All new: The Precise Simplicity 14500 from Super-T Manufacturing Inc!

[benzinojamin]

I'm using Efest batteries so I took out one o-ring and put in the shorter post. Seemed to be a perfect fit, but I'm occasionally getting interruptions while firing. The switch fires on command--every time--but throughout the inhale, occasionally it appears I'm losing the connection. I took it apart, made sure there wasn't anything in the way, or something that shouldn't be there.

Any tips on this issue?

 

[oplholik]

I'm using Efest batteries so I took out one o-ring and put in the shorter post. Seemed to be a perfect fit, but I'm occasionally getting interruptions while firing. The switch fires on command--every time--but throughout the inhale, occasionally it appears I'm losing the connection. I took it apart, made sure there wasn't anything in the way, or something that shouldn't be there.

Any tips on this issue?

Are you using the button top, or the flat top efest?

 

[benzinojamin]

Button top

 

[oplholik]

Hmm, the button top is what I tried with the s/u you are using, and mine works fine. How many of these do you have? Batts will vary in length a little, so maybe this is one that is just a little on the short side. If you have more than one, can you measure them? If you can, use calipers with electrical tape on the jaws of the calipers, and try a longer one, if you have one that is longer. Hope this helps.

 

[oplholik]

Just thought I'd add, that I use AW IMR's in the Simplicity, of which I have quite a few. They all work with the s/u as sent from SuperT. I haven't measured them, but their lengths apparently are maybe more consistent than the efest.

 

[Tripster]

I absolutely love my Precise Simplicity...so much I ordered 8 AW IMR bats before they disappear again. I will be venturing back to using Long barrel 510 atties with my Simplicity, so happy.

 

[Jonner]

Anyone out there have a simplicity with an evod setup that they could post a pic of? Thinking of buying simplicity, have an evod, would like to see how it matches up? I'll post this in pics thread as well. Thanks in advance.

 

[9ball_AJ]

Anyone out there have a simplicity with an evod setup that they could post a pic of? Thinking of buying simplicity, have an evod, would like to see how it matches up? I'll post this in pics thread as well. Thanks in advance.

I detest having to use 510-ego adapters, but it looks pretty good, and vapes pretty good too!

 

[wongster360]

Simplicity and Cyclone with standard top cap



And with the ACV (Air Control Valve) top cap. I much prefer the ACV even though it's too wide at the base.

 

[Jonner]

I detest having to use 510-ego adapters, but it looks pretty good, and vapes pretty good too!

Thank you, I don't like using the adapters either, but that does look good!

 

[bikini_kill]

Simplicity and Cyclone with standard top cap

View attachment 227215

And with the ACV (Air Control Valve) top cap. I much prefer the ACV even though it's too wide at the base.

View attachment 227217

I've had my eye on the Cyclone for so long; I don't understand why I don't own one yet. Could you elaborate a little more about the differences between the top caps and why you prefer the ACV? Thanks!

 

[benzinojamin]

Hmm, the button top is what I tried with the s/u you are using, and mine works fine. How many of these do you have? Batts will vary in length a little, so maybe this is one that is just a little on the short side. If you have more than one, can you measure them? If you can, use calipers with electrical tape on the jaws of the calipers, and try a longer one, if you have one that is longer. Hope this helps.

No calipers unfortunately. I have 2 of these batteries and both perform very similar. The more I focus on it, it doesn't really decrease the quality of the vape. In fact, it not really noticeable with a RBA. When I put a carto on it's so damn noisy I can't help but notice the slight interruption in sound.

Thanks so much for the replies. The Efests will get me by in the short term no problem.

 

[andrebandre]

It was love at first sight for me.

PS. For some reason my photos upload all messed up even though they are pretty decent.

 

[wongster360]

I've had my eye on the Cyclone for so long; I don't understand why I don't own one yet. Could you elaborate a little more about the differences between the top caps and why you prefer the ACV? Thanks!

The standard cap is about the same size as an ERA top cap and has I think a .8mm airhole in it which is pretty small. The ACV as 2 slits in it one on each side depending on which side of the posts that you install your coil. There's an inner cap that rotates by twisting the top. It allows you to open the outter slits to whatever amount you want allowing you to adjust your draw to whatever your preference is. It's pretty slick how they've set this up. I'll try and post pics later if I can get a good closeup to show you.

 

[anavidfan]

LOL, wongster. I saw your signature and I thought of Steve Martins cover of "It im possible" he had a line " its impossible to put a Cadillac up you nose" I guess technically it IS possible but you might not make it out alive, unless it was a tiny model of a Cadillac

 

[joejoe]

It was love at first sight for me.

PS. For some reason my photos upload all messed up even though they are pretty decent.

do you have an extender on that atomizer? BTW, how do you like that atomizer? I have some Joyetech LR atomizers coming. Cheers.

 

[frazz]

Anyone try a ProTank with this yet? I'm wonder how it looks and functions. Photo's?

I am wondering this too... I have been through all 50+ pages and didn't see any pictures....if I missed them forgive me. I am wondering if the protank has any overhang?

 

[frazz]

I have never used one so I don't know the diameter, but does anyone know if a 2cent style fuse that will work with the simplicity?

 

[snork]

I have never used one so I don't know the diameter, but does anyone know if a 2cent style fuse that will work with the simplicity?

One of those fuses will not fit into the Simplicity. If there is a fuse which will fit into a 14500 battery tube mod I'm not aware of it.

 

[wongster360]

Protank - vapes ok. I'd have to rebuild the coil for it to vape better



Jonboy Lavatank - vapes better than the protank



And with a Kayfun 3.1 lol - vapes surprisingly well