America's Newest Submarine Tank

[P0P]

Hello armyvapr

I like it too its always fun and the least we could do to help our men and woman in the military so its kinda an add if you will for folks to donate during this Package run for X-mass

 

[P0P]

Afternoon pops!!!

Hi chatter how are you ?

 

[ARMYVAPR]

Hey POP,

do you sell the 5v box asembled?

 

[P0P]

Yes I have one left it is Wave mod 3.7 with a 510 using 14500 Bat

It comes with a 60 day warranty on parts and labor. I credit folks for return shipping if it is a problem no fault of there own.
fair is fair

 

[chatter97]

Still working, and vaping!!!

 

[Scottinboca]

Pop, I love that wood mod. I saw today on my USPS tracking that it's out for delivery. Not here today, must mean tomorrow. The USPS sucks this tome of the year! They get slammed.

 

[P0P]

you're not kidding we have double ordered stuff from other suppliers one was two weeks for expected delivery and had to order again from another supplier and the stuff was here in 2 days !!!!!

 

[sonicdsl]

OK, got a little nervous w/my Sub this afternoon. It started massively gurgling, and major leaking out the bottom of the carto (NOT from the tank!!). I got very blue about that thinking, oh great just my luck. Well when I got home from work, I decided to throw caution to the wind and refill the tank. And it worked perfectly again! So my theory is, don't let the level get to the holes in the carto. I'll find out soon if my theory holds true, but I'm pretty sure I'm right, and it's just learning for me!

GOOD NEWS TODAY! Real quick and gotta get to bed (YIKES!)... I let the liquid get down to almost nothing, the flavor was just starting to change. Worked perfectly up to that point. I refilled to almost full, and so far, still working perfectly!! I'm a happy vaper!!

Not sure what happened yesterday, but I'm sure it's something I did. I'm gonna let it get empty a couple of more times though to see if I can duplicate the problem, but at this point, my faith is restored, and I love this tank!

 

[FishmanTx]

Get an adapter, then 510's are no issue!

I can't. I'm stuck on volt cartos cuz everyone else is too "airy" like an analog with a hole in it. Any tight draw 510 cartos out there and I might try it. Just don't want to waste $$ on "might work". What's the diameter on 510 as compared to 808? It might be swappable with the (what was it?) red o-rings on it or black depends on if the 510 is smaller. If the same diameter and length, then I can use my modded 808s. I have a Liquinator and was NOT impressed at all. Fit was very loose and "airy". A pain to fill and deal with in my book.

 

[pwyll]

The drip tips are for "510 and 901/808" so they should at least be the same inner diameter...

 

[FishmanTx]

I have some steel 808s. Give me a chance to investigate this. I will let you know, but I think 808s are exact same size as 510s.

The drip tips are for "510 and 901/808" so they should at least be the same inner diameter...

Thanks Guys! I suspected the diameter because of the drip tip compatibility, but wasn't sure about the length. As long as the 510 is equal or shorter, I'm ok. (crossing fingers!)

 

[pwyll]

That I cannot help you with--I have never had an 808 :/

 

[Scottinboca]

Pop, I got my tank just now for my mailwoman. I opened that package. I want to say thanks for the syringe and the tweezers, not to mention the sample of Crazy Ape. I haven't used the tank yet. It seems to be a little rough-edged on the tube ends. I will find out in a little while how it preforms. So far it looks like it's going to work out.

 

[Scottinboca]

I've been using my submarine tank now all afternoon and it works flawlessly. Absolutely no leaking or a flooding gurgle. I love this tank!

 

[pwyll]

Pop, I got my tank just now for my mailwoman. I opened that package. I want to say thanks for the syringe and the tweezers, not to mention the sample of Crazy Ape. I haven't used the tank yet. It seems to be a little rough-edged on the tube ends. I will find out in a little while how it preforms. So far it looks like it's going to work out.

Cheap tanks are "flooding the market" right now. One of the reasons is that the polycarbonate tubing is not "finished." It only take a very little work to rub it lightly on a high-grit sandpaper to polish it if you want a more "professional look," but not having to sand/polish/finish the ends of hundreds of lengths of tubing is one of the reasons we can buy a tank for $10 or $12 that works as well as (or better than) a $40 or $50 tank.

Personally, I've got one of those sanding sponges for finishing curves in furniture--I just hold the tank flat against it and make some circles. Takes about 30 seconds per side and gives a nice, polished "professional" tank.

 

[Scottinboca]

I agree with you completely. I thought I would just give and out of the package post. It is super easy to get the edges smooth. I'm not even going to sand it, I don't even mind. I like to tell peps about products I like. I like this one a lot. I'm using it right now in fact. I got the regular sized one not the mini. I see that you can use this on any sized carto probably just by sliding down one of the end caps deeper into the tube. The tank is a definite great deal in my book. I may order another one in a little while.

Cheap tanks are "flooding the market" right now. One of the reasons is that the polycarbonate tubing is not "finished." It only take a very little work to rub it lightly on a high-grit sandpaper to polish it if you want a more "professional look," but not having to sand/polish/finish the ends of hundreds of lengths of tubing is one of the reasons we can buy a tank for $10 or $12 that works as well as (or better than) a $40 or $50 tank.

Personally, I've got one of those sanding sponges for finishing curves in furniture--I just hold the tank flat against it and make some circles. Takes about 30 seconds per side and gives a nice, polished "professional" tank.

 

[P0P]

GOOD NEWS TODAY! Real quick and gotta get to bed (YIKES!)... I let the liquid get down to almost nothing, the flavor was just starting to change. Worked perfectly up to that point. I refilled to almost full, and so far, still working perfectly!! I'm a happy vaper!!

Not sure what happened yesterday, but I'm sure it's something I did. I'm gonna let it get empty a couple of more times though to see if I can duplicate the problem, but at this point, my faith is restored, and I love this tank!

sonicdsl that is music to my ears glad its working good for you. I think folks are going to like these subs they are sold out they went pretty fast and I did save some for the troops and one customer bought some for them also really cool

 

[P0P]

I agree with you completely. I thought I would just give and out of the package post. It is super easy to get the edges smooth. I'm not even going to sand it, I don't even mind. I like to tell peps about products I like. I like this one a lot. I'm using it right now in fact. I got the regular sized one not the mini. I see that you can use this on any sized carto probably just by sliding down one of the end caps deeper into the tube. The tank is a definite great deal in my book. I may order another one in a little while.

Scottinboca

Whats up with this cold front (lol) I had to wear a flannel shirt tonight. Even under such ex-stream weather I unloaded all the Groceries with one hand and held my mod in the other. Glad you liken the sub buddy

 

[Scottinboca]

The last 2 winters we have had really weird colder winters. I have no idea whats happening. I'm saving money on AC though, so I can't complain.

Scottinboca

Whats up with this cold front (lol) I had to wear a flannel shirt tonight. Even under such ex-stream weather I unloaded all the Groceries with one hand and held my mod in the other. Glad you liken the sub buddy

 

[P0P]

I can handle this weather no problem. I wish i could say i was saving money though. My place in Va will fix that for me with the heating bill my kids probably have that on 80 actually I better call them NOW!! LOL