An Affordable RBA 2.0

[Evil Speakers]

Thanks for the updates. Did you guys drill out the air hole or leave it stock? I'm hoping the experience is good enough to allow me to get rid of my genny's and invest in a backup Reo and a couple more of these.

I left mine stock and to me it's perfect...

 

[ltrainer]

I have not drilled out the hole. I think most have not drilled out the holes. Some have drilled them out. A few wish they had not drilled out the hole. The best advise I've heard is to live with it a day or two before making a decision.

 

[Sterno]

i refuse to defile my RM2s by drilling on them stock hole is perfect for me

 

[card]

Are these going to be back in stock soon? Its the only thing holding back from buying my first reo grand.. I want to buy both at the same time and not waste my money on any of the other bottom feeder atomizers.

 

[CATastrophe]

I'm sure they will be. Rob stays on top of things. I'd check the site daily. Things get replenished often.

 

[Angi2299]

Are these going to be back in stock soon? Its the only thing holding back from buying my first reo grand.. I want to buy both at the same time and not waste my money on any of the other bottom feeder atomizers.

Just click on the "notify me" tab and you'll get an e-mail when they are back in stock. It normally doesn't take long for them to be added as long as Rob has everything he needs in his shop.

 

[super_X_drifter]

I enlarge the airhole to 1/16" on all my RBA's

 

[Angi2299]

Looks like more will be available on Monday, Card.


http://www.e-cigarette-forum.com/fo...tes-sales-information-most-recent-info-9.html

 

[redeyedancer]

I will be reloading the site on Monday if all goes as planed

 

[card]

Sweetness I was worried they wouldn't be back in stock until october 16th. Looks like monday will be the day! Gives me time to decide on what color grand to get

 

[lizardnipples]

I got the first build of my new RM2 done last night. First, I must commend Rob on a nice sturdy RBA. Waaaayyy different than the first one, very nice. The details were covered in this thing.

This is going to take a little fiddling to get right for me as I've never had such low profile posts and air hole placement. I love that Rob took the time to make those characteristics right in my opinion. I guess I'm used to the other ones that have the high posts and air hole that were more forgiving and a lot less tunable. I have to get used to the small details that will change the performance of this rba in an instant. I can't believe how adjusting the coil up, down, left and right in the smallest amount effected the result so much. Anywhere I put it changed the vape.

Last night I was wondering why the TH was unvapable so I looked down the DT hole and realized how low the air hole was and even though I had thought that my coil was pretty low I had the coil over the hole! OUCH

Anyway, I'll play with it to get it where I like it. What matters is that this has the potential and the ability to be great for everyone because of the adjustments that you can make. In the few coils I made last night and today I can tell I'm getting close. I do know that this thing throws out some clouds!!

Nice work on the quality and attention to detail on this one Rob!

 

[lizardnipples]

SXD I know you've done a couple vids on building these and I've watched them. I plan on re-watching tonight and pay attention to placement this time

Do you have any wisdom on coil position and what adjustments to what?

I think Karen had a post about it that I need to reread...it was something like if the coil is closer to the air hole then you get more TH, farther away more flavor...ect.

 

[nerak]

SXD I know you've done a couple vids on building these and I've watched them. I plan on re-watching tonight and pay attention to placement this time

Do you have any wisdom on coil position and what adjustments to what?

I think Karen had a post about it that I need to reread...it was something like if the coil is closer to the air hole then you get more TH, farther away more flavor...ect.

Yes, I did say that! I learned it here from many posts! I am still working on setting my coils where they need to be for me. I like flavor more than TH!

 

[super_X_drifter]

SXD I know you've done a couple vids on building these and I've watched them. I plan on re-watching tonight and pay attention to placement this time

Do you have any wisdom on coil position and what adjustments to what?

I think Karen had a post about it that I need to reread...it was something like if the coil is closer to the air hole then you get more TH, farther away more flavor...ect.

Yes. I. Do.
For starters, here's where I place my coil in plan view. (Looking straight down) its centered on the juice hole and parallel to the posts.

Vertically, I run it low for less TH. it's is about 1mm off the deck on the side away from the juice hole and gently sloped up to about 2mm above the deck on the juice hole side.
Like this:

That is a 30 ga coil. As pdib shared: high in relation to the airhole = more TH.
Low = low TH.

 

[lizardnipples]

SXD

You rock man...really cool of you!

Thanks!

 

[super_X_drifter]

SXD

You rock man...really cool of you!

Thanks!

Oh yeah cheers bro

Here's a pic the 27 ga one I'm runnin on my grand.

 

[lizardnipples]

Update:

With SXD's help I'm vaping myself green. Thanks Dude!

Sent from my SPH-L900 using Tapatalk 2

 

[pesky_human]

I saw a link last week indicating the atomizer that the RM2 is based on and I just did every search-fu that I am capable of and cannot find it anymore. Will someone remind me please? There was a link in some thread here in Reoville and I just cannot find it. Thanks!

 

[Dturp]

Here ya go

Triangle Stainless Steel Rebuildable Atomizer

 

[pesky_human]

Here ya go

Triangle Stainless Steel Rebuildable Atomizer

I'm going to go find the thread that was in now. It's killing me. Thanks fam!