity of the wire they have available out there
Have used the Ti mode briefly but not the manual TCR yet which I would set at 0.00350 as that works for me on the M class with the crazy wire
Have used the Ti mode briefly but not the manual TCR yet which I would set at 0.00350 as that works for me on the M class with the crazy wire
I also see that they came out with a new mod that is 150w with the v3.0 FW so it comes with TCR adjustment. I also see they use the TCR at TCRx10 to the -1 power so Ti would be 366 on a Jtech board. I am sure if they can find a way to do it with this board they will do it. Otherwise instead of another of these I'll get the new Cuboid. Also for the guy that uses SS430 it would be 138.
- Status
Similar threads
